CLEVELAND C32622 0 Square End Mill, Center Cutting, 4 Flutes, 21/64 Inch Milling Dia
Get it by Tuesday, Dec 23
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Square End Mill |
| Cast Iron (k) Compatibility | No |
| Chip-breaker | No |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 3/4" |
| Dimension Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Style | Square |
| End Type | Single End |
| Finish | TiCN |
| Grade | General Purpose |
| Hardened Compatibility | No |
| Helix Angle | 30° |
| List Number | HGC-4C-TC |
| Material | Cobalt |
| Material Grade - Machining | General Purpose |
| Milling Dia. | 21/64" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (n) Compatibility | No |
| Number Of Flutes | 4 |
| Overall Length | 2 1/2" |
| Primary Material Application | Stainless Steel, Steel |
| Primary Material Application Iso Code | M, P |
| Shank Dia. | 3/8" |
| Shank Type | Weldon |
| Stainless (m) Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | Yes |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.03 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8.2 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Product | Model | Milling Dia. | Overall Length | Number Of Flutes | Shank Dia. | List Number | Finish | Length Of Cut | Cutting Direction | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C42633 | 1 1/4" | 4 1/2" | 2 | 1 1/4" | HGC-2 | Bright, Uncoated | - | Right Hand | €194.93 | |
|
C75161 | 1" | 4 1/8" | 2 | 3/4" | HGC-2 | Bright, Uncoated | - | Right Hand | €145.67 | |
|
C75162 | 1" | 4 3/4" | 2 | 1" | HGC-2 | Bright, Uncoated | - | Right Hand | - | RFQ
|
|
C75160 | 1" | 4" | 2 | 5/8" | HGC-2 | Bright, Uncoated | - | Right Hand | €115.04 | |
 |
C75130 | 1/2" | 2 11/16" | 2 | 3/8" | HGC-2 | Bright, Uncoated | - | Right Hand | - | RFQ
|
|
C75131 | 1/2" | 3 1/2" | 2 | 1/2" | HGC-2 | Bright, Uncoated | - | Right Hand | €47.21 | |
 |
C75127 | 1/8" | 2 5/8" | 2 | 3/8" | HGC-2 | - | 3/4" | Right | - | RFQ
|
Explore Products
- PALMGREN 9625931 Swivel Base, 8 Inch Size
- APOLLO VALVES 87A2009P SS Full Port Ball Valve Double Packed 4 Inch Extended Bonnet with Monitoring Port 3 Inch Size, 2 x Flange
- MACROMATIC TH42264-12T Time Delay Relay, Single Shot Falling Edge, SPDT, 48V AC, 3 to 300 sec., Single Pin Trigger
- EATON DD322NWKW Single-Throw Fused Safety Switch, Double Door, 60A, 3-Pole, Four-Wire, 240 V, #14-#2 Awg
- APOLLO VALVES 70LF143HC Bronze 2 Pcs Ball Valve with Hose Thread with Cap and Chain 1/2, FNPT x Hose Connection, yellow, bronze
- MILWAUKEE 22-64-3000 Cord Set
- VERMONT GAGE 551108150 Tool Blank, HSS, 0.0002 Inch Tolerance
- SMC VALVES NCA1D250-0400-XB5 Tie Rod Cylinder, 2.5 Inch Size
Explore More
- CCL
- ELMA ULTRASONICS
- KEYSHAFT
- GRIT MITTS
- BOSCARO
- Hydraulic Bulk Hoses
- Pilot Point Drill Bits
- Cable and Wire Crimping Tools
- Conduit Body Covers and Gaskets
- Gladhands
- YELLOW JACKET Tube Cutters
- HELICOIL Complete Gages, Metric Coarse, 4H5H
- CONDOR Knit Gloves, Full Finger, Uncoated, 7 Gauge, White
- MUELLER INDUSTRIES 303AT Silent Check Valves
- WESTWARD HSS w/Oxide Coated Finish Step Drill Bit Set
- APPROVED VENDOR Hose Barb Brass
- WOODHEAD 130226 Series Gasket
- NIBCO Combination Ball Valve With Drain and PT Port
- GATES LOC Lock-On Hydraulic Hoses
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C32622 0 Square End Mill, Center Cutting, 4 Flutes, 21/64 Inch Milling Dia