info@raptorsupplies.com WhatsApp +44 203 287 5224
DAYTON
DAYTON 4JPG1 Turbine Pump 2 Hp 1-phase 16.6/8.3 Amp | AD8EYC

DAYTON 4JPG1 Turbine Pump 2 Hp 1-phase 16.6/8.3 Amp

In Stock
Item: AD8EYC Model: 4JPG1
Check Availability
See variants (29)

Get it by Jun 19, Wednesday

Not eligible for flat shipping. Flat shipping is available on order value € or more and aggregate weight below 10 pounds.

€1,651.18 /unit
Add To Cart
Request a Quote

Payment Options Available

Delivery Options Available

Product Specifications:

ItemTurbine pump
Amps16.6/9.4-8.3
Bearing TypeBall
Best Efficiency GPM @ Head15.5 @ 75 Ft.
Best Efficiency Range GPM @ Head40 - 80 @ 19.4 - 14.9 Ft.
ConstructionBronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve.
Drain PlugEasily Accessible at Bottom
DutyContinuous
Frame56J
GPM7.4
GPM @ 10 PSI22.5
GPM @ 20 PSI21.5
GPM @ 30 PSI20.5
GPM @ 40 PSI19.4
GPM @ 50 PSI18.3
GPM @ 60 PSI17.2
GPM @ 75 PSI15.5
GPM @ 80 PSI14.9
Height8.26"
Housing MaterialCast Iron with nickel plating
HP2
Hz60
Impeller MaterialBronze
Impeller TypeOpen
Inlet1-1/4"
Inlet Pressure138 PSI
Length15.95"
Max. Case Pressure200 PSI
Max. Fluid Viscosity100 SSU
Max. Liquid Temp.-20 to 230 Degrees F
Max. Pressure100 psi
Max. Specific Gravity1
Motor EnclosureTEFC
Motor RPM3450
Motor TypeCapacitor-Start, Capacitor-Run
NEMA/IEC Frame56J
Outlet1"
Phase1
Screw MaterialZinc Plated
Seal ApplicationLong life When not Run Dry or Pumping Abrasives
Seal MaterialBuna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring
Seal TypeMechanical Seal
Service Factor1.2
Shaft Material304 Stainless Steel
Shaft Size5/8"
TypeCentrifugal
Voltage115/208-230
Volute MaterialCast Iron with Nickel Plating
Wetted MaterialsBronze, Cast Iron,Buna-N, Carbon, Ceramic and 316 Stainless Steel
Width8.8"

Shipping Info:

Ship weight (kg) 29.7
Ship height (cm)34.54
Ship length (cm)55.37
Ship width (cm)28.7
HS code8413702005
Country of OriginIN

Product Variants

ProductModelHPGPMAmpsBest Efficiency GPM @ HeadBest Efficiency Range GPM @ HeadConstructionDrain PlugFramePrice
DAYTON 4JPE9 Turbine Pump 2 Hp 3-phase 5.8/2.9 Amp | AD8EXR 4JPE929.96.0-5.8/2.912 @ 75 Ft.50 - 130 @ 15.3 - 2.9 Ft.Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve.Easily Accessible at Bottom56J€1,778.96
DAYTON 4JPF6 Turbine Pump 3/4 Hp 3-phase 2.5/1.2 Amp | AD8EXY 4JPF63/45.22.7-2.5/1.25.7 @ 75 Ft.60 - 100 @ 6.1 - 4.8 Ft.Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve.Easily Accessible at Bottom56J€1,216.40
DAYTON 4JPF9 Turbine Pump 1 1/2 Hp 3-phase 4.6/2.3 Amp | AD8EYB 4JPF91.56.14.6/4.5-2.37.0 @ 70 Ft.40 - 100 @ 8.3 - 5.6 Ft.Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve.Easily Accessible at Bottom56J€1,315.53
DAYTON 4JPG2 Turbine Pump 2 Hp 3-phase 5.8/2.9 Amp | AD8EYD 4JPG227.46.0-5.8/2.915.5 @ 75 Ft.40 - 80 @ 19.4 - 14.9 Ft.Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve.Easily Accessible at Bottom56J€1,362.95
DAYTON 4UP50 Pump Turbine 1/3 Hp | AD9TTW 4UP501/3--2.3 GPM @ 74 PSI2.1-3 GPM @ 80.0-26 PSIBronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats, Cast Iron Cover and Motor Bracket with Hard Electroless Nickel Plating and Replaceable Bronze Shaft Sleeve180 From Inlet Port-€1,291.82
DAYTON 4UP58 Pump Turbine 2 Hp | AD9TTY 4UP582-5.6-5.2/2.69.4 GPM @ 75 PSI16.7-23.0 GPM @ 90-26 PSIBronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats, Cast Iron Cover and Motor Bracket with Hard Electroless Nickel Plating and Replaceable Bronze Shaft Sleeve, TEFC Motors180 From Inlet Port56C€2,079.58
DAYTON 4UP66 Pump Turbine 7 1/2 Hp | AD9TUF 4UP667.5--30 GPM @ 155 PSI25.0-37.5 GPM @ 135-63 PSIBronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats180 From Inlet Port56C€5,028.57
View All

Explore Products

Explore More

Contact us

Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.

info@raptorsupplies.com

(730 - 1700 CET Mon-Fri)

+44 203 287 5224

We reply within 30 mins!

+31 20 217 0638

We reply within 30 mins!
DAYTON 4JPG1 Turbine Pump 2 Hp 1-phase 16.6/8.3 Amp
€1,651.18 /unit