Onboard Raptor as a vendor
Email

WALTER TOOLS F2330 High Feed Face Milling Cutter


Walter F2330 high feed face milling cutters can be used for roughing, finishing, contouring and high-speed machining operations, making them a popular choice in manufacturing applications. They can remove material quickly, creating high-quality finishes and precise shapes.

Filter
WALTER TOOLS F2330.T18.020.Z02.01A
WALTER TOOLS F2330.B.066.Z06.01 5B
WALTER TOOLS F2330.B.052.Z05.01 5C
WALTER TOOLS F2330.B22.50.Z04.01 5D
StyleModelCutting LengthInsert Cutting Edge LengthDia.No. Of Inserts RequiredNomenclatureMax. Cutting Dia.No. Of InsertsIso NumberPrice
A
F2330.T18.020.Z02.01		0.039"1 mm0.394"2F2330.T18.020.Z02.0120 mm2F2330.T18.020.Z02.01€659.17
A
F2330.UT18.019.Z02.01		0.039"1 mm0.356"2F2330.UT18.019.Z02.013/4"2F2330.UT18.019.Z02.01€659.17
A
F2330.Z20.020.Z02.01		0.039"1 mm0.591"3F2330.Z20.020.Z02.0120 mm2F2330.Z20.020.Z02.01€689.76
A
F2330.UW31.038.Z03.01 5		0.039"1.5 mm0.356"2F2330.UW31.038.Z03.01, 51 1/2"3F2330.UW31.038.Z03.01,5€797.75
A
F2330.UZ15.019.Z02.01		0.039"1 mm0.606"3F2330.UZ15.019.Z02.013/4"2F2330.UZ15.019.Z02.01€685.02
A
F2330.UW15.019.Z02.01		0.039"1 mm0.606"3F2330.UW15.019.Z02.013/4"2F2330.UW15.019.Z02.01€689.76
A
F2330.T22.025.Z03.01		0.039"1 mm0.591"3F2330.T22.025.Z03.0125 mm3F2330.T22.025.Z03.01€685.28
A
F2330.UT22.026.Z03.01		0.039"1 mm0.606"3F2330.UT22.026.Z03.011"3F2330.UT22.026.Z03.01€685.28
A
F2330.Z25.025.Z03.01		0.059"-0.709"3F2330.Z25.025.Z03.010.984"--€717.79
A
F2330.UT28.031.Z03.01.5		0.059"1.5 mm0.699"3F2330.UT28.031.Z03.01.51 1/4"3F2330.UT28.031.Z03.01.5€717.27
A
F2330.T28.032.Z03.01 5		0.059"1.5 mm0.709"3F2330.T28.032.Z03.01, 532 mm3F2330.T28.032.Z03.01,5€723.29
A
F2330.UZ26.031.Z03.01 5		0.059"1.5 mm0.949"3F2330.UZ26.031.Z03.01, 51 1/4"3F2330.UZ26.031.Z03.01,5€752.27
A
F2330.UW26.031.Z03.01 5		0.059"1.5 mm0.949"3F2330.UW26.031.Z03.01, 51 1/4"3F2330.UW26.031.Z03.01,5€752.27
B
F2330.B.066.Z06.01 5		0.059"1.5 mm1.496"5F2330.B.066.Z06.01, 566 mm6F2330.B.066.Z06.01,5€1,166.96
A
F2330.T36.042.Z03.01 5		0.059"-1.102"3F2330.T36.042.Z03.01, 5---€760.84
B
F2330.B22.63.Z05.01 5		0.059"-2.598"6F2330.B22.63.Z05.01, 563 mm5F2330.B22.063.Z05.01,5€1,116.47
A
F2330.UT36.038.Z03.01.5		0.059"1.5 mm0.949"3F2330.UT36.038.Z03.01.51 1/2"3F2330.UT36.038.Z03.01.5€760.84
A
F2330.T28.035.Z03.01 5		0.059"1.5 mm0.827"3F2330.T28.035.Z03.01, 535 mm3F2330.T28.035.Z03.01,5€723.29
A
F2330.T36.040.Z03.01 5		0.059"1.5 mm1.024"3F2330.T36.040.Z03.01, 540 mm3F2330.T36.040.Z03.01,5€760.84
A
F2330.UZ19.026.Z03.01		0.059"1 mm0.699"3F2330.UZ19.026.Z03.011"3F2330.UZ19.026.Z03.01€787.68
A
F2330.UW19.026.Z03.01		0.059"1 mm0.699"3F2330.UW19.026.Z03.011"3F2330.UW19.026.Z03.01€712.61
B
F2330.B.085.Z07.01 5		0.059"-2.047"6F2330.B.085.Z07.01, 5---€1,421.01
B
F2330.B22.063.Z04.02		0.079"2 mm2.362"5F2330.B22.063.Z04.0263 mm4F2330.B22.063.Z04.02-
RFQ
B
F2330.UZ31.038.Z03.01 5		0.079"-3.213"6F2330.UZ31.038.Z03.01, 51"3F2330.UZ31.038.Z03.01,5€814.18
C
F2330.B.052.Z05.01 5		0.197"1.5 mm2.087"7F2330.B.052.Z05.01, 552 mm5F2330.B.052.Z05.01,5€956.75
D
F2330.B22.50.Z04.01 5		0.315"-0.709"2F2330.B22.50.Z04.01, 550 mm4F2330.B22.050.Z04.01,5€913.28
D
F2330.Z32.032.Z03.01 5		0.461"-3/4"2F2330.Z32.032.Z03.01, 50.709"3F2330.Z32.032.Z03.01,5€773.32

Working Mechanism

  • The face milling cutter is mounted onto the milling machine spindle and secured in place.
  • The workpiece is clamped onto the machine table and the cutter is positioned above it.
  • The cutter is then rotated at high speed, depending on the material being machined.
  • The cutter is then fed into the workpiece with the cutting teeth making contact with the surface.
  • The depth of cut and feed rate is adjusted to control the material removal rate and achieve the desired surface finish.
  • The chips are removed from the cutting area using a coolant or compressed air to prevent damage to the cutter and improve the cutting performance.
  • The workpiece can then be further processed or finished, depending on the specific requirements of the application.

Features

  • Walter F2330 face milling cutters come with a carbide cutting edge to provide high durability and speed.
  • They feature three cutting edges per indexable insert for improved surface finish, tool life, efficiency and productivity.
  • They have an insert holding by the screw / hexagon socket head cap screw for easy installation.
  • These Walter F2330 milling cutters are available in an overall length of 10 inches and the cable provides cutting maximum diameters up to 1.5 inches.

Frequently Asked Questions

How do I maintain these face milling cutters?

  • Keep cutters clean and use proper coolant.
  • Inspect regularly for damage or wear and replace worn or damaged inserts promptly.
  • Store cutters properly in a clean and dry environment.
  • Use the correct type and grade of inserts for the specific application.
  • Tighten bolts and screws to the correct specifications.
  • Sharpen or regrind teeth as needed.

What are the factors to consider when selecting a face milling cutter?

  • Material being machined requires a cutter with more wear resistance.
  • Consider machining operation and cutting conditions of operation (roughing, finishing), cutting speed and depth of cut.
  • Surface finish requires cutters with higher numbers of teeth.
  • Consider factors, such as cutter diameter, width, cutting speed and feed rate.

We are here to help!

Looking for a part not listed here?

Chat with us now

Popular Search Queries

Explore More