DAYTON 4Z128 Dc Gearmotor 170 Rpm 90v Tenv
Get it by Thursday, Dec 18
€ 24,99 Flat Shipping + VAT € 24,99 flat shipping is applicable on orders with an aggregate weight less than 10kg. Orders exceeding 10kg will be charged default shipping rates.
10.00% off
€641.97 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | DC Gearmotor |
| Bearing Type | Ball On Motor, Needle Roller And Thrust Balls On Case |
| Brush Type | Externally Replaceable |
| Full Load Amps | 1.41A |
| Gear Case | Die Cast Aluminum |
| Gear Case Material | Die Cast Aluminum |
| Gear Material | Hardened Steel |
| Gear Ratio | 11:1 |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Mounting Position | All Angle |
| Gearmotor Shaft Orientation | Parallel |
| Housing Material | Aluminum |
| Input Hp | 1/8 hp |
| Length Less Shaft | 10.13" |
| Lubrication | Permanent Heavy Fluid Gear Oil |
| Max. Ambient Temp. | 40°C |
| Maximum Torque | 43 lbs.-in. |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Motor Type | Permanent Magnet DC |
| Mounting | All Position |
| Mounting Orientation | Any Angle |
| Nameplate Rpm | 170 RPM |
| Operating Voltage | 90V DC |
| Output Shaft Dia. | 5/8" |
| Output Shaft Length | 1 1/2" |
| Overall Length | 11.63" |
| Overhung Load | 150 lbs. |
| Overhung Load Capacity | 150 lbs.-ft. |
| Replaceable Motor Brushes | Yes |
| Reversible Shaft Output | No |
| Rotation | CW/CCW |
| Rpm Range | 151-200 RPM |
| Seal Type | Lip Type on Input, Output Shaft |
| Seals | On Input, Output Shaft |
| Shaft Orientation | Parallel |
| Tachometer Feedback | Yes |
| Thermal Protection | No |
| Voltage | 90V DC |
Shipping Info:
| Ship weight (kg) | 5.04 |
| Ship height (cm) | 21.08 |
| Ship length (cm) | 16 |
| Ship width (cm) | 37.59 |
| HS code | 8501314000 |
| Country of Origin | US |
Product Variants
| Model | Nameplate Rpm | Input Hp | Gear Ratio | Overhung Load Capacity | Base To Center Of Shaft | Rotation | Gear Case | Thermal Protection | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1LPK5 | 21 RPM | 1/15 hp | 81:1 | - | - | Reversible | Die Cast Zinc | No | €687.48 | |
| 1LPK6 | 46 RPM | 1/15 hp | 38:1 | 250 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €687.48 | |
| 1LPK8 | 13 RPM | 1/15 hp | 135:1 | 250 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €744.48 | |
| 1LPL1 | 6.5 RPM | 1/15 hp | 267:1 | 250 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €678.31 | |
| 1LPV9 | 7 RPM | 1/30 hp | 430:1 | 50 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €486.52 | |
| 1LPW1 | 11 RPM | 1/30 hp | 273:1 | 50 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €559.15 | |
| 1LPW2 | 21 RPM | 1/30 hp | 141:1 | 50 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €556.01 |
Explore Products
- EATON ECN0512TAA-R63/CL30 Magnetic Motor Starter, 4 to 20A, 24V AC, 7 1/2 HP At 3 Phase
- APOLLO VALVES 119KHCAMAA0120 ASME Section I Steam Cast Iron Safety Relief Valve, 120 psig, 2 Inch Size, x 3 Inch Size, Flange x FNPT
- SMC VALVES ASD330FM-N01-07S Dual Speed Controller, 1/8 Inch N Port Size
- LOVEJOY 68514439106 Inner Flange Assembly, Steel
- ADAPT-ALL 5063S-16-06 Elbow, 90 deg., Male S16 DIN Tube x Male 0.375 BSPT, Carbon Steel, Heavy Duty
- DORIAN CNCKH-5-O
- GROVE GEAR NH8520332.00 Worm Reducer, 40:1 Ratio, 1.375 Inch I.D, 2 Inch O.D, Cast Iron
- PIP 147-2-14/9 Electrical Safety Insulating Gloves, 9.5 Inch Size, Orange, Pair
Explore More
- BLANCETT
- KEYSHAFT
- NEWCO
- WESTWARD
- SECUREFIT
- Vehicle Stands
- Upblast Centrifugal Roof Vents Less Drive Pkg
- Plastic Angle Stock
- Dock Barricades
- Tool Steel Rods & Discs
- OIL SAFE Spill Decks
- LUMAPRO Electronic Ballasts
- ASSOCIATED SPRING RAYMOND CU18300 Gas Springs
- ACCURIDE SS2028 Series Light Duty 3/4 Extension Slides
- ANVIL 261 Series Riser Clamps, Steel, Hot-Dipped Galvanized
- SPEEDAIRE Single Acting Round Air Cylinder, Pivot Mount, 9/16" Bore Diameter
- VULCAN HART Cap
- THOMAS & BETTS Inner Sleeve Connectors
- GRAINGER Carbon Fiber Round Tubes
- STARRETT 92528 Series Advanz Carbide Tipped Band Saw Blades
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DAYTON 4Z128 Dc Gearmotor 170 Rpm 90v Tenv
€713.30 /unit