BALDOR MOTOR ECP4124T-4 Severe Duty Motor, 460V, 900 RPM, 60 Hz, 2 hp, 3 Phase, TEFC, 326T Frame
Get it by Friday, Dec 19
€17,327.25 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Severe Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 37A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 340 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Constant Torque Speed Range | 6 |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 90.2% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 326T |
| Frame Material | Iron |
| Frame Size | 326T |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 37A |
| Full Load Torque | 0 lbs.-ft. |
| Full Load Torque | 0 ft.-lbs. |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 37A |
| Hp | 25 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Duty |
| Kva Code | F |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max. Rpm | 1325 RPM |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 3 @ 8 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Foot Mounted |
| Motor Type | 1256M |
| Mounting Type | Foot Mounted |
| Nameplate Rpm | 1325 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 8 |
| No. Of Speeds | 1 |
| Output @ Frequency | 25 hp @ 60 Hz |
| Overall Length | 30.66" |
| Phase | 3 |
| Power Factor | 67 |
| Product Datasheet | baldor-motor-ecp4124t-4.pdf |
| Product Family | Super-E Chemical Processing |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rpm | 880 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 2 1/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 900 RPM |
| Synchronous Rpm @ Frequency | 900 RPM @ 60 Hz |
| Type | 1256M |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 460V |
| Voltage @ Frequency | 460V @ 60 Hz |
| Xp Division | Division II |
| Xp Temp Code | T3 |
Shipping Info:
| Ship weight (kg) | 275.4 |
| Ship height (cm) | 54.93 |
| Ship length (cm) | 85.73 |
| Ship width (cm) | 65.25 |
| HS code | 85015230 |
| Country of Origin | US |
Product Details:
- Constant Torque Speed Range: 6
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 90.20%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter duty
- KVA Code: F
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 3 @ 8 AWG
- No-Load Current: 0 A
- Product Family: Super-E Chemical Processing
- Pull-Up Torque: 156 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 2.125 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 168 A
- Temp. Rise @ Rated Load: 62 deg C
- Temp. Rise @ S.F. Load: 73 deg C
Documentation:
Product Variants
| Model | Hp | Frame | Nameplate Rpm | Power Factor | Service Factor | Overall Length | Shaft Dia. | Type | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| ECP2276T | 7 1/2 hp | 254T | 1180 RPM | 71 | 1.15 | 24.78" | 1 5/8" | 0954M | €4,455.55 | |
| ECP2276T-4 | 7 1/2 hp | 254T | 1180 RPM | 71 | 1.15 | 24.78" | 1 5/8" | 0954M | €4,455.55 | |
| ECP2276T-5 | 7 1/2 hp | 254T | 1180 RPM | 71 | 1.15 | 24.78" | 1 5/8" | 0954M | €4,455.55 | |
| ECP2280T-4 | 5 hp | 254T | 880 RPM | 61 | 1.15 | 24.78" | 1 5/8" | 0952M | €6,836.08 | |
| ECP2294T | 15 hp | 254T | 5400 RPM | 87 | 1.15 | 24.78" | 1 5/8" | 0934M | €4,555.72 | |
| ECP2332T | 10 hp | 256T | 1180 RPM | 72 | 1.15 | 24.78" | 1 5/8" | 0960M | €5,788.64 | |
| ECP2332T-4 | 10 hp | 256T | 1180 RPM | 72 | 1.15 | 24.78" | 1 5/8" | 0960M | €5,788.64 |
Explore Products
- GATES 31325013
- APPROVED VENDOR 6GD21 Brass Ball Valve Fnpt x Mnpt 1/4 In
- MERIT BRASS X114-6432 Reducing Bushing, Nominal Size(a) 4 Inch, Nominal Size(b) 2 Inch
- ADAPT-ALL 5178L-28-28-16C Tee, Male L28 DIN Tube x Male L28 DIN Tube x Male 1 Inch ORB, Carb. Steel, Light Duty
- SDC PD2090ALCU Electric Bolt Lock, Electromagnetic Or Manual, Satin Aluminum, 1/8 Inch Width
- HUCO 727H38 Multi Beam Coupling, 6 Beam, Clamp Style, 38 Size
- SPEARS VALVES RCD-0500-T RCD-0500-T GR Drop Elbow, 90 Deg., SDR-11, 1/2 Inch Slip, CPVC
Explore More
- KEYSHAFT
- LABCONCO
- VITEK
- DUALVEE
- Single Phase Transformers
- Radial Ball Bearings
- Flared Tube Fittings
- Tire Valve Caps and Extensions
- Infrared Heater Elements
- TURTLESKIN CP-500 Insider Gloves
- PROTO Impact Socket, 1 Inch, Metric, Forged Alloy Steel
- CH HANSON Carpenter's Pencils
- EATON C Series Molded Case Switches, NG Frame
- 3M Abrasive Cut Off and Chop Wheels
- RULAND MANUFACTURING CPRD Series Controlflex Coupling Hubs, Double Insert, Regular Width, Inch
- DBI-SALA Delta Comfort Full-Body Harnesses
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR ECP4124T-4 Severe Duty Motor, 460V, 900 RPM, 60 Hz, 2 hp, 3 Phase, TEFC, 326T Frame
€17,327.25 /unit