SPEEDAIRE Electric Air Compressors, Horizontal

Electric Air Compressors, Horizontal

Speedaire air compressors units are manufactured to offer compressed air to power pneumatic tools and control spray guns. These ASME approved air compressors come with oil lubricated pumps and should be mounted on a hard floor or ground. Choose from a range of these air compressors available in 135 and 150 PSI pressure options.

Working Mechanism

• Choose a clean, well-ventilated location having enough clearance between the compressor flywheel & walls to install the unit.
• Mount the tank over the concrete floor or isolation pads to reduce vibrations.
• Connect the motor to a grounded electrical connection.
• After the power is switched On & the motor starts up, the connected flywheel starts rotating to start up the compressor.
• The compressor's cylinder crankshafts & pistons start moving up & down to intake air.
• The pressurised gas is sent to the air cylinder / tank for further applications. An appropriate filter should be installed to receive air free from water or oil.
• The unit is controlled using an automatic start & stop pressure switch that stops the compressor once a preset receiver tank pressure is reached. When the receiver tank pressure goes below a preset minimum level, the pressure switch restarts the compressor again.