BALDOR MOTOR VLECP4106T Vertical P-Base Motor, 230/460V, 3600 RPM, 60 Hz, 20 hp, TEFC, 256LP Frame
Get it by Tuesday, Dec 23
€9,557.16 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Vertical Pump Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 22A |
| Amps @ Voltage | 44A @ 230V, 48A @ 208V, 22A @ 460V |
| Amps @ Volts | 48A @ 208V, 44A @ 230V, 22A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 121 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Constant Torque Speed Range | 6 |
| Design Code | A |
| Drip Cover | Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 91.7% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 256LP |
| Frame Material | Iron |
| Frame Size | 256LP |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 22A |
| Hp | 20 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Duty |
| Kva Code | J |
| Lifting Lugs | Vertical Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max. Ambient Temp. | 40°C |
| Max. Motor Speed | 5400 RPM |
| Max. Rpm | 5400 RPM |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 12 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Vertical Lifting Lugs |
| Motor Type | 0944M |
| Mounting Type | Vertical Lifting Lugs |
| Nameplate Rpm | 3540 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 2 |
| No. Of Speeds | 1 |
| Output @ Frequency | 20 hp @ 60 Hz |
| Overall Length | 26.08" |
| Phase | 3 |
| Power Factor | 92 |
| Product Datasheet | baldor-motor-vlecp4106t.pdf |
| Product Family | Super-E Chemical Processing |
| Pulley End Bearing Type | Thrust |
| Pulley Face Code | P Base |
| Pulley Shaft Indicator | P Base Groove, Key |
| Rpm | 3540 RPM |
| Rpm Range | 3400-3600 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 3600 RPM |
| Synchronous Rpm @ Frequency | 3600 RPM @ 60 Hz |
| Synchronous Speed | 3600 RPM |
| Type | 0944M |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 230V @ 60 Hz, 460V @ 60 Hz |
| Xp Division | Division II |
| Xp Temp Code | T3 |
Shipping Info:
| Ship weight (kg) | 150.75 |
| Ship height (cm) | 87.95 |
| Ship length (cm) | 63.18 |
| Ship width (cm) | 59.37 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - VLCP4106T
- Constant Torque Speed Range: 6
- Drip Cover: Drip Cover
- Efficiency @ 100% Load: 91.70%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter duty
- KVA Code: J
- Lifting Lugs: Vertical Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 12 AWG
- No-Load Current: 0 A
- Product Family: Super-E Chemical Processing
- Pull-Up Torque: 49.4 LB-FT
- Pulley End Bearing Type: Thrust
- Pulley Face Code: P-Base
- Pulley Shaft Indicator: P-Base Groove & Key
- Shaft Diameter: 1.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 183 A
- Temp. Rise @ Rated Load: 62 deg C
- Temp. Rise @ S.F. Load: 76 deg C
Documentation:
Product Variants
| Model | Voltage | Hp | Nameplate Rpm | Frame | Insulation Class | Type | Amps | Power Factor | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| VLECP2333T | 230/460V | 15 hp | 1765 RPM | 254LP | Class F | 0944M | 18.1A | 84 | €8,523.44 | |
| VLECP2334T | 230/460V | 20 hp | 1770 RPM | 256LP | Class F | 0960M | 24A | 83 | €8,833.94 | |
| VLECP2394T | 230/460V | 15 hp | 3510 RPM | 254LP | Class F | 0934M | 17A | 91 | €8,798.91 | |
| VLECP3660T | 230/460V | 3 hp | 3500 RPM | 182LP | Class F | 0628M | 3.4A | 92 | €4,758.70 | |
| VLECP3661T | 230/460V | 3 hp | 1755 RPM | 182LP | Class F | 0632M | 4.1A | 77 | €4,864.72 | |
| VLECP3663T | 230/460V | 5 hp | 3490 RPM | 184LP | Class F | 0632M | 5.7A | 90 | €5,238.64 | |
| VLECP3665T | 230/460V | 5 hp | 1750 RPM | 184LP | Class F | 0642M | 6.6A | 80 | €4,903.54 |
Explore Products
- VERMONT GAGE 951475800 Taperlock Gage Handle, #5, Gray, 1.1351-1.5100 Inch Size
- APPROVED VENDOR 90721 Pipe Steel 300 Psi 1 1/4 x 48 In
- EATON 2147A94G25 Vertical Bus Support Kit, 3P, For Use With Ampgard Mv Motor Control
- EATON C25DNM340A-GL Definite Purpose Contactor, 40A, Quick Connect, 110-120 Vac, 50/60 Hz, 3-Pole
- BRADY CPT-BLK-25PL-KD 150184 Lockout Padlock, Keyed Different, Nylon, Compact Body Size, Plastic, Black
- OSG 0148008 Spiral Flute Tap Bottom 9/16 Inch x 18 V Coating
- HUBBELL WIRING DEVICE-KELLEMS USB20C Usb Receptacle, 20A 125V, 2-P 3-W Grounding, 5-20R, Two 3.1 A Usb Port, Brown
- VERMONT GAGE 112306410 Pin Gage, Class ZZ, Go, Steel, 6.41 mm Size
Explore More
- BANJO FITTINGS
- KEYSHAFT
- KOCHEK
- IRON HORSE
- ZIPLINK
- Manhole Cover Lifters
- Hole Saws
- Covers
- Chemical-Resistant Pumps
- Pneumatic Globe Control Valves
- ACCURIDE 301-2590 Series Medium Duty Over Travel Slides
- CONDOR Deerskin Leather Gold Driver Gloves
- DEWALT Contractor Pro Safety Glasses
- TEMPCO Screw Plug Immersion Heaters, Copper Element
- ANVIL 026G Series Light Duty Two-Hole Pipe Straps
- SCOTT SAFETY SCBA Backframe Assemblies
- ACME ELECTRIC WI500 Series Medium Voltage Transformers, 3 Phase, 60Hz, 2.5kV & 5kV Class
- HUBBELL - BRYANT Industrial Triple Gripper Extra Heavy Duty Straight Blade Connectors
- SANDPIPER Bumpers
- ZOELLER Shark Series 840 Grinder Pumps
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VLECP4106T Vertical P-Base Motor, 230/460V, 3600 RPM, 60 Hz, 20 hp, TEFC, 256LP Frame
€9,557.16 /unit