CLEVELAND C33180 0 Square End Mill, Center Cutting, 4 Flutes, 1 Inch Milling Dia, 1 7/8 Inch Cut
Get it by Tuesday, Dec 23
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Square End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip-breaker | No |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 1 7/8" |
| Cutting Type | Center Cutting |
| Dimension Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Style | Square |
| End Type | Single End |
| Finish | Bright, Uncoated |
| Grade | General Purpose |
| Hardened Compatibility | No |
| Helix Angle | 30° |
| List Number | HG-4C |
| Material | High Speed Steel |
| Material Grade - Machining | General Purpose |
| Milling Dia. | 1" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (n) Compatibility | Yes |
| Number Of Flutes | 4 |
| Overall Length | 4 1/8" |
| Primary Material Application | Cast Iron |
| Primary Material Application Iso Code | K |
| Shank Dia. | 7/8" |
| Shank Type | Weldon |
| Stainless (m) Compatibility | No |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.32 |
| Ship height (cm) | 2.59 |
| Ship length (cm) | 12.29 |
| Ship width (cm) | 2.59 |
| Country of Origin | US |
Product Variants
| Product | Model | Milling Dia. | Number Of Flutes | Helix Angle | Shank Dia. | Overall Length | List Number | Cutting Direction | Length Of Cut | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C41652 | 1 1/4" | 2 | 30° | 1 1/4" | 4 1/2" | HG-2 | Right Hand | - | €221.90 | |
|
C41650 | 1 1/4" | 2 | 30° | 7/8" | 4 1/8" | HG-2 | Right Hand | - | €237.79 | |
 |
C41799 | 1 1/4" | 2 | 30° | 1 1/4" | 7 1/4" | HGN-2 | Right Hand | - | €371.14 | |
 |
C75209 | 1 1/8" | 2 | 30° | 3/4" | 3 7/8" | HG-2 | - | - | - | RFQ
|
|
C41648 | 1 1/8" | 2 | 30° | 1" | 4 1/2" | HG-2 | Right Hand | - | €215.63 | |
|
C41735 | 1 1/8" | 2 | 30° | 1" | 5 1/2" | HG-2 | Right Hand | - | €321.16 | |
|
C75212 | 1 3/8" | 2 | 30° | 3/4" | 3 7/8" | HG-2 | - | - | - | RFQ
|
Explore Products
- MILWAUKEE VALVE UPBA100XM A 112 Ball Valve, Low Lead Bronze, 2 Piece, Standard Port, 1 1/2 Inch Valve Size
- CLE-LINE C23363WM
- ANVIL 0330219056 Ready Cut Pipe, Standard, Black, 1/2 Inch Nominal Size (a), 30 Inch Nominal Size (b)
- PIP 353-2000-LY/5X Protective Clothing Rainwear Suit, 5XL, Hi-Vis Orange, Each
- APPROVED VENDOR 6AYT4 Male Elbow Brass 90 Degree 3/8 In
- MCR SAFETY 9423KM Knit Gloves, Size L, Glove Hand Protection, Cotton, 18 oz Fabric White, Knit Cuff
- SUPCO RIM10093
- GATES 36584996
Explore More
- CONTINENTAL INDUSTRIES
- HOBART
- KEYSHAFT
- MAXIM
- PBC LINEAR
- Louvered Racks and Panels
- Keyway Broach Bushings
- Drill Guide
- Wiring Combination Devices
- Fuel Filters
- ANSELL 28-359 Activarmr Nitrile Coating Cut Resistant Gloves
- ANSELL 83-500 Touchntuff Sterile Polyisoprene Gloves
- TYGON B-44-3 Tubings
- REVCOR Blower Wheels, Direct Drive, Double Inlet Forward Curve, Convex
- ANVIL AS400BTB Series Welded Channels
- HUBBELL WIRING DEVICE-KELLEMS Hard Wired Occupancy / Vacancy Sensor
- DAYTON Split Phase 50 Hz Motors, Open Dripproof
- WESCO Steel Frame Pedalifts - Two Wheel Hydraulic
- KELCH Shrink Fit Tool Holder, Hole Diameter 16 mmmm
- HOFFMAN 90 Degree Horizontal E Bend Sections
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C33180 0 Square End Mill, Center Cutting, 4 Flutes, 1 Inch Milling Dia, 1 7/8 Inch Cut