DAYTON 40PM17 Radial Floor Drill Press 33 1/2 HP 120V
Get it by Thursday, Dec 25
10.00% off
€1,267.07 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Radial Floor Drill Press |
| Amps | 7A |
| Application | General Purpose Drill Press |
| Base Height | 14" |
| Base Length | 23 1/2" |
| Base Size | 14" x 23.5" |
| Capacity Cast Iron | 5/8" |
| Capacity Steel | 3/8" |
| Chuck Capacity | 5/8" |
| Chuck Size | 5/8" |
| Chuck Style | Keyed |
| Column Dia. | 2-3/4" |
| Column Dia. | 2 3/4" |
| Coolant System | No |
| Corded/banded | Corded |
| Corded/wireless | Corded |
| Current | 5.5A |
| Drill Press Application | Countersinking, Drilling, Reaming |
| Drill Press Type | Floor Stand |
| Drilling Capacity In Cast Iron | 5/8" |
| Drilling Capacity In Steel | 3/8" |
| Drilling Capacity Wood | Not Specified |
| Drive Type | Belt |
| Guard Included | No |
| Horsepower | 1/2 hp |
| Includes | Arbor, Chuck And Key |
| Max. Spindle To Base | 50" |
| Maximum Overall Height | 65" |
| Maximum Spindle Speed | 3300 RPM |
| Maximum Spindle-to-base Height | 50" |
| Maximum Spindle-to-table Height | 30" |
| Minimum Spindle Speed | 550 RPM |
| Number Of Pieces | 4 |
| Number Of Speeds | 5 |
| Number Of Spindle Speeds | 5 |
| Number Of T-slots | 0 |
| Overall Height | 65" |
| Overall Width | 14" |
| Phase | 1 |
| Power Downfeed Included | No |
| Power Source | Corded |
| Primary Material Application | Metal, Wood |
| Quill Dia. | 1-55/64" |
| Quill Dia. | 1.859" |
| Quill Diameter | 1 55/64" |
| Radial Arm | Yes |
| Radial Arm Length | 33" |
| Speed Control | Fixed |
| Speed Control Type | Step Pulley |
| Spindle Speed | 550 to 3300 rpm |
| Spindle Speed | 550-3300 RPM |
| Spindle Taper | 2MT |
| Spindle Taper | MT2, JT33 |
| Spindle To Table | 30" |
| Spindle Travel | 3-5/32" |
| Spindle Travel | 3.156" |
| Spindle-to-column Distance | 16 1/2" |
| Swing | 33" |
| Table Length | 10 3/8" |
| Table Shape | Square |
| Table Slot | Yes |
| Table Slot Size | 1/2" |
| Table Tilt | 45° |
| Table Width | 10 3/8" |
| Table Work Surface | 10 3/8" x 10 3/8" |
| Table Work Surface | 10-3/8" x 10-3/8" |
| Tilt Angle | 45° |
| Tilting Angle | 45 Degrees |
| Voltage | 120V AC |
Shipping Info:
| Ship weight (kg) | 72.9 |
| Ship height (cm) | 165.1 |
| Ship length (cm) | 83.82 |
| Ship width (cm) | 35.56 |
| Country of Origin | CN |
Product Details:
- Number of T-Slots : 0
- Drill Press Product Grouping : General Purpose Drill Presses
- Drilling Capacity Wood : Not Specified
- Power Down Feed Included : No
Explore Products
- MASTERDRIVES 7C85E Quick Disconnect Sheave, C Section, 7 Groove
- OSG 3111480 Ball End Mill, 2 Flutes, 1.4 mm Milling Dia, 1.1 mm Length Of Cut
- ARO PD10A-ACP-EVV Diaphragm Pump
- MILWAUKEE VALVE ML324T A K Butterfly Valve, With Gear Operated, Teflon Liner, Cast Iron, 2-1/2 Inch Valve Size
- WALTER SURFACE TECHNOLOGIES 01A520 Jobber Length Drill Bit, 5/16 In 135 Deg.
- MORSE CUTTING TOOLS 54826 Round Carbide Drill, ‎#60 Dia., 0.04 Inch Shank, 1/2 Inch Flute Length
- APOLLO VALVES 8210592 3 Pcs Full Port Bronze Ball Valve with Balancing Stop 1 Inch Size, 2 x FNPT
- ADVANCE TABCO TMG-240 Work Table, 30 X 24 Inch Size 16 Ga 304 Ss Top
Explore More
- ACORN
- AMERI-VENT
- JARKE
- KEYSHAFT
- NORLAKE
- Display Cases
- Engine Specialty Tools
- Vacuum Buffers
- Float Operated Drain Valves
- Grid Coupling
- PLAST-O-MATIC PRAM Series Air Loaded Pressure Regulators
- KRYTOX GPL 214 Series Extreme Pressure Grade Grease
- FERNCO Nominal Qwik Caps
- REGAL Taper Hand Taps, 8 Pitch, HSS, Nitride
- MAKITA O-Rings
- NORTON ABRASIVES Bear-Tex Vortex Rapid Prep AO Fine Grit H&L Discs, Non-Woven
- DAYTON Standard & Cogged V-Belts
- MURRELEKTRONIK Straight Cordsets
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DAYTON 40PM17 Radial Floor Drill Press 33 1/2 HP 120V
€1,407.86 /unit