BALDOR MOTOR VEM2333T Three Phase Enclosed Motor, 230/460V, 1800 RPM, 60 Hz, 15 hp, TEFC, 254TC Frame
Get it by Friday, Dec 19
€4,503.11 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 18.1A @ 460V, 36.2A @ 230V, 38A @ 208V |
| Amps @ Volts | 38A @ 208V, 36.2A @ 230V, 18.1A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 152 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 92.4% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 254TC |
| Frame Material | Iron |
| Frame Size | 254TC |
| Frequency | 60.00 Hz |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 38A @ 208V, 36.2A @ 230V, 18.1A @ 460V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 18.1A |
| Hp | 15 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 12 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Type | 0944M |
| Mounting Type | C Face, Footless |
| Nameplate Rpm | 1765 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 15 hp @ 60 Hz |
| Overall Length | 23.86" |
| Phase | 3 |
| Power Factor | 84 |
| Product Datasheet | baldor-motor-vem2333t.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C Face |
| Pulley Shaft Indicator | Standard |
| Rpm | 1765 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 208-230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 127.35 |
| Ship height (cm) | 49.85 |
| Ship length (cm) | 78.74 |
| Ship width (cm) | 60.33 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - VM2333T
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 92.40%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: H
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 12 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 69.5 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 125 A
- Temp. Rise @ Rated Load: 58 deg C
- Temp. Rise @ S.F. Load: 71 deg C
Documentation:
Product Variants
| Product | Model | Voltage | Hp | Mounting Type | Service Factor | Nameplate Rpm | Motor Type | Insulation Class | Frame Material | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
KENM3454 | 230/460V | 1/4 hp | C Face, Footless | 1.15 | 1750 RPM | Three Phase | Class F | Steel | €799.91 | |
|
KENM3534 | 230/460V | 1/3 hp | C Face, Footless | 1.15 | 1750 RPM | Three Phase | Class F | Steel | €882.26 | |
|
KENM3535 | 230/460V | 1/3 hp | C Face, Footless | 1.15 | 1150 RPM | Three Phase | Class F | Steel | €1,296.89 | |
 |
KM3454 | 230/460V | 1/4 hp | C Face, Footless | 1.35 | 1735 RPM | Three Phase | Class B | Steel | €740.94 | |
 |
KM3457 | 230/460V | 1/3 hp | C Face, Footless | 1.35 | 3450 RPM | Three Phase | Class B | Steel | €756.78 | |
|
KNM3454 | 208-230/460V | 1/4 hp | C Face, Footless | 1 | 1725 RPM | Three Phase | Class F | Steel | €542.42 | |
|
KNM3534 | 208-230/460V | 1/3 hp | C Face, Footless | 1 | 1725 RPM | Three Phase | Class B | Steel | €600.17 |
Explore Products
- GOODYEAR ENGINEERED PRODUCTS GTR-30G-8M-12 Pulley Falcon Pd 30 Grooves 22 Mm W
- SANDPIPER S05B1ABWA6S600. Ball Valve AODD Pump, Standard Duty, Metallic, 1/2 Inch Port Size
- GATES 213-181321K HOSE KIT
- BALDOR / DODGE 389591 TXT4A Counter Shaft Bearing Kit
- OSG VGM5-0241 Square End Mill, Center Cutting, 5 Flutes, 3/4 Inch Milling Dia, 3 3/4 Inch Length Of Cut
- 80/20 25-4113 Inside Corner Bracket, 4 Hole, 25mm x 47mm x 25mm, Aluminum, Clear
Explore More
- ELMO RIETSCHLE
- KEYSHAFT
- MACURCO
- ARCTICWALKINS
- LOCKJAW
- Thermal Imagers
- Cabinet Catches and Latches
- Fire and Rescue Fans
- Electric Shear Accessories
- Cold Air Guns
- DESTACO 2017 Series Horizontal Hold Down Clamps
- ANVIL AS689 Series Adjustable Corner Connectors, Double Slotted
- ANVIL AS809 Series Double Channel Brackets
- MASTER APPLIANCE Nozzles
- HUB CITY Side Mounting Kits
- NORTON ABRASIVES Bear-Tex Rapid Prep AO Medium Grit File Belts, Non-Woven
- STARRETT 94367 Series Meatkutter Frozen Bi-Metal Band Saw Blade
- ZSI-FOSTER Cush A Block CBN DS Series Adjustable Width Duct Supports
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VEM2333T Three Phase Enclosed Motor, 230/460V, 1800 RPM, 60 Hz, 15 hp, TEFC, 254TC Frame
€4,503.11 /unit