FREE delivery on orders over €150
CLEVELAND C33169 Square End Mill, Center Cutting, 4 Flutes, 3/4 Inch Milling Dia, 1 5/8 Inch Cut
Item: CQ9WHJModel: C33169Cross Ref: 438A60
7 In Stock
Ships within 2 days via
10.00% off
€120.01 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Square End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip-breaker | No |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 1 5/8" |
| Cutting Type | Center Cutting |
| Dimension Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Style | Square |
| End Type | Single End |
| Finish | Bright, Uncoated |
| Grade | General Purpose |
| Hardened Compatibility | No |
| Helix Angle | 30° |
| List Number | HG-4C |
| Material | High Speed Steel |
| Material Grade - Machining | General Purpose |
| Milling Dia. | 3/4" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (n) Compatibility | Yes |
| Number Of Flutes | 4 |
| Overall Length | 3 3/4" |
| Primary Material Application | Cast Iron |
| Primary Material Application Iso Code | K |
| Shank Dia. | 5/8" |
| Shank Type | Weldon |
| Stainless (m) Compatibility | No |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.14 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 10.01 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Product | Model | Milling Dia. | Number Of Flutes | Helix Angle | Shank Dia. | Overall Length | List Number | Cutting Direction | Length Of Cut | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C41652 | 1 1/4" | 2 | 30° | 1 1/4" | 4 1/2" | HG-2 | Right Hand | - | €221.90 | |
|
C41650 | 1 1/4" | 2 | 30° | 7/8" | 4 1/8" | HG-2 | Right Hand | - | €237.79 | |
 |
C41799 | 1 1/4" | 2 | 30° | 1 1/4" | 7 1/4" | HGN-2 | Right Hand | - | €371.14 | |
 |
C75209 | 1 1/8" | 2 | 30° | 3/4" | 3 7/8" | HG-2 | - | - | - | RFQ
|
|
C41648 | 1 1/8" | 2 | 30° | 1" | 4 1/2" | HG-2 | Right Hand | - | €215.63 | |
|
C41735 | 1 1/8" | 2 | 30° | 1" | 5 1/2" | HG-2 | Right Hand | - | €321.16 | |
|
C75212 | 1 3/8" | 2 | 30° | 3/4" | 3 7/8" | HG-2 | - | - | - | RFQ
|
Explore Products
- PRO1 IAQ T605-2 Low Voltage Thermostat, Electric Forced Air Furnaces/Gas Forced Air Furnaces/Millivolt
- SMC VALVES KQB2S06-01S Fitting, 6 mm
- CLEVELAND C04458 2120 Screw Machine Drill Bit, #18 Size, 1 1/16 Inch Flute Length
- HUBBELL WIRING DEVICE-KELLEMS RM2003PA001 Receptacle, Male, With 1 Feet Cable, 20 A, 3 Pole
- TITAN FASTENERS DAD16304
- BALDOR / DODGE 069792 F4S-IP-207LE IP Bearing, Bore Round, Steel, Shaft Size 2.4375 Inch
- OSBORN 0134906000
- RIDGID 31030 Straight Pipe Wrench, 24 Inch Length, Cast Iron
Explore More
- KEYSHAFT
- STEEL GRIP
- WELLER
- SUNLITE
- WHEEL CHECK
- Wash Fountain Parts
- Pneumatic Lubricators
- Crane Scales and Dynamometers
- Snap Action Switches
- Wire Connector Kits
- AKRO-MILS 30287 Akrobins Super Size Bins
- DWYER INSTRUMENTS PAFS-1000 Series Averaging Flow Sensors
- ANSELL 47-200 Activarmr White Green Nitrile Coated Gloves
- IRONCLAD Ranchworx Leather Work Gloves
- ALPHA FITTINGS Swivel Run Tee
- MARKAL Permanent Ink Marker
- MARTIN SPROCKET Hanger Bearings, Hard Iron
- MARTIN SPROCKET A-B Combination Taper Bushed 4 Groove Conventional Stock Sheaves
- BESSEY Vises
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C33169 Square End Mill, Center Cutting, 4 Flutes, 3/4 Inch Milling Dia, 1 5/8 Inch Cut
€133.34 /unit