FREE delivery on orders over €150
CLEVELAND C41341 0 High Speed Steel End Mill 3/4 Inch D 3 Inch Cut L
Item: AC4ZFAModel: C41341Cross Ref: 31C761 / 0
7 In Stock
Ships within 2 days via
10.00% off
€150.90 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | High Speed Steel End Mill |
| Chip-breaker | No |
| Corner Radius | 5 1/4" |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 3" |
| Cutting Type | Center |
| Diameter | 3/4" |
| Dimension Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End | Single |
| End Mill Application | Finishing |
| End Mill Material | High Speed Steel |
| End Mill Style | Square |
| End Type | Single End |
| Finish | Bright |
| Grade | General Purpose |
| Helix Angle | 30° |
| Length Of Cut | 3" |
| Material | High Speed Steel |
| Material Grade | General Purpose |
| Milling Dia. | 3/4" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Number Of Flutes | 4 |
| Overall Length | 5 1/4" |
| Primary Material Application | Cast Iron, Copper, Steel |
| Primary Material Application Iso Code | K, N, P |
| Shank Dia. | 3/4" |
| Shank Type | Weldon Flat |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.23 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 13.69 |
| Ship width (cm) | 2.54 |
| HS code | 8207703030 |
| Country of Origin | US |
Product Variants
| Product | Model | Cutting Direction | Number Of Flutes | Shank Dia. | Overall Length | Milling Dia. | Length Of Cut | Helix Angle | Finish | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C42096 | Right Hand | 2 | 3/8" | 2 3/4" | 1/8" | 3/16" | 30° | Bright | €49.07 | |
 |
C39044 | Right Hand | 2 | 3/8" | 2 3/4" | 1/8" | 3/16" | 30° | - | €52.07 | |
 |
C39049 | Right Hand | 2 | 3/8" | 2 3/4" | 1/8" | 0.188" | 0.188" | - | €56.04 | |
|
C42051 | Right Hand | 2 | 3/8" | 3 1/16" | 1/8" | 3/8" | 30° | Bright | €54.82 | |
|
C33648 | Right Hand | 2 | 3/8" | 3 1/16" | 1/8" | 3/8" | 30° | - | €59.90 | |
|
C33689 | Right Hand | 2 | 3/8" | 3 1/16" | 1/8" | 3/8" | 30° | - | €63.49 | |
|
C33626 | Right Hand | 2 | 3/8" | 3 1/8" | 9/64" | 7/16" | 30° | Bright | €51.09 |
Explore Products
- EATON 8297A12H01 Interrupter Assembly, 2000A, 66 Ka
- BUSSMANN J60060-1CR Fuse Block
- TITAN FASTENERS JRF12384
- WATTS LFRK 909-CK2 2 1/2-3 0794101 Backflow Repair Kit, Second Check
- GROVE GEAR GR8240033.00 GR-B824-50-D Worm Reducer, 50:1 Ratio, 0.75 Inch I.D, 1.125 Inch O.D, Cast Iron
- UEI TEST INSTRUMENTS DL389B Clamp On Digital Clamp Meter, -22 To 752 Deg. F Temp. Range, 1.2 Inch Jaw Capacity
- KUNKLE 913BDCM33-KE Safety Relief Valve, Male X Female NPT, 1/2 Inch Inlet Size, Air/Gas, Stainless Steel
- SPEEDAIRE 4ZM17 Air Regulator 3/8 Inch Npt 83 Cfm 300 Psi
Explore More
- CDI CONTROL DEVICES
- KEYSHAFT
- WAHL
- TEMPO COMMUNICATIONS
- KINCO ELECTRIC
- Ice Dispensers
- Crowfoot Socket Wrenches
- Socket Head Cap Screws
- Safety Can Accessories
- Hydraulic Axle Jacks
- DESTACO 8100/8300 Series Pneumatic Swing Clamps
- IRONCLAD Kong Cut Resistant Gloves
- ASSOCIATED SPRING RAYMOND TU 3000 Gas Springs
- KEO NC Spotting Drills, 90 Degrees Point Angle
- ANVIL 212FP Series Seismic Bracing Clamps
- WALTER TOOLS Indexable Boring Bar Screw Held Clamp
- SPEARS VALVES PVC Supplemental End Connector Sets, SR Threaded Ends, EPDM
- TURTLESKIN CP-400 Insider Gloves
- DIXON Short Shank Female Hose NPSM Couplings
- STARRETT IP67 Electronic Digital Micrometers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C41341 0 High Speed Steel End Mill 3/4 Inch D 3 Inch Cut L
€167.67 /unit