Wire Rope Clips

Dayton wire rope clip and thimble sets are ideal for securing wire rope ends when turning them back to form loops in construction, maintenance, commercial and industrial applications. They feature 2 / 3 U-bolt clips and 1 thimble for protecting wire ropes from abrasions and kinks. These sets are constructed of galvanised steel or stainless steel with bright / natural finish for corrosion resistance and durability. Choose from a wide range of these sets for fitting wire ropes of diameters ranging from 1/8 to 1/2 inches.

Dayton wire rope clips create a load bearing eye at the end of a wire rope / cable to help secure the ends when turning back to form a loop. These steel / iron clips can accommodate uncoated ropes with diameters ranging between 1/8 & 7/8 inches. They feature a U-shaped bolt, double saddle & 2 nuts to allow full-arch wrench swing for quick installation, retightening and to prevent kinking effect. Choose from a wide range of these wire rope clips available in minimum torque rates ranging from 4-1/2 to 130 ft-lb.

Crosby wire rope clips are designed for securing wire rope ends by turningbackwards to form a loop; ideal for overhead lifting and terminating a crane's hook. TheseASME B30.26 compliant clips feature steel construction to offer torque ratings ranging from 4.5 to 360 ft-lb and a galvanised finish for resistance against corrosion and rust. They have a maximum efficiency rating of 80% for 1/8 inch through 7/8 inch wire rope sizes and 90% for wire rope size of 1 inch through 3-1/2 inches. Choose from a wide range of these wire rope clips available in a set including 2 to 8 clips, on Raptor Supplies.