CLE-FORCE C68754 Taper Shank Drill, 1 Inch Size, RHS/RHC, 118 Deg. Radial Point, HSS, Steam Oxide
Get it by Monday, Dec 22
€74.30 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Taper Shank Drill |
Shipping Info:
| Ship weight (kg) | 0.9 |
| Ship height (cm) | 88.9 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 88.9 |
Product Variants
| Model | Decimal Equivalent | Flute Length | Overall Length | Drill Bit Point Angle | Drill Bit Point Type | Flute Type | Coolant Fed | Number Of Flutes | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| C21950 | - | - | - | - | - | - | - | - | €21.72 | |
| C21951 | - | - | - | - | - | - | - | - | €28.27 | |
| C21952 | 0.5039 | 111.13 mm | 209.55 mm | 118° | Radial Point | Spiral | Non Coolant Through | 2 | €28.27 | |
| C21953 | 0.5413 | 117.47 mm | 215.9 mm | 118° | Radial Point | Spiral | Non Coolant Through | 2 | €30.99 | |
| C21954 | - | - | - | - | - | - | - | - | €37.18 | |
| C21955 | 0.6398 | 130.17 mm | 228.6 mm | 118° | Radial Point | Spiral | Non Coolant Through | 2 | €39.91 | |
| C21956 | 0.7283 | 142.88 mm | 247.65 mm | 118° | Radial Point | Spiral | Non Coolant Through | 2 | €49.63 |
Explore Products
- EATON 26501-RBJ Gear Pump
- TRIUMPH TWIST DRILL 012446 Drill, Heavy-Duty, #46 Size, 135 Deg. Split Point, HSS, Black Oxide
- EATON EMS02D5EBL Electronic Motor Starter, All-In-One Panel, 208V, 8 To 12 FLA
- DDS 458508TCV Rotary Shaft Oil Seal, Tc, Fluoro, 45 mm ID, 85 mm Od, 8 mm Width, 10 Psi
- SPEC C11001124000M Compression Spring, 21.6 lbs/In Stiffness Rate, 34.36 lbs Load Capacity, Carbon Steel
- RIDGID 67193 Cordless Inline Bare Tool
- GRAINGER BULK-RS-H60-237 Buna-N Roll, 36 Inch X 60 Ft, 0.25 Inch Thickness, 60A, Plain Backing, Black, Smooth
Explore More
- CELLUCAP
- HUOT
- KEYSHAFT
- JACKSON SAFETY
- DDS
- Sanitary Gaskets
- Air Motors
- Confined Space Entry Systems and Carts
- Felt Sheets and Strips
- Grooved Pins
- PLAST-O-MATIC EBVC Series Heavy Duty ON/OFF Actuator Ball Valves
- DESTACO 5310 Series Horizontal Hold Down Clamps
- ACME ELECTRIC WI225 Series Medium Voltage Transformers, 3 Phase, 60Hz, 2.5kV & 5kV Class
- KEO Metric Combined Drills And Countersinks, Type A, 60 Degrees Countersink Angle
- VNE STAINLESS Long Tangent Elbow, 90 Degrees
- APPROVED VENDOR Elbow, 45 Degrees, Black
- EDWARDS SIGNALING 101 Series Flashing Halogens
- LB WHITE Ignition Controls
- MERIT BRASS XNL235 Companion Flanges
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLE-FORCE C68754 Taper Shank Drill, 1 Inch Size, RHS/RHC, 118 Deg. Radial Point, HSS, Steam Oxide
€74.30 /unit