FREE delivery on orders over €150
CLEVELAND C61670 0 Square End Mill, Center Cutting, 3 Flutes, 15/64 Inch Milling Dia, 3/4 Inch Length Of Cut
Item: CQ9VPHModel: C61670Cross Ref: 33FZ33 / 0
7 In Stock
Ships within 2 days via
10.00% off
€37.47 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Square End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip-breaker | No |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 3/4" |
| Cutting Type | Center Cutting |
| Dimension Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Square |
| End Type | Single End |
| Finish | Bright, Uncoated |
| Grade | General Purpose |
| Hardened Compatibility | No |
| Helix Angle | 30° |
| List Number | CEM-SE-3 |
| Material | Carbide |
| Material Grade - Machining | General Purpose |
| Measurement System | Fractional Inch |
| Milling Dia. | 0.234" |
| Milling Diameter | 15/64" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (n) Compatibility | Yes |
| Number Of Flutes | 3 |
| Overall Length | 2 1/2" |
| Primary Material Application | Cast Iron, Stainless Steel, Steel |
| Primary Material Application Iso Code | K, M, P |
| Shank Dia. | 1/4" |
| Shank Type | Straight |
| Single End/double End | Single End |
| Stainless (m) Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Imperial |
Shipping Info:
| Ship weight (kg) | 0.03 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8.2 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Product | Model | Number Of Flutes | Overall Length | Shank Dia. | List Number | Milling Dia. | Helix Angle | Length Of Cut | Cutting Length | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C61078 | 2 | 4" | 1" | CEM-SE-2 | 1" | - | - | 1 1/2" | €473.69 | |
|
C61082 | 2 | 5" | 1" | CEM-SE-2 | 1" | - | - | 2 1/4" | €681.88 | |
 |
C61083 | 2 | 6" | 1" | CEM-SE-2 | 1" | - | - | 3" | €787.63 | |
|
C61058 | 2 | 6" | 1/2" | CEM-SE-2 | 1/2" | - | - | 1 1/2" | €168.85 | |
|
C61053 | 2 | 3" | 1/2" | CEM-SE-2 | 1/2" | 35° | - | 1" | €105.90 | |
 |
C60655 | 2 | 3" | 1/2" | CEM-SEST-2 | 1/2" | 0° | - | 1" | €119.55 | |
|
C61057 | 2 | 4" | 1/2" | CEM-SE-2 | 1/2" | - | - | 2" | €141.41 |
Explore Products
- GORILLA MILL GM38RXL4015 10494 Carbide End Mill 4 Inch
- WHEELER-REX 532 Cutter Chain, 6 Inch Pipe Size
- USA SEALING ZSHAFT-178 Case-Hardened 1060 Carbon Steel Linear Shafts, 1 3/8 Inch Dia, 72 Inch Length
- BALDOR MOTOR EM2538T-CI Three Phase Motor, 230/460V, 3600 RPM, 60 Hz, 40 hp, ODP, 286TS Frame
- ARROW FASTENER FDN1014 Floor Kit, 120 1/8 Inch x 142 3/8 Inch x 2 Inch, Gray, Floor Levelling, Steel
- CLEVELAND C41122 0 Square End Mill, 4 Flutes, Bright Finish, 3/8 Inch Milling Dia, 3/4 Inch Cut
- DIXON VEP16BF16 Female Plug
- CLEVELAND C75120 0 Ball End Mill, High Speed Steel, Tin Finish, 2 Flutes, 1/8 Inch Milling Dia
Explore More
- CLE-LINE
- KEYSHAFT
- NEWBORN
- NIBCO
- LITTELFUSE
- Vent Adapters
- Rotary Joint Cartridges
- Air Files
- Steam and Hot Water Solenoid Valves
- General Purpose DC Motors
- LOC-LINE Flat 7 Hole Nozzle
- AKRO-MILS 30283 Akrobins Super Size Bins
- BALLYMORE Lock N Stock Ladders
- DESTACO 207 Series Vertical Hold Down Clamps, Straight Base, Solid Bar
- APPROVED VENDOR Welding Cable Connector
- SUPER-STRUT AB261 Series Channel Flat Plate
- LINCOLN ELECTRIC TIG Nozzles
- UNIWELD Adaptor And Connectors
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C61670 0 Square End Mill, Center Cutting, 3 Flutes, 15/64 Inch Milling Dia, 3/4 Inch Length Of Cut
€41.64 /unit