CLEVELAND C95487 3200 Solid Router, Spiral Upcut, 1/8 In, 3/8 In, 1 1/2 In, 15 Degree Helix Angle
Get it by Tuesday, Dec 23
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Router |
| Coolant Fed | Non-Coolant Through |
| Cutter Dia. | 1/8" |
| Cutting Dia. | 1/8" |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 3/8" |
| End Mill Application | Roughing |
| End Mill Cutting Type | Center Cutting |
| End Type | Single End |
| Finish | Diamond Film |
| Finish - Machining | Diamond Film |
| Flute Type | Spiral Upcut |
| Grade | Grade C2 Micro Grain |
| Helix Angle | 15° |
| List Number | 3200 |
| Material | Carbide |
| Material - Machining | Carbide |
| Material Grade - Machining | Grade C2 Micro Grain |
| Measurement System | Fractional Inch |
| Number Of Flutes | 6 |
| Overall Length | 1 1/2" |
| Primary Material Application | Composite |
| Primary Material Application Iso Code | O |
| Router Bit Flute Type | Spiral Upcut |
| Shank Dia. | 1/8" |
| Shank Length | 1 1/8" |
| Single End/double End | Single End |
| System Of Measurement | Imperial |
Shipping Info:
| Ship height (cm) | 2.54 |
| Ship length (cm) | 4.45 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Model | Overall Length | Cutting Length | Shank Dia. | Number Of Flutes | Cutter Dia. | Cutting Dia. | Helix Angle | Flute Type | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| C95540 | 3" | 1 1/8" | 1/2" | 4 | 1/2" | 1/2" | 30° | Compression Spiral | - | RFQ
|
| C95538 | 2 1/2" | 3/4" | 1/4" | 4 | 1/4" | 1/4" | 30° | Compression Spiral | - | RFQ
|
| C95537 | 1 1/2" | 3/8" | 1/8" | 4 | 1/8" | 1/8" | - | Compression Spiral | - | RFQ
|
| C95539 | 3" | - | 3/8" | 4 | 3/8" | 3/8" | 30° | Compression Spiral | - | RFQ
|
| C95365 | 38 mm | 5 mm | 3 mm | - | 1.5 mm | 1.5 mm | 45° | Diamond Cut | - | RFQ
|
| C95423 | 38 mm | 5 mm | 3 mm | - | 1.5 mm | 1.5 mm | 45° | Diamond Cut | - | RFQ
|
| C95394 | 38 mm | 5 mm | 3 mm | - | 1.5 mm | 1.5 mm | 45° | Diamond Cut | - | RFQ
|
Explore Products
- PETERSEN PRODUCTS 147-0005-P10M Test Plug, High Pressure Test, 0.60 Inch Diameter, 1/8 Inch NPT Bypass Size
- EAGLE 1756 5 In Round Steel Bollard Post, 36 In High, Yellow with cap
- OSG 52309000 Exchangeable Head End Mill
- EATON DH364FGKLCR Heavy Duty Safety Switch, Single-Throw, 200A, 600V, 3-Pole, Fusible, Cam-Lok Reverse Pin
- EATON SVX060A1-4A1N1B1B2CA Adjustable Frequency Drive, 60HP, 1 RO, EMC H, Johnson Control, No Brake Chopper, FR7
- MAIN FILTER INC. MF0062079 FS111N3T250 Interchange Hydraulic Filter, Wire Mesh, 250 Micron Rating, Seal, 4.173 Inch Height
- T&S B-0104-LF Wall Hook, 3/4-14UN Male Outlet, 3/8 Inch NPT Female Inlet, Less Flange
- HELICOIL 3747-12 Mandrel, M12x1.75 Thread Size, Steel, AM, Metric Coarse
Explore More
- KEYSHAFT
- YSI
- ERICSON
- ACURITE
- TAPE LOGIC
- Alignment Tools
- Bell Traps and Drains
- Pneumatic Controls
- Spill Control Accessories
- Laboratory Clamps and Supports
- DESTACO 213 Series Horizontal Hold Down Clamps
- HELICOIL Complete Gages, Metric Fine, 4H5H
- CHICAGO PNEUMATIC CP26 Series Clutch Screwdrivers
- KEO NC Spotting Drills, 90 Degrees Point Angle
- LOVEJOY Saga Hubs, Rough Stock Bore
- PASS AND SEYMOUR Tamper Resistant Duplex Receptacles
- MITUTOYO Stands
- BALDOR / DODGE DLM, Two-Bolt Flange, Ball Bearings
- PRESTOLITE MOTORS Series Wound Brushed Drive Motor, 5 Inch Frame Size, 4 Pole
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C95487 3200 Solid Router, Spiral Upcut, 1/8 In, 3/8 In, 1 1/2 In, 15 Degree Helix Angle