BALDOR MOTOR CM2333T-58 Three Phase Enclosed Motor, 1500 RPM, 50 Hz, 15 hp, TEFC, 254TC Frame
Get it by Tuesday, Dec 23
€4,072.39 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Volts | 22A @ 380V, 22.5A @ 415V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 207 lbs.-ft. |
| Conduit Box Position | F1 |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 90.2% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 254TC |
| Frame Material | Iron |
| Frame Size | 254TC |
| Frequency | 50.00 Hz |
| Frequency | 50 Hz |
| Front Face Code | Standard |
| Full Load Amps | 22A @ 380V, 22.5A @ 415V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 22A |
| Hp | 15 hp |
| Insulation Class | Class F |
| Inverter Code | Not Inverter |
| Kva Code | J |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 6 @ 12 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Type | 0760M |
| Mounting Type | C Face, Foot Mounted |
| Nameplate Rpm | 1460 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 15 hp @ 50 Hz |
| Overall Length | 23.32" |
| Phase | 3 |
| Power Factor | 82 |
| Product Datasheet | baldor-motor-cm2333t-58.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C Face |
| Pulley Shaft Indicator | Standard |
| Rpm | 1460 RPM |
| Service Factor | 1 |
| Shaft Dia. | 1 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Delta Run, Wye Start |
| Starting Method | Wye Start-Delta Run |
| Synchronous Rpm @ Frequency | 1500 RPM @ 50 Hz |
| Synchronous Speed | 1500 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 380/415V |
| Voltage @ Frequency | 380V @ 50 Hz, 415V @ 50 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 106.2 |
| Ship height (cm) | 44.77 |
| Ship length (cm) | 72.71 |
| Ship width (cm) | 46.04 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 90.20%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Not inverter
- KVA Code: J
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 6 @ 12 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 86.4 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 165 A
- Temp. Rise @ Rated Load: 79 deg C
Documentation:
Product Variants
| Product | Model | Voltage | Nameplate Rpm | Hp | Frequency | Motor Type | Service Factor | Full Load Amps | Frame | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
CEM4400TS | 230/460V | 1785 RPM | 100 hp | 60 Hz | A40064M | 1.15 | 224A @ 230V, 112A @ 460V | 405TSC | €22,133.12 | |
|
CM3545X | 230/460V | 3450 RPM | 1 hp | 60 Hz | 3416M | 1.25 | - | 56C | €643.94 | |
 |
M4406TX-4E | 460V | 1785 RPM | 150 hp | 60 Hz | A44062M | 1.15 | 170A | 445T | €22,695.12 |
Explore Products
- PROTO J505/16S2 Starter Punch S2 1/8 x 5-1/8 In
- INGERSOLL-RAND Y240-1 U Cup Packing
- WINTERS INSTRUMENTS DPG213 Gauge, 2.5 Inch, Dial, 0/60 Psi, Abs Case, Rubber Boot, 1/4 Inch, Npt Lm
- HUB CITY 0270-09092 Worm Reducer, 5.323 Hp, 1.188 Inch I.D, 1.125 Inch O.D, Stainless Steel
- SMC VALVES SYA3240-01T Valve, 1/8 Inch Base Mount
- BRADY B30C-500-569-BK 117932 Continuous Label Roll, 1/2 Inch X 100 Ft, Low Halide Polyester, Black, Outdoor
- WINSMITH E24MSFS32200BT Speed Reducer, 143-145TC/182-184C Motor Frame, Hollow Bore
- CLEVELAND C95032 0 Thread Mill, Carbide, TiAlN, 4 Flute, 7/16-14 Thread Size, 0.3400 Inch Size Cutter Dia
Explore More
- ACORN
- ANSELL
- CABLE PREP
- KEYSHAFT
- SMC VALVES
- Job and Shop Ticket Holders
- Laboratory Heating Mantles
- Tapping Tools
- Shopping Carts
- Bolt Clamps
- SHARPE VALVES Forged 316L Stainless Steel Gate Valve, Socket Weld
- HELICOIL Straight Flute Bottoming Taps, UNC
- LUMAPRO Miniature Incandescent Bulbs, G4 1/2 Lamp Shape
- GLOBE SCIENTIFIC Wash Bottles, Wide Mouth, LDPE, 500 ml Capacity
- APPROVED VENDOR Elbow, 45 Degrees, Stainless Steel
- SGS PRO Double Cut Carbide Bur, Cylinder With Radius Shape
- APPLETON ELECTRIC Receptacle, With Circuit Breaker
- HOFFMAN Weatherflo Series Enclosure Bases
- STARRETT-UK Dual Cut Wood Cutting Jig Saw Blades, Bi-Metal Unique
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR CM2333T-58 Three Phase Enclosed Motor, 1500 RPM, 50 Hz, 15 hp, TEFC, 254TC Frame
€4,072.39 /unit