FREE delivery on orders over €150
APPROVED VENDOR H138CR Drill Bushing Type H Drill Size 2.3mm
Item: AA2QHAModel: H138CRCross Ref: 10Y865
7 In Stock
Ships within 2 days via
10.00% off
€21.08 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Drill Bushing |
| Bushing Code | HM |
| Bushing Head Type | Headed |
| Bushing Type | Head Press Fit |
| Concentricity Tolerance | 0.0003" |
| Decimal Equivalent | 0.0906 |
| Drill Bushing Wall Type | Standard Wall |
| Drill Size | 2.3 mm |
| Finish | Steel |
| Head Dia. | 19/64" |
| Head Material | High Speed Steel |
| Head Type | Yes |
| Heat Treatment | Through Hardened |
| Inside Dia. Tolerance | +0.0001" to +0.0004" |
| Material | Steel |
| Material - Machining | High Speed Steel |
| Measurement System | Metric |
| Outside Dia. | 13/64" |
| Outside Dia. Tolerance | 0.0012" to 0.0015" |
| Overall Length | 1/2" |
| Rockwell Hardness | RC 62-64 |
Shipping Info:
| Ship height (cm) | 1.51 |
| Ship length (cm) | 0.24 |
| Ship width (cm) | 0.24 |
| HS code | 8207907585 |
| Country of Origin | GB |
Product Variants
| Model | Inside Dia. | Drill Size | Bushing Code | Drill Bushing Wall Type | Decimal Equivalent | Inside Dia. Tolerance | Outside Dia. Tolerance | Outside Dia. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| H1012AC | 1/64" | 1/64" | H | Standard Wall | 0.0156 | +0.0002" to +0.0006" | 0.0012" to 0.0015" | 5/32" | €105.47 | |
| H1012AH | 0.023" | #74 | - | - | - | - | - | 0.156" | €105.47 | |
| H1012AM | #69 | #69 | H | Standard Wall | 0.0292 | +0.0002" to +0.0006" | 0.0012" to 0.0015" | 5/32" | €85.48 | |
| H1012AN | #68 | #68 | H | Standard Wall | 0.031 | +0.0002" to +0.0006" | 0.0012" to 0.0015" | 5/32" | €70.70 | |
| H1012AO | 1/32" | 1/32" | H | Standard Wall | 0.0312 | +0.0003" to +0.0007" | 0.0012" to 0.0015" | 5/32" | €70.70 | |
| H1012AP | #67 | - | H | Standard Wall | 0.032 | +0.0001" to +0.0005" | 0.0012" to 0.0015" | 5/32" | €70.70 | |
| H1012AR | #65 | - | H | Standard Wall | 0.035 | +0.0002" to +0.0006" | 0.0012" to 0.0015" | 5/32" | €70.70 |
Explore Products
- AEROQUIP FS65000-1616-01 Swivel Joint, 1 Inch, 11 1/2 Male NPSM inlet, 1 Inch, 11 1/2 Female NPTF Outlet
- KRUEGER HS1GG-2-42 Therma Level Gauge, 2 Inch NPT Opening, 42 Inch Depth, Solid Glass Calibration
- ZURN P886-E4-NS No-Hub End Outlet With Screw
- EATON CB1633B120480KGR5 Pringle Bolted Pressure Contact Switch, 1600A, 120V, 480V, Three-Wire, 3-Pole, 1No-1Nc
- DORIAN CNMG-432-KER-DKC10UT
- SCOTSMAN 03-3804-01 Catch - Screw
- PROTO JSCVM19B Combination Wrench, 19 mm Head Size, 11 Inch Length, Full Polish Chrome, Alloy Steel
- MARTIN SPROCKET SPBP-31 Shear Pin Bushing, 22.50 Inch Outer Diameter, 12.9375 In Length
Popular Search Queries
- Approved-vendor Ms16555-629
- Approved-vendor Nas1352n08-10
- Approved-vendor Ms15795-806
- Approved-vendor Ms16555-640
- Approved-vendor Ms15795-805
- Approved-vendor Ms16555-617
- Approved-vendor Ms16555-622
- Approved-vendor Ms16555-641
- Approved-vendor Ms15795-803
- Approved-vendor Ms16555-602
- Approved-vendor Ms16555-625
Explore More
- CROWN BOILER CO.
- KEYSHAFT
- LEVITON
- VERMONT GAGE
- Disc Backup Pads
- Thumb Nuts
- Hand Held Punches
- Floor Boxes
- Liquid Storage Tank Accessories
- CHICAGO PNEUMATIC Industrial Maintenance Air Hammers
- JOHN GUEST Union Elbows, Polypropylene Black
- ANVIL AS926 Series Strut Braces
- ANVIL 2809 Series Threaded Lateral Anvilets, 3000 PSI
- ZURN Elongated, Floor with Back Outlet
- EATON 2080 Series Cross Adapters
- MANITOWOC Water Regulating Valves
- SMITH BEARING Smith-Trax FCR Series Bearings, Flanged Stud Type
- GASTEC Gas Detection Tubes
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
APPROVED VENDOR H138CR Drill Bushing Type H Drill Size 2.3mm
€23.42 /unit