info@raptorsupplies.com WhatsApp +44 203 287 5224
DAYTON
DAYTON 4JPE9 Turbine Pump 2 Hp 3-phase 5.8/2.9 Amp | AD8EXR

DAYTON 4JPE9 Turbine Pump 2 Hp 3-phase 5.8/2.9 Amp

In Stock
Item: AD8EXR Model: 4JPE9
Check Availability
See variants (29)

Get it by Jun 7, Friday

Not eligible for flat shipping. Flat shipping is available on order value € or more and aggregate weight below 10 pounds.

€1,778.96 /unit
Add To Cart
Request a Quote

Payment Options Available

Delivery Options Available

Product Specifications:

ItemTurbine pump
Amps6.0-5.8/2.9
Bearing TypeBall
Best Efficiency GPM @ Head12 @ 75 Ft.
Best Efficiency Range GPM @ Head50 - 130 @ 15.3 - 2.9 Ft.
ConstructionBronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve.
Drain PlugEasily Accessible at Bottom
DutyContinuous
Frame56J
GPM9.9
GPM @ 10 PSI18.7
GPM @ 100 PSI8.4
GPM @ 20 PSI17.8
GPM @ 30 PSI16.8
GPM @ 40 PSI15.8
GPM @ 50 PSI15.3
GPM @ 60 PSI13.8
GPM @ 75 PSI12
GPM @ 80 PSI11.4
Height7.1"
Housing MaterialBronze
HP2
Hz60
Impeller MaterialBronze
Impeller TypeOpen
Inlet1"
Inlet Pressure138 PSI
Length15.35"
Max. Case Pressure200 PSI
Max. Fluid Viscosity100 SSU
Max. Liquid Temp.-20 to 230 Degrees F
Max. Pressure120 psi
Max. Specific Gravity1
Motor EnclosureTEFC
Motor RPM3450
Motor Type3 Phase
NEMA/IEC Frame56J
Outlet1"
Phase3
Screw MaterialSS
Seal ApplicationLong life When not Run Dry or Pumping Abrasives
Seal MaterialBuna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring
Seal TypeMechanical Seal
Service Factor1.2
Shaft Material304 Stainless Steel
Shaft Size5/8"
TypeCentrifugal
Voltage208-230/460
Volute MaterialBronze
Wetted MaterialsBronze, Buna-N, Carbon, Ceramic and 316 Stainless Steel
Width8.8"

Shipping Info:

Ship weight (kg) 24.3
Ship height (cm)34.8
Ship length (cm)55.88
Ship width (cm)28.45
HS code8413702005
Country of OriginIN

Product Details:

    • GPM of Water @ 120 PSI (5.8)

Product Variants

ProductModelHPGPMAmpsBest Efficiency GPM @ HeadBest Efficiency Range GPM @ HeadConstructionDrain PlugFramePrice
DAYTON 4JPF6 Turbine Pump 3/4 Hp 3-phase 2.5/1.2 Amp | AD8EXY 4JPF63/45.22.7-2.5/1.25.7 @ 75 Ft.60 - 100 @ 6.1 - 4.8 Ft.Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve.Easily Accessible at Bottom56J€1,216.40
DAYTON 4JPF9 Turbine Pump 1 1/2 Hp 3-phase 4.6/2.3 Amp | AD8EYB 4JPF91.56.14.6/4.5-2.37.0 @ 70 Ft.40 - 100 @ 8.3 - 5.6 Ft.Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve.Easily Accessible at Bottom56J€1,315.53
DAYTON 4JPG1 Turbine Pump 2 Hp 1-phase 16.6/8.3 Amp | AD8EYC 4JPG127.416.6/9.4-8.315.5 @ 75 Ft.40 - 80 @ 19.4 - 14.9 Ft.Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve.Easily Accessible at Bottom56J€1,651.18
DAYTON 4JPG2 Turbine Pump 2 Hp 3-phase 5.8/2.9 Amp | AD8EYD 4JPG227.46.0-5.8/2.915.5 @ 75 Ft.40 - 80 @ 19.4 - 14.9 Ft.Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve.Easily Accessible at Bottom56J€1,362.95
DAYTON 4UP50 Pump Turbine 1/3 Hp | AD9TTW 4UP501/3--2.3 GPM @ 74 PSI2.1-3 GPM @ 80.0-26 PSIBronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats, Cast Iron Cover and Motor Bracket with Hard Electroless Nickel Plating and Replaceable Bronze Shaft Sleeve180 From Inlet Port-€1,291.82
DAYTON 4UP58 Pump Turbine 2 Hp | AD9TTY 4UP582-5.6-5.2/2.69.4 GPM @ 75 PSI16.7-23.0 GPM @ 90-26 PSIBronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats, Cast Iron Cover and Motor Bracket with Hard Electroless Nickel Plating and Replaceable Bronze Shaft Sleeve, TEFC Motors180 From Inlet Port56C€2,079.58
DAYTON 4UP66 Pump Turbine 7 1/2 Hp | AD9TUF 4UP667.5--30 GPM @ 155 PSI25.0-37.5 GPM @ 135-63 PSIBronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats180 From Inlet Port56C€5,028.57
View All

Explore Products

Explore More

Contact us

Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.

info@raptorsupplies.com

(730 - 1700 CET Mon-Fri)

+44 203 287 5224

We reply within 30 mins!

+31 20 217 0638

We reply within 30 mins!
DAYTON 4JPE9 Turbine Pump 2 Hp 3-phase 5.8/2.9 Amp
€1,778.96 /unit