DESTACO G-122-45 Straight Line Action Clamp, 3 mm Clamping Stroke, 675 lb

Destaco G-122-45 variable stroke straight line action clamp is ideal for the automotive industry. It is designed for axial loads in operations where workpiece tolerances and thicknesses vary. This straight line action clamp is recommended for clamping between ribs and hollow spaces that are difficult to reach. It features a compact design that allows both single part and mass production. Destaco G-122-45 clamp is equipped with a locking lever / plunger (two handed operation) and hand wheel / hand lever (one handed operation) that can be operated either separately or simultaneously. This Destaco G-122-45 straight line action clamp is designed only for axial loads, and an additional radial support for the plunger is recommended with side loads. It has a foot mounted, flanged base for ease of installation and is capable of withstanding loads up to 675 lb.

Uses:

Destaco G-122-45 straight line action clamp is used for single part / mass production of fixtures in the automotive industry.

Features:

• Destaco G-122-45 straight line action clamp is ideally used for clamping workpieces having varying thicknesses and tolerances.
• This clamp has a foot mounted, flanged base for quick and secure installation.
• It utilises a plunger and a handle lever / hand wheel (operated simultaneously) to allow single or double handed operation for multiple applications.
• This G-122-45 clamp unit is capable of handling loads up to 675 lb.
• It provides clamping stroke of 3 mm.

Compatible Accessories:

• Destaco K1222, K508, K612 & K816: These swivel thrust pads are designed for the brand's G-122-45 action clamp to provide high performance automation, workholding and containment solutions.

Standards and Approvals:

Destaco G-122-45 straight line action clamp is ISO 9001:2015 and ISO 14001:2015 certified for utmost user safety and efficient performance.

Installation:

• Destaco G-122-45 straight line action clamp has a threaded body for thru-hole mounting to the surface.

Frequently Asked Questions:

Q. What is the significance of the red colour of the handle of Destaco clamps?

A. There is no such significance of the colour of the clamp's handle, as it only represents a recognisable area. This helps operators in finding the handle quickly & easily.

Q. What does clamping force mean?

A. Clamping force is the amount of force actually applied to the workpiece by closing & locking the clamp. It is normally less than the stated holding capacity. The actual clamping force depends on various factors, such as cylinder bore, cylinder area, spindle position (clamping arm length) and available air pressure. In most cases, the clamping force is approximately 2 to 3 times the force exerted by a pneumatic cylinder.

Q. Which grease is ideal for Destaco clamps for their rebuilding?

A. A coupling grease like Mobil XTC should be used when dealing with Destaco mechanical clamps, while the Magnalube G grease is great for use with pneumatic cylinder seals.

Q. Does Destaco supply any water resistant clamp sensors?

A. Yes, Destaco also supplies inductive sensors designed in accordance with IP65 standards to ensure protection from powerful hydraulic jets, dust & heavy rain.

Q. What does the clamp's holding capacity signify?

A. The holding capacity or holding force represents the capability of a clamp for holding down mechanical equipment or sheet metal while assembling automotive parts or during manufacturing processes.

Q. Are Destaco variable stroke straight line action clamps ideal for side loads?

A. These clamps are designed only for axial loads. To accomodate side loads, we would recommend an additional radial support for the plunger.