FREE delivery on orders over €150
Product Specifications:
| Item | Shaft Oil Seal |
| Case Coating | None |
| Contact Type | Contact Seal |
| For Fluid Type | Alcohol, Automatic Transmission Fluid, Cutting Oil, E.P. Lubricants, Engine Oil, Gasoline, Gear Oil, Grease, Hydrochloric Acid Solution, Light Oil/Kerosene, Machine Oil No.2, Petroleum Base Lubricating Oil, Sulfuric Acid Solution, Turbine Oil No.2, Water-Glycol |
| Hardness | 45 HRC @ 4 M/S And 55 HRC @ 10 M/S |
| Inside Dia. | 77 mm |
| Lip Material | Nitrile Rubber |
| Max. Pressure | 7 psi |
| Max. Surface Speed | 999 mps |
| Max. Temp. | 250°F |
| Min. Temp. | -40°F |
| No. Of Lips | 1 |
| Outside Dia. | 95 mm |
| Overall Width | 10 mm |
| Seal Design | SC |
| Seal Type | Single Lip Seal |
| Spring Reinforcement | Yes |
| Spring Type | Garter |
| System Of Measurement | Metric |
Shipping Info:
| Ship weight (kg) | 0.79 |
| Ship height (cm) | 1 |
| Ship length (cm) | 9.5 |
| Ship width (cm) | 9.5 |
Product Variants
| Model | Inside Dia. | Overall Width | Outside Dia. | Lip Material | Seal Type | Seal Design | Max. Pressure | No. Of Lips | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 10012010SC | 100 mm | 10 mm | 120 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €62.30 | |
| 10012012SC | 100 mm | 12 mm | 120 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €61.14 | |
| 10012013SC | 100 mm | 13 mm | 120 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €62.70 | |
| 10012510SC | 100 mm | 10 mm | 125 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €62.14 | |
| 10012512SC | 100 mm | 12 mm | 125 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €39.16 | |
| 10012513SC | 100 mm | 13 mm | 125 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €37.46 | |
| 10012515SC | 100 mm | 15 mm | 125 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €37.46 |
Explore Products
- APPROVED VENDOR 5DPJ0 Voluvessel 1600 Ml
- LABCONCO 711212110 Freeze Dryer, Console Freeze Dryer, 12 L Holding Capacity, -84 Deg C, Included, 230 V Volt
- MICRO 100 TM-600-16X Thread Milling Cutter, 0.6 Inch Cutter Dia., 0.1 Inch Length of Cut, 0.42 Inch Neck Dia.
- VERMONT GAGE 141155360 Plug Gage, Class X, Go, Steel, 0.5536 Inch Size
- ANVIL 2400015349 AS781 Series Open Angle Connector, 4-Hole, 22.5° Angle, Powder Coated Supr Green Finish
- NOBLES 1008637 Seal
- BALDOR MOTOR IDDRPM21404 Inverter Duty Motor, 460V, 1800 RPM, 60 Hz, 40 hp, 3 Phase, DPG-FV, RL2162 Frame
Explore More
- APM HEXSEAL
- KEYSHAFT
- ROBINAIR
- POLY-PLANAR
- SAGINAW
- HID Lamps and Bulbs
- Air Impact Wrenches
- PVC and CPVC Pipe
- Pneumatic Flow Control And Needle Valves
- Air Line Lockout Valves
- OIL SAFE Colour Coded Quick Connects, Female
- JACKSON SAFETY Due North All-Purpose Industrieal Ice Traction Aids-Replaceable Spikes
- TEMPCO Screw Plug Immersion Heaters, Steel Screw Plugs
- DAYTON Nitrile Impellers / Sleeve Assembly
- EDWARDS SIGNALING Lighted Pushbuttons
- APOLLO VALVES 88L-240 Series Low Temp. Flanged Full Port Ball Valves
- EATON Square Legend Plates
- BOSTON GEAR 48 Diametral Pitch Bronze Worm Gears
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DDS 779510SC Rotary Shaft Oil Seal, Sc, Nitrile, 77 mm ID, 95 mm Od, 10 mm Width, 7 Psi
€35.38 /unit

