EATON BW2175 Circuit Breaker, 120/240 VAC, 175A, 10 kA Interrupt, 2P

Eaton BW2175 circuit breaker is an Eaton Type BW main circuit breaker used for protecting connected devices from electrical damages due to overload (excess current) or short circuits. It controls power to the heating, air conditioning and refrigeration (HVAC) equipment.

Features:

• Eaton BW2175 circuit breaker accommodates 2 AWG to 300 kcmil wires made of aluminium or copper.
• Its plug-on mounting style with line side terminals allows easy installation on panels or switchboards.
• This 2-pole circuit breaker is equipped with thermal & magnetic contacts for quick protection of connected circuits.
• It combines in series with BD, BR, BQ, BQC & GFCB type breakers for interrupt rating of 22kAIC (with BRH main) and 25kAIC (with BWH main).

Compatible Accessories:

• Eaton ECB Type Unit Enclosures: This Eaton BW2175 breaker can easily fit onto these unit enclosures for smooth operation, easy control and preventing accidental contact of energized parts.
• Load Centres And Panels: This circuit breaker installs on the load centres for quick control of the connected circuits.

Standards and Approvals:

• Federal Spec Classification W-C375
• UL 489

Frequently Asked Questions:

Q. What are the different performance ratings of this Eaton BW2175 circuit breaker?

A. Eaton BW2175 breaker has a current rating of 175A, a voltage rating of 120 / 240V and an interrupt rating of 10kAIC.

Q. What are the reasons for frequent tripping of the circuit breaker?

A. A circuit overload, short-circuiting, ground fault surges, defective circuit breaker or an arc fault can cause tripping of the circuit breaker.

Q. What are points to inspect before operating this Eaton BW2175 circuit breaker?

A.

• Remove the dust, dirt, grease or moisture from the unit.
• Check that the mechanical linkages are free for tripping or switching the unit On / Off.
• Inspect the unit of any cracks, chipping, discolouration or burnt marks. Tighten the terminals & connectors. Check the mounting hardware.
• Remove any safety hazards near the installed area.