FREE delivery on orders over €150
CLE-LINE C00728 Straight Flute Tap, #10-24 Thread Size, 7/8 Inch Thread Length, 2 3/8 Inch Length, Taper
Item: CQ9CPKModel: C00728Cross Ref: 407D84
7 In Stock
Ships within 2 days via
10.00% off
€15.50 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Straight Flute Tap |
| 65% Thread Drill Size | #23 |
| 75% Thread Drill Size | #25 |
| Extended Neck | Yes |
| Finish | Bright |
| Fits Class | Class 3B |
| Measurement System | Pipe |
| Number Of Flutes | 4 |
| Overall Length | 2 3/8" |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Steel |
| Primary Material Application Iso Code | K, N, P |
| Shank Dia. | 5/32" |
| Shank Length | 1 1/2" |
| Shank Type | Straight |
| Shank Type - Machining | Straight |
| Spiral Direction | Neutral |
| Square Size | 0.152" |
| Standards | USCTI Table 302 |
| Tap Chamfer | Taper |
| Tap Finish | Bright |
| Tap Length Standard | USCTI |
| Tap Material | High Speed Steel |
| Tap Shank Standard | USCTI |
| Tap Style | Straight Flute (Hand) |
| Thread Direction | Right Hand |
| Thread Length | 7/8" |
| Thread Limit | H2 |
| Thread Limit/class Of Fit | H2, 3B |
| Thread Size | #10-24 |
| Thread Standard | Coarse |
| Threads Per Inch | 24 |
Shipping Info:
| Ship weight (kg) | 0.01 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Product | Model | Thread Length | Thread Limit | Overall Length | Thread Size | Number Of Flutes | 75% Thread Drill Size | Shank Dia. | Thread Standard | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C00766 | - | H1 | 1 5/8" | #0-80 | 2 | 1.2 mm | 9/64" | Fine | €38.38 | |
 |
C00770 | 5/16" | H1 | 1 5/8" | #0-80 | 2 | 1.2 mm | 9/64" | Fine | €38.67 | |
 |
C00761 | 5/16" | H1 | 1 5/8" | #0-80 | 2 | 1.2 mm | 9/64" | Fine | €36.74 | |
 |
C62155 | 7/8" | H3 | 2 3/8" | #10-24 | 2 | #25 | 3/16" | Coarse | €18.15 | |
 |
C00730 | 7/8" | H2 | 2 3/8" | #10-24 | 4 | #25 | 5/32" | Coarse | €17.09 | |
 |
C62019 | 7/8" | H3 | 2 3/8" | #10-24 | 4 | #25 | 3/16" | Coarse | €16.34 | |
 |
C62018 | 7/8" | H3 | 2 3/8" | #10-24 | 4 | #25 | 3/16" | Coarse | €16.34 |
Explore Products
- VALLEY CRAFT F89264 Drum Lifter and Transporter, Strap, (37-51) x (25-32) x 63 Inch Size
- SHANNON INSULTECH HS-100-15X148 Heat Shield For 15X148
- CLE-LINE C21082 Reduced Shank Drill Bit, 19 mm Size, 152.40 mm Overall Length
- YANKEE 433-.3440 Chucking Reamer, 0.3440, 11/32 in Shank Dia, 1 1/2 in Flute Lg, 6 in Overall Lg
- T&S 001796-40 Nipple, 3/8 Inch NPT x 2-3/4 Inch Long
- ADVANCE TABCO BMACP2-B-SB Serving Counter Cold Pan, 31-13/16 X 35 X 53 Inch Size
- DEFELSKO POSITEST GM Gage Coating Mechanical 0 To 8 Mils
- CLEVELAND C71022 2001 Jobber Length Drill Bit, 11/32 Inch Size Drill Bit Size, 11/32 Inch Shank Dia
Explore More
- HOFFMAN
- KEYSHAFT
- BALDOR MOTOR
- TRINE
- PASLODE
- General Purpose AC Motors
- Spiral and Cartridge Rolls
- Cascade Airline Kits and Manifolds
- Table Numbers and Card Holders
- Conduit and Cable Hangers
- DESTACO 424, 441 Series Squeeze Action Plier Clamps
- CONDOR General Purpose Chemical Resistant Orange Gloves
- CONDOR Leather Gloves, Full Finger, Standard, Double Palm, Cowhide
- MUELLER INDUSTRIES 692M Duplex Basket Strainers
- GLOBE SCIENTIFIC Translucent Snap Caps, For 13 mm Tubes
- APPROVED VENDOR 45 Degree Elbow Inch Hub
- ACME ELECTRIC Non Linear Load Transformers, 480V Delta Primary Volts, K Factor 20, 150 Degrees C Rise
- RUBBERFAB Detectometer Tri Clamp Gaskets
- H.K. PORTER Center Cut Cutters, General Purpose
- PARKER 1207 Series Pargrip PFA Tube Grippers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLE-LINE C00728 Straight Flute Tap, #10-24 Thread Size, 7/8 Inch Thread Length, 2 3/8 Inch Length, Taper
€17.23 /unit