DAYTON 2H588 Dc Gearmotor 15 Rpm 90v Tenv
Get it by Wednesday, Dec 24
€ 24,99 Flat Shipping + VAT € 24,99 flat shipping is applicable on orders with an aggregate weight less than 10kg. Orders exceeding 10kg will be charged default shipping rates.
10.00% off
€970.64 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | DC Gearmotor |
| Bearing Type | Ball On Motor, Needle Throughout |
| Brush Type | Externally Replaceable |
| Dimension A | 12.43" |
| Dimension D | 3.13" |
| Full Load Amps | 1.7A |
| Gear Case | Die Cast Aluminum |
| Gear Case Material | Die Cast Aluminum |
| Gear Material | Hardened Steel |
| Gear Ratio | 116:1 |
| Gear Type | Helical, Spur |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Mounting Position | All Angle |
| Gearmotor Shaft Orientation | Parallel |
| Housing Material | Aluminum |
| Input Hp | 1/6 hp |
| Length Less Shaft | 12 1/2" |
| Lubrication | Permanent Heavy Fluid Gear Oil |
| Max. Ambient Temp. | 40°C |
| Maximum Torque | 570 lbs.-in. |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Motor Type | Permanent Magnet DC |
| Mounting | All Position |
| Mounting Orientation | Any Angle |
| Nameplate Rpm | 15 RPM |
| Operating Voltage | 90V DC |
| Output Shaft Dia. | 3/4" |
| Output Shaft Length | 1 7/8" |
| Overall Length | 14.38" |
| Overhung Load | 900 lbs. |
| Overhung Load Capacity | 900 lbs.-ft. |
| Replaceable Motor Brushes | Yes |
| Reversible Shaft Output | No |
| Rotation | CW/CCW |
| Rpm Range | 0-15 RPM |
| Seal Material | Plastic |
| Seal Type | Spring Loaded Lip Type on Input, Output Shaft |
| Seals | Spring Loaded Lip Type On Input, Output Shaft |
| Shaft Dia. | 3/4" |
| Shaft Length | 1 7/8" |
| Shaft Orientation | Parallel |
| Tachometer Feedback | Yes |
| Thermal Protection | No |
| Voltage | 90V DC |
Shipping Info:
| Ship weight (kg) | 9.88 |
| Ship height (cm) | 22.86 |
| Ship length (cm) | 49.02 |
| Ship width (cm) | 24.38 |
| HS code | 8501314000 |
| Country of Origin | US |
Product Variants
| Model | Nameplate Rpm | Input Hp | Gear Ratio | Overhung Load Capacity | Base To Center Of Shaft | Rotation | Gear Case | Thermal Protection | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1LPK5 | 21 RPM | 1/15 hp | 81:1 | - | - | Reversible | Die Cast Zinc | No | €687.48 | |
| 1LPK6 | 46 RPM | 1/15 hp | 38:1 | 250 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €687.48 | |
| 1LPK8 | 13 RPM | 1/15 hp | 135:1 | 250 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €744.48 | |
| 1LPL1 | 6.5 RPM | 1/15 hp | 267:1 | 250 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €678.31 | |
| 1LPV9 | 7 RPM | 1/30 hp | 430:1 | 50 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €486.52 | |
| 1LPW1 | 11 RPM | 1/30 hp | 273:1 | 50 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €559.15 | |
| 1LPW2 | 21 RPM | 1/30 hp | 141:1 | 50 lbs.-ft. | - | CW/CCW | Die Cast Zinc | No | €556.01 |
Explore Products
- LINN GEAR 3030X1.937 Bushing, 1.937 Inch Bore Dia., 5.25 Inch Hub Diameter
- OSG 3053515 Ball End Mill, 2 Flutes, 3.5 mm Milling Dia, 2.8 mm Length Of Cut, 55 mm Overall Length
- PEER CHAIN 5143 Roller Chain, 40 Side Bow Pitch, 10 Feet Length
- MAIN FILTER INC. MF0060456 DHD660E10B Interchange Hydraulic Filter, Glass, 10 Micron, Viton Seal, 13.74 Inch Height
- RHEEM SP10764B Pilot Sensor, Commercial
- TEADIT SW316316P.112.150IR Metalflex Spiral Wound Gasket, 913M, 1-1/2 Inch Size, 150# Class, 316/PTFE Winding
- VOLKEL 27644 Hand Tap, DIN 352/HSS-G, M 9 x 1.25 Size, Set of 3 Pcs
- MERIT BRASS M614-3208 Hex Bushing, Size(a) 2 Inch, Size(b) 1/2 Inch
Explore More
- GUARDIAN
- KEYSHAFT
- STA-KON
- PEAK
- DEKKER VACUUM TECHNOLOGIES, INC.
- Communication Cables
- Tire Repair Tools
- Intake Louvers
- Flashlight Replacement Bulbs
- Laboratory Storage and Transfer Containers
- REESE Pintle Hook Mounting Plates
- CONDOR Leather Palm Knit Glove, Cowhide, ANSI Cut Level A3
- KEO Narrow Width Keyseat Cutters, Shank Type
- SUGATSUNE Wire Pull Handles
- TSUBAKI Roller Link A-1 Attachment
- BURNDY Copper Compression Lugs
- COOPER B-LINE Nuts Without Springs
- VERMONT GAGE Go Standard Thread Plug Gages, 1/4-20 Unc
- MITUTOYO 534 Series Long-Jaw Vernier Calipers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DAYTON 2H588 Dc Gearmotor 15 Rpm 90v Tenv
€1,078.49 /unit