BALDOR MOTOR EMM3710 IEC Motor, 1800 RPM, 60 Hz, 7.5 hp, 5.5kW, 3 Phase, TEFC, D132S Frame
Get it by Tuesday, Dec 23
€2,288.00 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | IEC Frame AC Motor |
| Ambient Temp. | 40°C |
| Amps @ 208v | 21A |
| Bearing-drive-end | 6208 |
| Bearing-opp-drive-end | 6206 |
| Design Code | A |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency | 91.7% |
| Efficiency @ 100% Load | 91.7% |
| Enclosure Design | TEFC |
| Enclosure-ingress-prot | 54 |
| Frame | D132S |
| Frame Size | D132S |
| Frequency | 60 Hz |
| Full Load Amps | 21-18.8/9.4A |
| Hp | 5 1/2 hp |
| Insulation Class | Class F |
| Kva Code | J |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Mounting Type | Rigid Base |
| Nameplate Rpm | 1770 RPM |
| No. Of Speeds | 1 |
| Output Hp | 5.5KW |
| Output Kw | 5.5 kW |
| Phase | 3 |
| Product Datasheet | baldor-motor-emm3710.pdf |
| Rpm | 1770 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Voltage | 230/460V |
Shipping Info:
| Ship weight (kg) | 58.5 |
| Ship height (cm) | 44.13 |
| Ship length (cm) | 66.99 |
| Ship width (cm) | 41.91 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - MM3710X
- KVA-Code: J
Documentation:
Product Variants
| Model | Voltage | Hp | Full Load Amps | Nameplate Rpm | Mounting Type | Frame | Output Kw | Rpm | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| EMM2333 | 208-230/460V | 11 hp | 38-36.2/18.1A | 1765 RPM | Rigid Base | D160M | 11 kW | 1700-1800 RPM | €3,722.14 | |
| EMM2334 | 208-230/460V | 15 hp | 52-50/25A | - | Rigid Base | D160L | 15 kW | 1700-1800 RPM | €4,519.21 | |
| EMM3554 | 230/460V | 1 1/10 hp | 4.5-4.4/2.2A | 1760 RPM | Rigid Base | D90S | 1.1 kW | 1760 RPM | €1,286.47 | |
| EMM3558 | 208-230/460V | 1 1/2 hp | 6-5.8/2.9A | 1755 RPM | - | D90L | 1.5 kW | 1700-1800 RPM | €1,312.04 | |
| EMM3559 | 230/460V | 11/5 hp | 7.9-7.2/3.6A | 3450 RPM | Rigid Base | D90S, L | 2.2 kW | 3450 RPM | €1,477.68 | |
| EMM3611 | 208-230/460V | 11/5 hp | 9-8.4/4.2A | 1760 RPM | - | D100L | 2.2 kW | 1700-1800 RPM | €1,472.95 | |
| EMM3613 | 208-230/460V | 37/10 hp | 12.4-11.2/5.6A | 3450 RPM | Foot Mounted | D100L | 3.7 kW | 3400-3600 RPM | €1,496.62 |
Explore Products
- CASH VALVE GT11335311 Piston, 1/4 Size
- QUANTUM STORAGE SYSTEMS FSB-20155BK Bussing TUB, 20 Inch W x 15 Inch D x 5 Inch H, Flat Bottom, Polypropylene, Black
- ADAPT-ALL 8075-04-04 Elbow, 90 deg., Female 0.25 BSPP x Female 0.25 BSPP, Brass
- REGAL 030064TC Spiral Flute Tap, #6-32 Size, H3 Limit, 2 Flutes, Semi-Btm., Bright
- VESTIL EHLTGT-5272-1-48 Electric Hydraulic Ground Lift Table, Tilt, 1000 Lb. Capacity, 52 x 72 Inch Size
- MAUDLIN PRODUCTS SKS-7-8 Key Stock, Square Keystock, Steel, 7/8 In Size, 12 In Lg., Zn Plated
- INGERSOLL-RAND 637371-3-A
- GRAINGER CPB053 Cap Nut, 3/8 In - 24 Thread Size, 1/2 In Overall Ht., 5/8 In Hex Wd., Not Gr., Right Hand, Fine
Explore More
- KEYSHAFT
- TRICO
- FAG BEARINGS
- SHARPEDGE TESTER
- MANCOMM
- PVC Pipe Fittings
- Concrete Trowels
- Stationary Air Tanks
- Wire Mesh Cloths
- Control Transformers
- SHARPE VALVES Carbon Steel Pneumatic Actuated Ball Valve
- REVCOR Blade Fan 20 Inch
- CONDOR High-Visibility Vest, Mesh Polyester, X Stripe Pattern, Single, Lime
- DESTACO 344 Series Pull Action Latch Clamps
- WRIGHT TOOL Extra Heavy Service Forged C Clamps
- SMC VALVES Mhs3 Series Gripper, 3-Finger
- AMERI-VENT Chimneys
- KM SYSTEMS Cutting Units
- AMETEK LAMB Discharge Vacuum Motors, 5.7 Frame Size, 36V, Tangential, 3 Stage
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EMM3710 IEC Motor, 1800 RPM, 60 Hz, 7.5 hp, 5.5kW, 3 Phase, TEFC, D132S Frame
€2,288.00 /unit