BALDOR MOTOR EM3710T-9 Quarry Duty Motor, 230/460V, 1800 RPM, 7.5 hp, 3 Phase, TEFC, 213T Frame
Get it by Tuesday, Jul 7
€2,162.32 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 10.1A @ 460V, 20.2A @ 230V, 21.5A @ 208V , 21.5A @ 208V, 20.2A @ 230V, 10.1A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break Down Torque | 61.2 lbs.-ft. |
| Conduit Box Material | Steel |
| Conduit Box Position | F1 |
| Design Code | C |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 91.7% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 213T |
| Frame Material | Steel |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 21.5A @ 208V, 20.2A @ 230V, 10.1A @ 460V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 10.1A |
| Hp | 7 1/2 hp |
| Insulation Class | Class F |
| Inverter Code | Not Inverter |
| Kva Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 14 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Foot Mounted |
| Motor Type | 3744M |
| Mounting Type | Foot Mounted |
| Nameplate Speed | 1765 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output Frequency | 7 1/2 hp @ 60 Hz |
| Overall Length | 19.02" |
| Phase | 3 |
| Power Factor | 76 |
| Product Datasheet | baldor-motor-em3710t-9.pdf |
| Product Family | Wp Below Decks Marine Duty |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | Not Available |
| Service Factor | 1.15 |
| Shaft Dia. | 1 3/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 1700-1800 RPM , 1765 RPM |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Speed | 1800 RPM |
| Synchronous Speed @ Hz | 1800 RPM @ 60 Hz |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Winding Thermal 2 | None |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 63 |
| Ship height (cm) | 41.28 |
| Ship length (cm) | 67.63 |
| Ship width (cm) | 42.23 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - M3710T-9
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 91.70%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Not inverter
- KVA Code: H
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: No Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 14 AWG
- No-Load Current: 0 A
- Product Family: WP below decks Marine Duty
- Pull-Up Torque: 49.9 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.375 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 61.95 A
- Temp. Rise @ Rated Load: 62 deg C
- Temp. Rise @ S.F. Load: 76 deg C
Documentation:
Explore Products
- APPROVED VENDOR 1BUC5 Clevis Pin, Headless, 1/2 In Pin Dia., 2 In Usable Lg., 2 13/32 In Lg., Drilled Headless
- NIBCO CB03752 5104 Female Adapter, S x MPT, 2 1/2 Inch Size, CPVC, Light Grey
- ADAPT-ALL B1808H-20-20 Adapter, Malleable Iron, -20 Male BSPT x -20 Male BSPT
- GRAINGER SSCIA0-80012USA-100BX Socket Set Screw, 8-32 Thread Size, Blk Oxide, 1/8 In Lg., 5/64 In Drive Size, Cup
- HONEYWELL Q348U1009 Pilot Assembly, Intermittent Pilot Burner/Ignitor-Sensor, LP/NG
- APPROVED VENDOR PAT4420 Shoulder Screw, 8-32 Thread Size, 1/2 In Shoulder Lg., 5/32 In Head Ht., Gr. 18-8, Hex Socket
- GRAINGER PS-PC-ESD-22 Plastic Sheet, 0.25 Inch Plastic Thick, 24 Inch Width x 48 Inch Length, Clear
Explore More
- KEYSHAFT
- Horn Accessories
- Security Seals
- Clamping Kits
- Liquid Tight Cord Connectors
- Brake and Clutch Accessories
- MEMPHIS GLOVE Cut Pro Kevlar/Steel Shell Cut Resistant Work Gloves, 13 Gauge
- LOUISVILLE FE3200 Series Fiberglass Extension Ladders
- JOHN GUEST Fixed Elbows, NPTF Thread, Polypropylene Black
- COXREELS EZ-EN Series Spring Driven Hose Reels
- ALLPAX GASKET CUTTER SYSTEMS Top Shaft Rebuild Kits
- SQUARE D Limit / Interlock Switches
- ZSI-FOSTER Twin Series Beta Plates, Stainless Steel
- SIOUX CHIEF PowerPEX ASTM F2159 Couplings
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EM3710T-9 Quarry Duty Motor, 230/460V, 1800 RPM, 7.5 hp, 3 Phase, TEFC, 213T Frame
€2,162.32 /unit