ALLPAX GASKET CUTTER SYSTEMS AX4010 Gasket Cutter Kit, Medium Duty, No Cut Board, 1 to 13 Inch Cut Range, 3/4 Inch Max. Thickness

Uses:

Where can we use the Allpax AX4010 gasket cutter kit?

This easy to operate Allpax AX4010 gasket cutter kit is fast & simple to set up. It can be used to effectively cut a variety of gasket and sealing materials including:

• Cork gasket sheet.
• Rubber sheet (both straight rubber and reinforced grades).
• Engineering and industrial felt.
• Compressed non-asbestos fibre (CNAF) gasket materials.
• Graphite gasket sheet (except those with steel reinforcement).
• Soft PTFE and plastic sealing sheet.

Allpax AX4010 comes with both standard duty and heavy duty cutting blades. The standard duty blades are great for rubber, sponge and corks. The heavy duty blades can be used to cut compressed, non asbestos fibre materials.

Features:

• AX4010 gasket cutter kit is designed for cutting non-rigid or non-metallic gasket materials.
• Allpax AX4010 gasket cutter can be used with a variety of materials including cork, rubber, fibre, sponge and more.
• This AX4010 gasket cutter kit includes an aluminium cutting block, steel-extension bars, standard and heavy-duty blades and a dual metric / imperial cutting indicator.
• The dual metric / imperial cutting indicator features a secure, comfortable grip with easy-to-read, engraved scales that assure precision cuts.
• AX4010 gasket cutter kit comes in a plastic case, making it easy for the user to carry in the field.

Standards and Approvals:

• Allpax AX4010 gasket cutter kit meets OSHA standards to ensure a safe and hazard-free work environment. The brand also passes a Factory Acceptance Test for food retorting processes.

Installation:

Allpax AX4010 gasket cutter kit contains factory assembled tools that require no installation and are ready for use. An operator needs a piece of paper or cardboard and a pencil for marking on the paper or gasket material.

Frequently Asked Questions:

Q. What is the use of the Allpax AX4010 gasket cutter?

A. Allpax AX4010 gasket cutters are used for cutting gaskets and circular joints accurately in various materials, such as leather, rubber, plastic, PTFE and vulcanised fibre having thicknesses up to 8 mm.

Q. Does Raptor Supplies offer similar gasket cutter kits of different gasket cutting capacities?

A. Yes, Raptor Supplies also offers Allpax AX4020 gasket cutter kits and Allpax AX4030 gasket cutter kits available in a cutting diameter of 1 and 37 inches, respectively.

Q. How do Allpax rotary-style gasket cutters work?

A. Rotary-style gasket cutters come with a stationary frame and a crank-powered set of rotating cutting discs. To operate, first set the scale bar to the required outer diameter (OD) and create a small hole in the centre of the gasket material to be cut. Then open the cutter, insert the material onto a scale bar spindle and fasten using the knurled nut. Using one hand, lower the cutting disc & apply pressure, while turning the crank with the other hand. Now remove excess material, adjust the scale bar to the desired inner diameter (ID) and make another circular cut around that circumference. Finally, remove the finished flange gasket.

Q. How to use Allpax extension-style gasket cutters?

A. Allpax extension-style gasket cutters have a cutter block with modular extension bars and an adaptable cutting blade. First, create a small hole in the centre of the gasket material to be cut. Now lay out the gasket material flat on the cutting board, put the central pin through the hole and insert it into a ferrule in the board. Set the blade to the desired depth of cut. Now loosen the knurled nut so that the blade can be adjusted to the desired outside diameter (OD). Add / remove extensions if required. Position the extension tail onto the pin. While holding the pin with one hand, grip the block with the other hand and apply downward pressure by sweeping a circular pattern around the circumference of the gasket material. Now, remove excess material and adjust the cutter to the desired inner diameter (ID) and make another circular cut around that circumference. Finally, remove the finished flange gasket.