ENERPAC PATG-1102N Air Hydraulic Pump, 3/8 Inch Fluid Port NPT, 10000 PSI

Enerpac PATG1102N Turbo II air hydraulic pump can deliver high-quality pressurising performance with minimal effort compared to hand-driven hydraulic pumps and minimal energy consumption compared to electric hydraulic pumps. It is ideal for lifting, lowering, pulling & pushing loads up to specific stroke lengths in offshore, marine, engineering, aerospace, agricultural, oil & gas, mining and food & production applications.

Features:

• Enerpac PATG1102N Turbo II air hydraulic pump is suitable for use with single-acting cylinders for lifting or applying pressure to intermittent applications.
• This hydraulic pump is inherently quiet with only 76 dBA noise and low air consumption of 12 scfm.
• It comes with a three-position, hand / foot operated treadle for excellent pump air & valve control while advancing, holding & retracting the cylinder plungers.
• This hydraulic pump is operated at air pressures ranging from 40 to 125 psi and its reservoir can hold 127 cubic inch usable hydraulic oil.
• It features a reinforced, heavy-duty reservoir that allows solid contaminants to settle at the bottom and transfers heat from the system.

Compatible Accessories:

• Enerpac MTB1 Mounting Bracket Kit: This mounting bracket kit enables the Enerpac Turbo II to be mounted to horizontal or vertical surfaces.
• Enerpac HC9206C Hose: This six feet hose delivers hydraulic fluids (up to 10000 psi) while maintaining the integrity of the system.
• Enerpac HF101 Hydraulic Oil: This HF-series oil contains anti-sludge, anti-rust and anti-foam additives that help to prevent cavitation while also providing maximum volumetric efficiency and heat transfer.

Frequently Asked Questions:

Q. What are some safety features in this Enerpac PATG1102N Turbo II air hydraulic pump?

A. This hydraulic pump's reservoir features an internal pressure relief valve for protecting the unit in case of over-pressurising.

Q. What is the use of the return-to-tank port in this Enerpac PATG1102N Turbo II air hydraulic pump?

A. This hydraulic pump is equipped with a return-to-tank port for use in remote valve applications.

Q. What is this Enerpac PATG1102N Turbo II air hydraulic pump made of?

A. This pump features an air-saver piston with a rugged one-piece design to decrease air consumption, a heavy-duty reservoir & a high-efficiency cast aluminium air motor to increase the operating life & reduce air consumption.