DAYTON 1LPK6 Dc Gearmotor 46 Rpm 90v Tenv
Get it by Monday, Aug 17
€ 34,99 Flat Shipping + VAT € 34,99 flat shipping is applicable on orders with an aggregate weight less than 10kg. Orders exceeding 10kg will be charged default shipping rates.
5.00% off
€634.57 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | DC Gearmotor |
| Bearing Type | Ball On Motor, Porous Bronze Sleeve On Case |
| Brush Type | Externally Replaceable |
| Finish | Unpainted |
| Full Load Amps | 0.84A |
| Gear Case | Die Cast Zinc |
| Gear Case Material | Die Cast Zinc |
| Gear Material | Hardened Steel, Phenolic |
| Gear Ratio | 38:1 |
| Housing Material | Die Cast Zinc |
| Housing Material Finish | Unpainted |
| Input Hp | 1/15 hp |
| Insulation Class | Class F |
| Key Way Size | #605 |
| Keyway Type | Woodruff #605 |
| Lubrication | Grease Filled |
| Max. Ambient Temp. | 40°C |
| Max. Torque | 75 lbs.-in. |
| Motor Enclosure | Totally Enclosed Non Ventilated |
| Motor Type | Permanent Magnet DC |
| Mounting | All Position |
| Mounting Orientation | Any Angle |
| Nameplate Speed | 46 RPM |
| Operating Voltage | 90V DC |
| Output Shaft Dia. | 3/4" |
| Output Shaft Length | 1 1/2" |
| Overhung Load | 250 lbs. |
| Overhung Load Capacity | 250 lbs.-ft. |
| Replaceable Motor Brushes | Yes |
| Reversible Shaft Output | No |
| Rotation | CW, CCW |
| Seal Type | O-Ring Type On Output Shaft |
| Shaft | Single Output |
| Shaft Orientation | Parallel |
| Speed | 31-50 RPM |
| Thermal Protection | No |
| Voltage | 90V DC |
Shipping Info:
| Ship weight (kg) | 6.32 |
| Ship height (cm) | 16.76 |
| Ship length (cm) | 37.59 |
| Ship width (cm) | 20.83 |
| HS code | 8501312000 |
| Country of Origin | US |
Product Variants
| Model | Nameplate Speed | Full Load Amps | Housing Material | Speed | Gear Ratio | Rotation | Thermal Protection | Gear Case | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1LPK5 | 21 RPM | 0.84A | Die Cast Zinc | 16-30 RPM | 81:1 | Reversible | No | Die Cast Zinc | €667.97 | |
| 1LPK8 | 13 RPM | 0.84A | Die Cast Zinc | 0-15 RPM | 135:1 | CW, CCW | No | Die Cast Zinc | €723.35 | |
| 1LPL1 | 6.5 RPM | 0.84A | Die Cast Zinc | 0-15 RPM | 267:1 | CW, CCW | No | Die Cast Zinc | €659.06 | |
| 1LPV9 | 7 RPM | 0.35A | Die Cast Zinc | 0-15 RPM | 430:1 | CW, CCW | No | Die Cast Zinc | €570.47 | |
| 1LPW1 | 11 RPM | 0.35A | Die Cast Zinc | 0-15 RPM | 273:1 | CW, CCW | No | Die Cast Zinc | €577.21 | |
| 1LPW2 | 21 RPM | 0.35A | Die Cast Zinc | 16-30 RPM | 141:1 | CW, CCW | No | Die Cast Zinc | €574.00 | |
| 1LPW3 | 29 RPM | 0.35A | Die Cast Zinc | 16-30 RPM | 100:1 | CW, CCW | No | Die Cast Zinc | €552.46 |
Explore Products
- EATON HVX002A1-2A1B1B5C4D3 Adjustable Frequency Drive, EMC H, 1 ext, 3 RO, 2 HP, NEMA Type 1, 230 V
- MITEE-BITE PRODUCTS INC 26088 Clamps Low Profile 1/2-20 1-1/4 Inch
- EATON MSLWCVR12 Replacement Wireway Cover
- APPROVED VENDOR 3UCV6 Glass Vial With Septa 40ml
- EATON HMCP250J5C Motor Circuit Protector, 250A, 3-Pole, Frame J-K, 875-1750A, 600 V, 250 Vdc, Non-Aluminum
- SPEARS VALVES 3901-664C Reducer Tee, Socket, Schedule 80, 12 x 4 Size, CPVC
- GRAINGER M51250.060.0060 Set Screw, M6x1 Thread Size, Plain, 60 mm Lg., 5 mm Drive Size, Cone, Hex Socket
Explore More
- KEYSHAFT
- Rubber Edge Trim Seals
- Condiment Pumps and Dispensers
- Washing Machine Valves
- Threadlockers
- Soldering Kits
- GLOBE SCIENTIFIC Label Rolls, Cryo, Direct Thermal, 38 x 19 mm Size
- ANVIL AS2504 Series Square Washers With Channel Guide, Electro-Galvanized
- GLOBE SCIENTIFIC Diamond RealSeal Bottles, Narrow Mouth, Polypropylene
- INSTOCK Cast Aluminium Electrical Pedestal
- HUMBOLDT Sand Equivalent Shakers, Motorized
- SPEC Standard Compression Springs, Music Wire, 0.14 Inch Outside Dia.
- MERIT BRASS ADI Ductile Iron Back-Up Flanges
- MERIT BRASS X119 Hex Locknuts
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DAYTON 1LPK6 Dc Gearmotor 46 Rpm 90v Tenv
€667.97 /unit