DAYTON 4HFA6 Booster Pump Stainless Steel 1/2 Hp
Get it by Wednesday, Jul 1
€ 24,99 Flat Shipping + VAT € 24,99 flat shipping is applicable on orders with an aggregate weight less than 10kg. Orders exceeding 10kg will be charged default shipping rates.
5.00% off
€902.96 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Constant Pressure Booster System |
| Amps | 4.9A |
| Best Efficiency Flow Range @ Head | 13 to 14 GPM @ 34 to 56.5 ft. |
| Best Efficiency Flow Rate @ Head | 13.2 GPM @ 45 ft. |
| Best Efficiency Flow Rate @ Psi | 13.2 GPM @ 20 Psi |
| Best Efficiency Gpm @ Psi | 13.2 @ 20 |
| Compatible Discharge Pipe Size | 1" |
| Compatible Intake Pipe Size | 1" |
| Cord Length | 5 1/2" |
| Diffuser Material | Cast Iron |
| Discharge Flange Size | 1" |
| Discharge Type | NPT |
| Display Qty | 1 |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Duty-pumps | Continuous |
| Electrical Connection Type | Plug In |
| Flow Rate @ 15 Psi | 14.7 GPM |
| Flow Rate @ 20 Psi | 12.1 GPM |
| Flow Rate @ 25 Psi | 9 GPM |
| Flow Rate @ 30 Psi | 4.6 GPM |
| For Media Type | Water |
| For Use With Potable Systems | No |
| Frequency | 60 Hz |
| Gpm @ 15 Psi | 14.7 |
| Gpm @ 25 Psi | 9.0 |
| Gpm @ 30 Psi | 4.6 |
| Housing Material | Stainless Steel |
| Hp | 1/2 hp |
| Hp-pumps | 1/2 hp |
| Impeller Design | Closed |
| Impeller Material | Thermoplastic |
| Impeller Type | Closed |
| Included | Pump Controller |
| Intake Type | NPT |
| Max. Case Pressure | 75 psi |
| Max. Flow Rate | 13.4 GPM |
| Max. Flow Rate @ Psi | 22.9 @ 34.8 |
| Max. Gpm @ Psi | 22.9 @ 34.8 |
| Max. Inlet Pressure | 50 psi |
| Max. Media Temp. | 95°F |
| Max. Motor Ambient Temp. | 149°F |
| Max. Pressure Boost | 35 psi |
| Max. Solid Dia. | 1" |
| Max. Suction Lift | 25 ft. |
| Max. System Pressure | 33 psi |
| Media Type | Water |
| Min. Flow Rate | 2.9 GPM |
| Min. Flow Rate @ Psi | 22.9 @ 34.8 |
| Min. Gpm @ Psi | 22.9 @ 34.8 |
| Min. Inlet Flow | 22.9 GPM |
| Min. Inlet Flow Required | 22.9 |
| Min. Pressure Boost | 25 psi |
| Motor Ambient Temp. Rating | 65C/149F |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Type | Permanent Split Capacitor |
| No. Of Stages | 2 |
| No. Of Stages-pumps | 2 |
| Overall Height | 13.59" |
| Overall Length | 11 22/25" |
| Overall Width | 8 21/25" |
| Overload Protection | Yes |
| Overload Thermal Protection | Yes |
| Phase | 1 |
| Plug Or Connector Type | Direct Wire |
| Power Cord Length | 5 1/2" |
| Pressure | 0 psi to 34.8 psi |
| Pressure Switch Setting | 14.5 psi to 45 psi |
| Priming | Manual |
| Pump Housing Material | Stainless Steel |
| Pumping Application | Multi-Bath Homes |
| Seal Application | Clear Water Below 200 PSI |
| Seal Material | Buna N |
| Seal Type | Mechanical |
| Self Priming | Manual , No |
| Service Factor | 1.1 |
| Shaft Material | Stainless Steel |
| Shut Off Pressure | 34.8 psi |
| Stages | 2 |
| Suction Lift | 25 ft. |
| Tank Type | Tankless |
| Voltage | 115V AC |
| Wetted Material Grade | Grade 416 |
| Wheel Material | Bromine, Buna N, Carbon, Ceramic, Cast Iron, Stainless Steel, Thermoplastic |
Shipping Info:
| Ship weight (kg) | 9.54 |
| Ship height (cm) | 34.52 |
| Ship length (cm) | 30.18 |
| Ship width (cm) | 22.45 |
| HS code | 8413702040 |
| Country of Origin | CN |
Product Details:
- Max. PSI Boost @ 2-10 GPM (34.8)
- Max. PSI Boost @ 20 GPM (13.2)
- Max. PSI Boost @ 30 GPM (5.7)
Explore Products
- SPEC T42790 Extension Spring, High Precision, Stainless Steel, 69.8 mm Overall Length, Plain
- BLACKBURN (T&B) 54875LR34 Bushing, Pop-On, 1/2 Inch Size, Insulated
- EATON BR3030HC100V High AIC/Aid Main Circuit Breaker Load enter, 120/240 VAC, 100 A, 30 Pole
- COOPER B-LINE FIG 980-1/2-EG Swivel Sway Brace Attachment, Electro Galvanized, 17/32 Inch Hole Size, Steel
- VOLLRATH XMIX8312 Power Board
- DAYTON PP60155G Pipe Plug 1/4 NPT
- WAHL 450-065VC Non-Reversible Temp Indicator, Horizontal Strip, 4 Points
- MORSE CUTTING TOOLS 59014 Square End Mill, 3/8 Inch Dia., 1 Inch LOC, 3/8 Inch Shank Dia., 2-1/2 Inch OAL, 0.02 Inch RE, 4 Flute, Carbide
Explore More
- KEYSHAFT
- Foam Tape
- V-Belts
- Calibration Weights
- Insulation Boards
- Strain Relief Grips
- KUSHLAN PRODUCTS Power Concrete Screed Blades
- DESTACO 2002 Series Vertical Hold Down Clamps, Solid Bar
- BURNDY GB Type Mechanical Grounding Connectors
- ANVIL AS3126 Series Hold Down Clamps
- DIXON Nk-Series Plugs
- VULCAN HART Crumb Tray
- BALDOR / DODGE Bearing Kits
- SMC VALVES Vs3 Series Solenoid Valve
- VESTIL G8 Series Structural Rack Guards
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DAYTON 4HFA6 Booster Pump Stainless Steel 1/2 Hp
€950.48 /unit