BALDOR MOTOR EM8003 Severe Duty Motor, 230/460V, 1800 RPM, 60 Hz, 1 hp, TEFC, 56 Frame
Get it by Tuesday, Dec 23
€1,507.67 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Hazardous Location Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 3.1A @ 208V, 3A @ 230V, 1.5A @ 460V |
| Amps @ Voltage | 1.5A @ 460V, 3A @ 230V, 3.1A @ 208V |
| Amps @ Volts | 3.1A @ 208V, 3A @ 230V, 1.5A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 13.5 lbs.-ft. |
| Conduit Box Position | F1 |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 85.5% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Enclosure Type | Totally Enclosed Fan Cooled |
| Feedback Device | NO FEEDBACK |
| Frame | 56 |
| Frame Material | Steel |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 1.5A |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Hazardous Location Class | None |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 1.5A |
| Hp | 1 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | L |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 18 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Rigid Base |
| Motor Type | 3520M |
| Mounting Type | Rigid Base |
| Nameplate Rpm | 1760 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output | 1 hp |
| Output @ Frequency | 1 hp @ 60 Hz |
| Overall Length | 12 1/4" |
| Phase | 3 |
| Power Factor | 71 |
| Product Family | Chemical Processing (Not Dc) |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rpm | 1760 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 17.1 |
| Ship height (cm) | 28.26 |
| Ship length (cm) | 41.91 |
| Ship width (cm) | 29.21 |
| HS code | 85015100 |
| Country of Origin | US |
Product Details:
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 85.50%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: L
- Lifting Lugs: No Lifting Lugs
- Locked Bearing Indicator: No Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 18 AWG
- No-Load Current: 0 A
- Product Family: Chemical Processing (not DC)
- Pull-Up Torque: 8.25 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 0.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 12.4 A
- Temp. Rise @ Rated Load: 36 deg C
- Temp. Rise @ S.F. Load: 42 deg C
Explore Products
- TB WOODS 500020M115 Synchronous Plus Belt Sprocket, Neoprene, 115mm Belt Width, 5000mm Pitch Length
- BALDOR / DODGE 272704 TXT505-T15,#15 T-A Seal Kit
- EDWARDS SIGNALING 5540MV-24Y6 Tone Generator, 120 250V
- BALDOR / DODGE 20Q04HA14 TIGEAR-2 Right Angle Reducer
- MAIN FILTER INC. MF0222182 P164225 Interchange Hydraulic Filter, Glass, 25 Micron Rating, Viton Seal, 13.07 Inch Height
- MILWAUKEE VALVE 84096- LL-940 Lever Assembly, For 3 Inch Valve Size
- BUSSMANN CB30110907 Barrier Terminal Block
- FABORY M04114.200.0030 Hex Head Cap Screw, M20x2.5 Thread Size, Steel, 30 mm Lg., 12.5 mm Head Ht.
Explore More
- KENNEDY
- KEYSHAFT
- HARRINGTON AWG
- ECOR PRO
- PULLMAN-HOLT
- Proximity Accessories
- Marking Tape Applicators
- Coalescing Filter Elements
- Pressing Tools
- Airline Cooling Systems
- AKRO-MILS 35180 Nest And Stack Totes
- CHICAGO PROTECTIVE APPAREL ARC Flash Jacket And Bib Kit, 12 Cal
- TURTLESKIN CP 350 Heat Resistant Gloves
- CONDOR Anti-Scratch Frameless Safety Glasses
- RIDGID Pipe Threading Machine, Single Phase, 115V
- DAYTON Steam Solenoid Valves Without Coils, Brass, 150 PSI
- QORPAK Glass Packer Bottle
- BALDWIN FILTERS Fuel or Hydraulic Elements
- KINDORF AB100 Series Channel Nut
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EM8003 Severe Duty Motor, 230/460V, 1800 RPM, 60 Hz, 1 hp, TEFC, 56 Frame
€1,507.67 /unit