BALDOR MOTOR VLECP4110T Vertical P-Base Motor, 230/460V, 1800 RPM, 60 Hz, 40 hp, TEFC, 324LP Frame
Get it by Tuesday, Dec 23
€15,863.60 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Vertical Pump Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 48A |
| Amps @ Voltage | 47A @ 460V, 94A @ 230V, 100A @ 208V |
| Amps @ Volts | 102A @ 208V, 96A @ 230V, 48A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 386 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Constant Torque Speed Range | 0.8 |
| Design Code | A |
| Drip Cover | Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 94.1% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 324LP |
| Frame Material | Iron |
| Frame Size | 324LP |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 47A |
| Hp | 40 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Duty |
| Kva Code | H |
| Lifting Lugs | Vertical Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max. Ambient Temp. | 40°C |
| Max. Motor Speed | 2700 RPM |
| Max. Rpm | 2700 RPM |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 8 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Vertical Lifting Lugs |
| Motor Type | 1260M |
| Mounting Type | Vertical Lifting Lugs |
| Nameplate Rpm | 1775 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 40 hp @ 60 Hz |
| Overall Length | 34.72" |
| Phase | 3 |
| Power Factor | 82 |
| Product Datasheet | baldor-motor-vlecp4110t.pdf |
| Product Family | Chemical Processing (Not Dc) |
| Pulley End Bearing Type | Thrust |
| Pulley Face Code | P Base |
| Pulley Shaft Indicator | P Base Groove, Key |
| Rpm | 1775 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 2 1/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Type | 1254M |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 230V @ 60 Hz, 460V @ 60 Hz |
| Xp Division | Not Applicable |
| Xp Temp Code | T3 |
Shipping Info:
| Ship weight (kg) | 270 |
| Ship height (cm) | 110.81 |
| Ship length (cm) | 78.42 |
| Ship width (cm) | 78.42 |
| HS code | 85015230 |
| Country of Origin | US |
Product Details:
- Constant Torque Speed Range: 0.8
- Drip Cover: Drip Cover
- Efficiency @ 100% Load: 94.10%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter duty
- KVA Code: H
- Lifting Lugs: Vertical Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 8 AWG
- No-Load Current: 0 A
- Product Family: Super-E Chemical Processing
- Pull-Up Torque: 193 LB-FT
- Pulley End Bearing Type: Thrust
- Pulley Face Code: P-Base
- Pulley Shaft Indicator: P-Base Groove & Key
- Shaft Diameter: 2.125 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 338 A
- Temp. Rise @ Rated Load: 54 deg C
- Temp. Rise @ S.F. Load: 64 deg C
Documentation:
Product Variants
| Model | Voltage | Hp | Nameplate Rpm | Frame | Insulation Class | Type | Amps | Power Factor | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| VLECP2333T | 230/460V | 15 hp | 1765 RPM | 254LP | Class F | 0944M | 18.1A | 84 | €8,523.44 | |
| VLECP2334T | 230/460V | 20 hp | 1770 RPM | 256LP | Class F | 0960M | 24A | 83 | €8,833.94 | |
| VLECP2394T | 230/460V | 15 hp | 3510 RPM | 254LP | Class F | 0934M | 17A | 91 | €8,798.91 | |
| VLECP3660T | 230/460V | 3 hp | 3500 RPM | 182LP | Class F | 0628M | 3.4A | 92 | €4,758.70 | |
| VLECP3661T | 230/460V | 3 hp | 1755 RPM | 182LP | Class F | 0632M | 4.1A | 77 | €4,864.72 | |
| VLECP3663T | 230/460V | 5 hp | 3490 RPM | 184LP | Class F | 0632M | 5.7A | 90 | €5,238.64 | |
| VLECP3665T | 230/460V | 5 hp | 1750 RPM | 184LP | Class F | 0642M | 6.6A | 80 | €4,903.54 |
Explore Products
- ECEF 67609005001 Anuba Key, 60mm Size
- MAIN FILTER INC. MF0128378 902043UM Interchange Hydraulic Filter, Glass, 3 Micron Rating, Viton Seal, 4.44 Inch Height
- BUNTING BEARINGS ES0004 Solid Powder Metal Bar, Size 1/2 x 6-1/2 Inch
- PRO-LINE HD7236C-H11 Ergo Workstation Be 72l x 36w x 30 To 36in.h
- SPEARS VALVES 897-040C Union, Socket x Socket, EPDM, 4 Size, CPVC
- SMC VALVES ISA3-GCP-M4NB-L1 Gap Checker, Range
- VOLKEL 86014 Round Die, Form AHSS BS 1127, G (BSPF) 1/4 x 19 Size
Explore More
- ALBION CASTERS
- CHEM-TECH
- ERTALYTE
- KEYSHAFT
- USEM
- Medical Scales
- High Speed Semiconductor Fuses
- Hard Hat Accessories
- Antistatic Accessories
- Built-in Locker Locks
- FABENCO ZT Series Full Coverage Self-Closing Safety Gates
- MUELLER INDUSTRIES 861CS-BC Y Strainers
- ANVIL AS3025 Series Post Bases
- GLOBE SCIENTIFIC Plug Stoppers, For 12 mm Tubes
- GLOBE SCIENTIFIC Diamond RealSeal Bottles, Narrow Mouth, Polypropylene
- MAXXIMA Light Strip
- DIXON Compression Union Reducers
- WESTWARD Springs
- BROWNING TGC60 Series Bushing Kits
- GRAINGER Fiberglass Epoxy Rods
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VLECP4110T Vertical P-Base Motor, 230/460V, 1800 RPM, 60 Hz, 40 hp, TEFC, 324LP Frame
€15,863.60 /unit