ENERPAC WUD1300B Economy Electric Hydraulic Pump, Dump Valve, 0.5 Gallon Usable Oil, 115V

Enerpac WUD1300B hydraulic electric pump is designed to pressurise small to medium-sized fixtures for work-holding. Due to the compact size and lightweight, it is suitable for applications where the pump needs to be transported easily.

Features:

• Enerpac WUD1300B hydraulic electric pump comes with a 10-foot pendant to control valve and motor operation.
• It features a high-impact polyethylene constructed reservoir for assured protection, exceptional rigidity and high adaptability.
• This unit is attached with a large easy-carry handle to ensure ease of portability.
• It provides two-speed operation to minimse cycle times for advanced productivity.
• This model can start under full load and includes a 24VDC remote motor control for user safety & convenience.
• It is ideal for intermittent duty cycle and features a high-strength moulded shroud having an integral handle to prevent the motor from damage & contamination.

Compatible Accessories:

• Enerpac AP500 Accumulator Coupler Packages: They accommodate both double & single-acting circuits and include a relief valve fitted that offers ball check shut-off to ensure backflow checking inside a piping system.

Frequently Asked Questions:

Q. How to maintain a hydraulic electric pump?

A.

• Verify the oil levels in the power unit tanks.
• Check the oil for temperature fluctuations.
• Check the system for water or dirt in the oil.
• Verify for leaks.
• Check and tighten pipe clamps and screws.
• Check the values on the pressure gauge.
• Keep an eye on the electric motor's and the hydraulic oil pump's operating sounds for any changes.
• Drain all drip pans on the valve panel.
• Before inspecting an item, clean it with a cloth to check for any potential leaks in the valve groups.
• Keep the surfaces of the tanks, parts and pipes clean.
• Ask the operators if any service or maintenance is necessary.

Q. Which fluid is used in hydraulic cylinders?

A. Hydraulic fluid is a non-compressible oil or liquid used in hydraulic machinery and equipment to transfer power. Although numerous substances can be used to create this hydraulic fluid, it is typically made of mineral, petroleum, water or synthetic materials.

Q. What are the types of hydraulic cylinders?

A.

• Single-acting cylinders
• Double-acting cylinders
• Telescopic cylinders
• Jack cylinders

Q. What is the reservoir capacity and maximum pressure of this hydraulic cylinder?

A.

• Reservoir Capacity: 115.5 cu.inch.
• Maximum Pressure: 5000 psi

Q. What is the difference between single-acting and double-acting cylinders?

A. A single-acting hydraulic cylinder has a single port. The hydraulic fluid enters at this point and drives the plunger outward in one direction. There are two ports in a double-acting cylinder. One for the cylinder to be retracted and the other for the hydraulic fluid to enter and extend the plunger.