BALDOR MOTOR VBM3538 Brake Motor, 208-230/460V, 1800 RPM, 60 Hz, 0.5 hp, 3 Phase TENV, 56C Frame
Get it by Tuesday, Dec 23
10.00% off
€1,925.23 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Brake Motor |
| Ac/dc | AC |
| Ambient Temp. | 40°C |
| Amps | 1.9-1.8/0.9A |
| Amps @ 208v | 1.9A |
| Application | General Application |
| Base Type | Not Applicable |
| Bearing Type | Ball |
| Break-down Torque | 6.8 lbs.-ft. |
| Class | Class B |
| Code | K |
| Conduit Box Position | F1 |
| Design Code | B |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Enclosure Design | TENV |
| Frame | 56C |
| Frame Material | Steel |
| Frame Size | 56C |
| Frequency | 60 Hz |
| Full Load Amps | 0.9/1.8/1.9A |
| Full Load Torque | 1.5 lbs.-ft. |
| Full Load Torque | 1.5 ft.-lbs. |
| Hp | 1/2 hp |
| Hz | 60 Hz |
| Ins. Class | Class B |
| Insulation Class | Class B |
| Inverter Code | Not Inverter |
| Inverter Rated | No |
| Lead | 9#18 |
| Length Less Shaft | 13 1/8" |
| Line-line Res. @ 25° C | 27.56 ohms A Ph/0 ohms B Ph |
| Locked-rotor Torque | 5.8 lbs.-ft. |
| Max. Ambient Temp. | 40°C |
| Motor Application | General Application |
| Motor Bearings | Ball |
| Motor Design | 3-Phase |
| Motor Enclosure Design | Totally Enclosed Non Ventilated |
| Motor Frame Material | Steel |
| Motor Mounting Position | Vertical |
| Motor Mounting Type | Footless |
| Motor Service Factor | 1 |
| Motor Shaft Design | Standard |
| Motor Shaft Rotation | Counter Clockwise |
| Multiplier | K |
| Nameplate Rpm | 1725 RPM |
| Nema Design | B |
| Nema/iec | NEMA |
| No Load Amps | 0.54A |
| No. Of Motor Leads | 9 |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Nominal Efficiency | 75.5% |
| Overall Length | 14.98" |
| Part Winding Start Capable | No |
| Phase | 3 |
| Power Factor | 69 |
| Proprietary | No |
| Pull-up Torque | 4.6 lbs.-ft. |
| Pulley Face Code | C Face |
| Revision | Y |
| Rpm | 1700-1800 RPM |
| Rpm Range | 1701-1800 RPM |
| Service Factor | 1 |
| Shaft Dia. | 5/8" |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Length | 1 7/8" |
| Shaft Rotation | Reversible |
| Start Configuration | DOL |
| Starting Amps | 7A |
| Synchronous Rpm | 1800 RPM |
| Temp. Rise @ Rated Load | 57°C |
| Thermal Protection | None |
| Type | 3420M |
| Usable @ 208v | Yes |
| Voltage | 208-230/460V |
| Wire Size | 18 AWG |
Shipping Info:
| Ship weight (kg) | 13.5 |
| Ship height (cm) | 28.58 |
| Ship length (cm) | 47.31 |
| Ship width (cm) | 26.67 |
| HS code | 85015100 |
| Country of Origin | US |
Product Details:
Baldor VBM3538 short-series brake motor is employed on conveyors, machine tools, speed reducers, door operators and hoists requiring a quick stop. It provides braking as a safety measure when power cuts abruptly.
Features:
- Baldor VBM3538 general purpose brake motor is manufactured for quick stop & hold operations in hoists, conveyors, door operators, speed reducers, machine tools, rolling mills, cranes and textile / printing machinery.
- It features a totally enclosed non-ventilated (TENV) configuration for resistance against dirt and damp conditions and steel construction for withstanding tough job site abuse.
- This motor has ball bearings for decreasing rotational friction and supporting both radial and axial loads.
- It also offers automatic and manual thermal protection for eliminating overheating hazards.
Standards and Approvals:
- UR
- CSA
Frequently Asked Questions:
Q. What does C-face design refer to?
A. C-face is manufactured keeping installation in mind. They have a flat surface machined onto one side that permits for direct coupling with the equipment.
Q. What is the use of a shaft in a motor?
A. A shaft is a cylindrical component extruding out from the housing and motor. It transforms energy from the motor into end-use applications.
Product Variants
| Model | Voltage | Hp | Nameplate Rpm | Frame | Rpm Range | Motor Application | Brake Rating | Insulation Class | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| KBM3454 | 208-230/460V | 1/4 hp | 1725 RPM | 56C | - | - | - | Class B | €1,337.59 | |
| KBM3458 | 208-230/460V | 1/3 hp | 1725 RPM | 56C | - | - | - | Class B | €1,421.84 | |
| VBM3542 | 208-230/460V | 3/4 hp | 1725 RPM | 56C | - | - | - | Class B | €1,855.39 | |
| VBM3542-5 | 575V | 3/4 hp | 1750 RPM | 56C | - | - | - | Class F | €1,855.39 | |
| VEBM3546 | 208-230/460V | 1 hp | 1770 RPM | 56C | 1701-1800 RPM | Brake Motor | 6 lbs.-ft. | Class F | €3,313.14 | |
| VEBM3546T | 208-230/460V | 1 hp | 1760 RPM | 143TC | 1701-1800 RPM | - | - | Class F | €3,861.91 | |
| VEBM3554 | 208-230/460V | 1 1/2 hp | 1760 RPM | 56C | - | - | - | Class F | €2,564.41 |
Explore Products
- MAIN FILTER INC. MF0879310 890015MIC10NBR Interchange Hydraulic Filter, Cellulose, 10 Micron Rating, Viton Seal, 7.63 Inch Height
- VOLLRATH RT100-IN Retro Kit
- JET TOOLS JT9-60-25120 Abrasive, 25 Inch Size, 120 Grit
- HOFFMAN PKBC8R 13413 Keyboard Compartment, Fits 800mm Size, Light Gray, Steel
- REGAL 029073AS85 Hand Tap, M7 x 1 Size, D5 Limit, 4 Flutes, Plug, Metric, Left Hand With TiCN Coating
- ZEPHYR ZT733-C Drill Offset Attachment, Drill, Threaded Drill Bit, 3 1/4 Inch Overall Length
- STEARNS BRAKES 105644200DQF Brake, IP56 230/460VAC
- TSUBAKI H50B16F-1 Finished Bore Sprocket, 16 Teeth, 1 Inch Bore
Explore More
- CARLING TECHNOLOGIES
- DMT
- KERR LAKESIDE
- KEYSHAFT
- LYNDEX-NIKKEN
- Flexible Gas Connectors
- Towing Chains and Cables
- Post Hole Diggers
- Hazardous Location Enclosures
- Vertical Milling Machines
- DWYER INSTRUMENTS DH Series Digihelic Differential Pressure Controllers
- CONDOR Ergonomic Knee Supports
- ANSELL 59-001 VSB-8-HS Economic Arm Protection Sleeves
- REESE Ball Mount Drops
- BANJO FITTINGS Line Strainer
- ENERPAC FA Series Flange Alignment Tool Set
- MI-T-M Blow Guns
- VENCO PRODUCTS Clips
- MERIT BRASS 617B Barstock Solid Square Head Plugs
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VBM3538 Brake Motor, 208-230/460V, 1800 RPM, 60 Hz, 0.5 hp, 3 Phase TENV, 56C Frame
€2,139.15 /unit