BALDOR MOTOR VEBNM3554T-D General Unit Handling Motor, 230/460V, 1800 RPM, 60 Hz, 1.5 hp, TENV, 145TC Frame
Get it by Friday, Dec 19
€2,512.35 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Brake Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 2.1A @ 460V, 4.2A @ 230V, 4.4A @ 208V |
| Amps @ Volts | 4.4A @ 208V, 4.2A @ 230V, 2.1A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 19.9 lbs.-ft. |
| Conduit Box Material | Steel |
| Conduit Box Position | F3 |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 86.5% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TENV |
| Feedback Device | NO FEEDBACK |
| Frame | 145TC |
| Frame Material | Steel |
| Frame Size | 145TC |
| Frequency | 60 Hz |
| Front Face Code | Brake Mounting |
| Full Load Amps | 2.1A |
| Full Load Torque | 0 lbs.-ft. |
| Full Load Torque | 0 ft.-lbs. |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 2.1A |
| Hp | 1 1/2 hp |
| Insulation Class | Class H |
| Inverter Code | Inverter Duty |
| Kva Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max. Ambient Temp. | 40°C |
| Motor Enclosure Design | Totally Enclosed Non Ventilated |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 18 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | C Face Footless |
| Motor Type | 3534M |
| Mounting Type | C Face, Footless |
| Nameplate Rpm | 1770 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 1 1/2 hp @ 60 Hz |
| Overall Length | 16.88" |
| Phase | 3 |
| Power | 1.1 kW |
| Power Factor | 72 |
| Product Datasheet | baldor-motor-vebnm3554t-d.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C Face |
| Pulley Shaft Indicator | Standard |
| Rpm | 1755 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1 |
| Shaft Dia. | 7/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Starting Method | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Type | 3534M |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 27.9 |
| Ship height (cm) | 38.42 |
| Ship length (cm) | 54.93 |
| Ship width (cm) | 40.96 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - VBNM3554T-D
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 86.50%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: K
- Lifting Lugs: No Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 18 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 10.98 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 0.875 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 19.8 A
- Temp. Rise @ Rated Load: 88 deg C
- Temp. Rise @ S.F. Load: 104 deg C
Documentation:
Product Variants
| Product | Model | Voltage | Hp | Nameplate Rpm | Frame | Rpm Range | Motor Application | Insulation Class | Power Factor | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
VBM3538-D | 208-230/460V | 1/2 hp | 1740 RPM | 56C | - | - | Class F | 63 | €1,935.86 | |
|
VBM3542-D | 208-230/460V | 3/4 hp | 1750 RPM | 56C | - | - | Class F | 74 | €2,009.69 | |
 |
VBNM3538-D | 208-230/460-480V | 1/2 hp | 1800 RPM | 56C | 1700-1800 RPM | - | Class F | 63 | €1,916.31 | |
|
VBNM3542-D | 208-230/460V | 3/4 hp | 1750 RPM | 56C | - | - | Class F | 74 | €2,056.07 | |
 |
VEBM3542-D | 208-230/460V | 3/4 hp | 1765 RPM | 56C | 1700-1800 RPM | - | Class F | 74 | €2,205.65 | |
|
VEBM3546-D | 208-230/460V | 1 hp | 1760 RPM | 56C | - | - | Class F | 69 | €2,294.62 | |
|
VEBM3546T-D | 208-230/460V | 1 hp | 1760 RPM | 143TC | 1701-1800 RPM | - | Class F | 69 | €3,889.08 |
Explore Products
- HUB CITY 0270-10038 Worm Reducer, 11.922 Hp, 1.875 Inch I.D, 0.875 Inch O.D, Stainless Steel
- TUNGALOY 6818306 Parallelogram Milling Insert, 0.264 Inch Inscribed Circle, 0.40 mm Corner Radius
- MI-T-M 24-0258 Pipe Nipple
- JACKSON SAFETY 14679 Electrode Holder, 250 A
- EATON SPI041A1-5A3N1 Active Front End Dc Bus Drive Inverter Unit, 575 VAC, 41 A
- APPLETON ELECTRIC HUB75B Conduit Hub, Size 3/4 Inch
- STAFFORD MFG 34LM018P5 Metric Shaft Collar, Set Screw Type, 18mm Bore, Steel
Explore More
- KEYSHAFT
- M A FORD
- BLACKBURN SAMPLING
- VOLKEL
- ELC SECURITY PRODUCTS
- Prep and Hold Utensils
- Drill Bit and Tap Sets
- Hand Ratchets
- Flexible Metal Hoses
- Plumb Bobs
- CONDOR PU Coated Cut Resistant Gloves, Cut Level A5
- ANSELL Class 00 Electrical Gloves, 11 Inch, Yellow
- VIEGA PROPRESS Male Adapter, Bronze, FTG x MNPT
- SUGATSUNE Edge Pull Handles
- REVVO Swivel Stem Caster
- GLEASON Festoon System Kit
- JOHNSON Combination Squares
- TMI Replacement Strips
- BLICKLE HPO Series Rollers For Pallet Trucks
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VEBNM3554T-D General Unit Handling Motor, 230/460V, 1800 RPM, 60 Hz, 1.5 hp, TENV, 145TC Frame
€2,512.35 /unit