AIR SYSTEMS INTERNATIONAL BB50-CO4R Breather Box, With CO Monitor, 50 CFM, 79 CFM, 4 Independent Regulator, 4 Coupling

Air Systems BB50-CO4R filters incoming air from the compressor to supply respirators with Grade D quality air and monitors the carbon monoxide level present in the air.

Features:

• 3 stage filtration with auto / manual drain ideal for serving up to 4 people with 99.99% efficiency at 0.01 micron.
• Independent regulators to allow different respirators and lengths of hoses to be used simultaneously.
• Should be used in the upright and closed position to prevent internal contamination.
• Standard carbon monoxide (CO) airline monitor operating on disposable 9V batteries
• External audible alarm and light to signal the workers of high CO content.
• Remote alarm jack included.
• Point-of-Attachment (POA) boxes for extending respirator usage beyond 300 ft.

Standards and Approvals:

• OSHA 1910.134
• BS-EN 12021:1999

Frequently Asked Questions:

Q. How to calibrate CO monitor?

A.

• Install the CO calibration gas cylinder regulator.
• Turn the regulator's knob counterclockwise to allow gas to flow through the hose. Check the flow of gas through the hose using touch or sound.
• Connect the plug to the monitor's air sample inlet.
• Allow 15-30 seconds for the digital readout to stabilise.
• Adjust the "span" adjustment screw (clockwise to increase or counterclockwise to decrease) until the digital readout matches the concentration (ppm) printed on gas cylinder calibration.
• Turn off the regulator and go through the "zero" adjustment procedure again. The digital readout should return to "00".