DAYTON Wire Rope Clips


Filter
StyleModelFinishMaterialMin. Number of ClipsMin. TorqueRope Turn BackWire Rope Dia.Price (ex. VAT)
A
2VKJ2
------€2.28
A
2VKJ7
------€6.50
B
2VKJ5
GalvanizedMaleable Iron365 ft.-lb.7"7/16"€3.68
B
2VKJ8
GalvanizedMaleable Iron495 ft.-lb.12"5/8"€6.72
B
2VKJ1
GalvanizedMaleable Iron37-1/2 ft.-lb.3.75"3/16"€1.46
B
2VKK2
GalvanizedMaleable Iron6225 ft.-lb.26"1"€16.03
B
2VKJ9
GalvanizedMaleable Iron5130 ft.-lb.18"3/4"€9.54
B
2VKJ4
GalvanizedMaleable Iron345 ft.-lb.6.5"3/8"€6.89
B
2VKH9
GalvanizedMaleable Iron34-1/2 ft.-lb.3.25"1/8"€1.25
B
2VKK1
GalvanizedMaleable Iron5225 ft.-lb.20"7/8"€13.49
B
2VKJ3
GalvanizedMaleable Iron330 ft.-lb.5.25"5/16"€2.36
B
2VKJ6
GalvanizedMaleable Iron465 ft.-lb.11.5"1/2"€4.96
C
2VKH7
Natural304 Stainless Steel345 ft.-lb.6.5"3/8"€20.25
C
2VKH3
Natural304 Stainless Steel315 ft.-lb.4.75"1/4"€10.97
C
2VKG6
Natural304 Stainless Steel34-1/2 ft.-lb.3.25"1/8"€6.54
C
2VKH1
Natural304 Stainless Steel37-1/2 ft.-lb.3.75"3/16"€8.06
C
2VKH5
Natural304 Stainless Steel330 ft.-lb.5.25"5/16"€16.71

Wire Rope Clips

Dayton wire rope clips create a load bearing eye at the end of a wire rope / cable to help secure the ends when turning back to form a loop. These steel / iron clips can accommodate uncoated ropes with diameters ranging between 1/8 & 7/8 inches. They feature a U-shaped bolt, double saddle & 2 nuts to allow full-arch wrench swing for quick installation, retightening and to prevent kinking effect. Choose from a wide range of these wire rope clips available in minimum torque rates ranging from 4-1/2 to 130 ft-lb.

We are here to help!

Looking for a part not listed here?