DAYTON M1135222.00 Dc Gearmotor 125 Rpm 90v Tenv
Get it by Monday, Dec 22
€ 24,99 Flat Shipping + VAT € 24,99 flat shipping is applicable on orders with an aggregate weight less than 10kg. Orders exceeding 10kg will be charged default shipping rates.
10.00% off
€688.13 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | DC Gearmotor |
| Base To Center Of Shaft | 4" |
| Bearing Type | Ball On Motor, Heavy Duty Ball, Needle Roller, Thrust Balls On Case |
| Brush Type | Externally Replaceable |
| Full Load Current | 2A |
| Gear Case | Die Cast Aluminum |
| Gear Case Material | Die Cast Aluminum |
| Gear Material | Hardened Steel |
| Gear Ratio | 23:1 |
| Gear Type | Helical, Spur |
| Housing Material | Aluminum |
| Input Hp | 1/4 hp |
| Keyway Depth | 1" |
| Keyway Length | 1" |
| Keyway Width | 3/16" |
| Length Less Shaft | 11.31" |
| Lubrication | Permanent Heavy Fluid Gear Oil |
| Max. Ambient Temp. | 40°C |
| Maximum Torque | 100 lbs.-in. |
| Motor Enclosure | Totally Enclosed Non Ventilated |
| Motor Type | Permanent Magnet DC |
| Mount Hole Center-to-center Length | 2.5" |
| Mount Hole Center-to-center Width | 5" |
| Mounting | All Position |
| Mounting Orientation | Any Angle |
| Nameplate Rpm | 125 RPM |
| Operating Voltage | 90V DC |
| Output Shaft Diameter | 3/4" |
| Output Shaft Length | 1 5/8" |
| Overall Height | 5.57" |
| Overall Length | 12.94" |
| Overall Width | 6" |
| Overhung Load | 256 lbs. |
| Overhung Load Capacity | 256 lbs.-ft. |
| Reversible Shaft Output | No |
| Rotation | CW/CCW |
| Rpm Range | 100-150 RPM |
| Seal Type | Heavy Duty Industrial |
| Seals | Heavy Duty Industrial |
| Shaft Orientation | Parallel |
| Thermal Protection | No |
| Voltage | 90V DC |
Shipping Info:
| Ship weight (kg) | 8.55 |
| Ship height (cm) | 17.02 |
| Ship length (cm) | 42.93 |
| Ship width (cm) | 20.07 |
| HS code | 8501314000 |
| Country of Origin | US |
Product Variants
| Model | Nameplate Rpm | Input Hp | Gear Ratio | Overhung Load Capacity | Base To Center Of Shaft | Rotation | Gear Case | Thermal Protection | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1LPK5 | 21 RPM | 1/15 hp | 81:1 | - | - | Reversible | Die Cast Zinc | No | €687.48 | |
| 1LPK6 | 46 RPM | 1/15 hp | 38:1 | 250 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €687.48 | |
| 1LPK8 | 13 RPM | 1/15 hp | 135:1 | 250 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €744.48 | |
| 1LPL1 | 6.5 RPM | 1/15 hp | 267:1 | 250 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €678.31 | |
| 1LPV9 | 7 RPM | 1/30 hp | 430:1 | 50 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €486.52 | |
| 1LPW1 | 11 RPM | 1/30 hp | 273:1 | 50 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €559.15 | |
| 1LPW2 | 21 RPM | 1/30 hp | 141:1 | 50 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €556.01 |
Explore Products
- DESTACO 8EA-148-4-G Sensor Bar
- CONTINENTAL GH150-10CN-G Water Suction and Discharge Hose, 1 1/2 Inch Heightose Inside Dia, 50 psi, Green
- EATON XTAE050D00A5E100 Electronic Motor Starter, 50 A, 110 V 50 Hz, 120 V 60 Hz, 0No-0Nc, 55 mm, 20-100 A Xtoe
- ZURN RK212-ZW200R Repair Kit, Nylon Reinforced Buna-N, Rubber
- SALSBURY INDUSTRIES 3906S-04AFP Standard Horizontal MailBox, 4C, 17.5 x 51.75 x 19 Inch Size, 6 Door High
- EATON DH266FPK Safety Switch, 600VAC, 600 250 Hp At 240VAC, 500 Hp At 480, St Contact, 2P
- BROAN NUTONE FIN-6MD Motorized Damper 7 3/4 Inch Length, 7 3/4 Inch Height, 10 5/8 Inch Width
- ANVIL 0333314805 Nipple, XH, A106, Galvanized, Seamless, Pipe Size 1/2", Close Length 3"
Explore More
- APACHE MILLS
- KEYSHAFT
- OHAUS
- TPI CORP.
- MAILLON RAPIDE
- Indoor Trash Cans
- Dual Pressure Controls
- Flammable Cabinets
- Float Valves With Float
- Belts
- AKRO-MILS 30040 Shelfmax Shelf Bins
- MITUTOYO 571 Series Absolute Digimatic Depth Gages
- PROTO Impact Socket, 8 Point, 3/8 Inch Drive, Imperial
- MUELLER INDUSTRIES 101MHT Silent Check Valves
- AIR HANDLER V-Bank Minipleat W/Gasket, MERV 14
- AIRMASTER FAN Commercial Air Circulator Propellers
- EATON Power Xpert 1200 Series Meters
- HANDLE-IT Double High Starter Guard Rail
- RUBBERMAID Hardwares
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DAYTON M1135222.00 Dc Gearmotor 125 Rpm 90v Tenv
€764.59 /unit