BALDOR MOTOR EBM4104TY Three Phase Enclosed Motor, 230/460V, 1800 RPM, 30 hp, TEFC, 286TY Frame
Get it by Friday, Dec 19
€19,476.87 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 38A @ 460V, 76A @ 230V, 78A @ 208V |
| Amps @ Volts | 78A @ 208V, 76A @ 230V, 38A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 330 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 93.6% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 286T |
| Frame Material | Iron |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 78A @ 208V, 76A @ 230V, 38A @ 460V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 38A |
| Hp | 30 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | J |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 8 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | C Face Foot Mounted |
| Motor Type | 1056M |
| Mounting Type | C Face, Foot Mounted |
| Nameplate Rpm | 1760 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 30 hp @ 60 Hz |
| Overall Length | 39.13" |
| Phase | 3 |
| Power Factor | 80 |
| Product Datasheet | baldor-motor-ebm4104ty.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rpm | 1760 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 7/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 256.5 |
| Ship height (cm) | 54.93 |
| Ship length (cm) | 109.86 |
| Ship width (cm) | 66.04 |
| HS code | 85015230 |
| Country of Origin | US |
Product Details:
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 93.60%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: J
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 8 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 142 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.875 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 270 A
- Temp. Rise @ Rated Load: 64 deg C
- Temp. Rise @ S.F. Load: 76 deg C
Documentation:
Product Variants
| Model | Nameplate Rpm | Hp | Motor Type | Frame | Frame Material | Shaft Dia. | Overall Length | No. Of Poles | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| EBM2334TY | 1770 RPM | 20 hp | 0952M | 256T | Iron | 1 5/8" | 32.71" | 4 | €13,773.44 | |
| EBM2353TY | 1765 RPM | 15 hp | 0944M | 254T | Iron | 1 5/8" | 32.71" | 4 | €9,681.17 | |
| EBM2354TY | 1770 RPM | 20 hp | 0952M | 256T | Iron | 1 5/8" | 32.71" | 4 | €12,324.15 | |
| EBM3554TY | 1760 RPM | 1 1/2 hp | 3526M | 145T | Steel | 7/8" | 17.49" | 4 | €2,576.73 | |
| EBM3554Y | 1760 RPM | 1 1/2 hp | 3526M | 56 | Steel | 5/8" | 17.11" | 4 | €2,576.73 | |
| EBM3556TY | 1155 RPM | 1 hp | 3526M | 145T | Steel | 7/8" | 17.54" | 6 | €2,617.43 | |
| EBM3558TY | 1755 RPM | 2 hp | 3528M | 145T | Steel | 7/8" | 17.54" | 4 | €2,651.51 |
Explore Products
- VULCAN HART 00-857836-00002 Burner, Compartment, Left Hand
- E JAMES & CO 5313-1/8HGYTAPE Rubber Buna-nitrile 1/8 Inch Thick 4 x 36 Inch
- GRAINGER 14784_24_0 Stainless Steel Round Tube 304, 1 1/2 Inch Dia, 24 Inch Length, 0.049 Inch Wall Thick
- APPLETON ELECTRIC KPCL2575R235Z2 Light Fixture, 250W
- SMC VALVES MGPL25-20Z Compact Cylinder, 25 mm Size, Ball Bearing
- WATTS 111-125 1/2 0915527
- WORLDWIDE ELECTRIC PEWWE50-36-326JM Close Coupled Motor, TEFC, 50 HP, 3600 RPM, 326JM Frame, C Face with Feet
- SPEARS VALVES 801-828F Reducer Tee, Socket, Schedule 80, Fabricated, 20 x 18 Size, PVC
Explore More
- FANTECH
- FUNCTIONAL DEVICES INC / RIB
- HARRIS
- KEYSHAFT
- MILLER - WELDCRAFT
- Equipment and Safety Labels
- Scullery Sinks
- Machine Skates And Rollers Equipment
- 3.3 Inch Diameter Motors
- Pipe Grabs
- PLAST-O-MATIC CARD Series Air Release Valves
- WESTWARD Fiberglass Extension Ladders, 300 Lbs.
- RUD CHAIN VCGH-G Bolt On Excavator Hooks
- ANVIL 2809 Series Threaded Lateral Anvilets, 3000 PSI
- VERMONT GAGE Go/NoGo Standard Thread Plug Gages, 2 1/4-8 Un
- GROVE GEAR EL Series, WHMQ-H1 Style, 826 Size, Aluminium Worm Gear Reducers
- CASH VALVE Plug Assemblies
- AMERICAN TORCH TIP Oxweld Tip Nuts, 1808 Style
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EBM4104TY Three Phase Enclosed Motor, 230/460V, 1800 RPM, 30 hp, TEFC, 286TY Frame
€19,476.87 /unit