How to install a jaw coupling hub?

Users can install jaw coupling hubs by following these steps: The customers should first buy a spider according to the selected hub (preferably from the same corresponding series) having the same specifications & parameters. After purchase, they should ensure that each component is free from contaminants, defects or cracks and match the shaft diameter to the bore size of the hubs. Before starting the coupling installation, users should ensure that the machinery is disconnected from all power sources. They should also not install it on unstable or moving equipment. The hubs having key slots should be fitted with the keys and slid fit into shafts for preventing slipping during shaft rotation. The keyless hubs can be attached directly to shafts using set screws. The users should insert a spider into a hub while ensuring that the spider opening is large enough to fit both the shaft & the optional key. Selected jaw coupling hubs can be overhung slightly or be moved back on the shafts for adjusting according to misalignments in shaft separation. Then, the second hub is brought near the first hub while keeping the guidelines in mind, such as the gap between hub faces. Users should check the set screw tightness & alignment before testing to prevent possible misalignment. Now the coupling is ready for operation, users should remove any material or tool away from the shaft and coupler. The equipment is ready to start up and test.

What is the difference between rigid and flexible jaw coupling?

Rigid couplings offer a rigid connection between two shafts that are firmly connected. They transfer torque smoothly throughout the system. These rigid couplings can't handle misalignment and shocks. Flexible couplings like jaw coupling hubs provide flexible connections and hence, can withstand shocks & misalignment up to a certain extent. However, there is a chance of some losses during torque transfer while using flexible jaw coupling.

What are some common mistakes the users make while selecting a jaw coupling hub?

Some common mistakes users make while selecting jaw coupling hubs are: Failing to check maximum bore capacity: Users should always check the shaft size of the driving equipment before purchasing a jaw coupling. Using same size couplings everywhere: Using the one-size-fits-all approach may seem like a good idea to prevent downtime. But an oversized or undersized jaw coupling may cause malfunctioning in motors and failed couplings. Ignoring heat and chemical compatibility: Since the jaw couplings require purchasing of both hubs and spiders, the customers should take note that both the coupling hub & spider materials are compatible with the required environments. Overlooking space restrictions: Users should make sure that the selected couplings according to required torque applications can fit the provided space. High torque applications require either a large diameter coupling to handle high torque or coupling with different designs & high torque density.

How to choose the right jaw coupling hub?

Customers can choose the right jaw coupling hubs for their needs according to the following points:Determining the usage.Choosing the material considering the intended application environment.Selecting the coupling on the basis of torque, speed, bore size and other factors.Jaw coupling hub types are based on usage and their ability to handle the degree of movement or rotation. For example, curved jaw coupling hubs (Lovejoy CJ Series) transfer high torque and can handle some degree of rotation (backlash) due to their curved jaw design.

What is the difference between keyway and keyless jaw coupling hubs?

Selected models of jaw coupling hubs feature a cutout slot in the mating part (hub) of the couplings, known as keyways. These slots or keyways fit in the keys or a separate mechanical attachment on the shafts or other mated tools. The use of "Keys" leads to improved torque & prevents slipping. It also results in reduced losses due to vibrations & backlash (degree of free movement between two rotating, mating parts).However, some applications do not require keys, as keyless jaw coupling hubs use only set screw holding power to transfer torque. Keyless hubs are ideal for applications that cause no damages or injuries even if the shafts slip. Keyed jaw coupling hubs concentrate the stresses around the key or key slot, causing maintenance issues and efficiency losses. Keyless hubs distribute the load & hence require less maintenance.

Jaw Coupling Hubs

Filter

Jaw couplings are flexible couplings that connect two shafts at their ends to transmit power. They consist of jaw coupling hubs and spiders for handling diverse temperature ranges, speed of...Read more

HYDRO VACUUM -

Flexible Jaw Couplings

Style	Model	Diameter	Price
A	EZ1 L/D=40/24	-	€69.89	RFQ
A	EZ9 L/D=140/60	-	€265.52	RFQ
A	EZ7 L/D=140/60	-	€226.40	RFQ
A	EZ7 L/D=110/48	-	€163.28	RFQ
A	EZ1 L/D=28/14	14"	€66.35	RFQ
A	EZ1 L/D=40/19	19"	€69.89	RFQ
A	EZ3 L/D=40/19	19"	€81.62	RFQ
A	EZ7 L/D=40/24	24"	€115.98	RFQ
A	EZ7 L/D=50/24	24"	€121.70	RFQ
A	EZ1 L/D=50/24	24"	€71.12	RFQ
A	EZ3 L/D=50/24	24"	€83.65	RFQ
A	EZ3 L/D=40/24	24"	€81.62	RFQ
A	EZ3 L/D=44/25	25"	€82.44	RFQ
A	EZ7 L/D=44/25	25"	€120.58	RFQ
A	EZ3 L/D=60/28	28"	€88.36	RFQ
A	EZ1 L/D=60/28	28"	€73.41	RFQ
A	EZ3 L/D=50/28	28"	€83.65	RFQ
A	EZ7 L/D=50/28	28"	€121.70	RFQ
A	EZ7 L/D=60/28	28"	€130.93	RFQ
A	EZ1 L/D=50/28	28"	€71.12	RFQ
A	EZ9 L/D=60/28	28"	€142.38	RFQ
A	EZ1 L/D=80/32	32"	€86.60	RFQ
A	EZ9 L/D=80/32	32"	€154.24	RFQ
A	EZ1 L/D=50/32	32"	€72.88	RFQ
A	EZ7 L/D=50/32	32"	€127.71	RFQ

HYDRO VACUUM -

Coupling Hubs

Style	Model	Diameter	Price
A	EZ1 D=54	54"	€41.38	RFQ
A	EZ3 D=82	82"	€44.03	RFQ
A	EZ7 D=107	107"	€48.84	RFQ
A	EZ9 D=127	127"	€55.11	RFQ
A	EZ10 D=180	180"	€80.73	RFQ

MARTIN SPROCKET -

Super Series Jaw Couplings

Style	Model	Coupling Size	Outside Dia.	Keyway Size	Length Through Bore	Type	Material	Price
A	MS050 1/2	050	1.063"	-	5/8"	Finished	Steel	€5.76
A	MS050 7/16	050	1.063"	-	5/8"	Finished	Steel	€5.76
B	MS050 3/8	050	1.063"	-	5/8"	Reborable Bore	Steel	€5.76
C	MS050 5/16	050	1.063"	-	5/8"	Reborable Bore	Steel	€5.76
D	MS050 9/16	050	1.062"	-	5/8"	Finished	Steel	€5.76
B	MS050 1/4	050	1.063"	-	5/8"	Reborable	Steel	€5.76
D	MS050 5/8	050	1.063"	-	5/8"	Bored to Size	Steel	€5.76
B	MS070 3/8	070	1 3/8"	-	3/4"	Reborable Straight Jaw	Steel	€9.52
B	MS070 5/16	070	1 3/8"	-	3/4"	Reborable	Steel	€9.52
A	MS070 7/16	070	1 3/8"	-	3/4"	Bored to Size	Steel	€9.52
D	MS070 9/16	070	1 3/8"	1/8" x 1/16"	3/4"	Finished	Steel	€9.52
D	MS070 11/16	070	1 3/8"	3/16" x 3/32"	3/4"	Finished	Steel	€9.52
E	MS070BLK 1/4	070	1 3/8"	-	3/4"	Reborable Bore	Steel	€9.52
A	MS070 1/2	070	1 3/8"	-	3/4"	Finished Straight Jaw	Steel	€9.52
D	MS070 5/8	070	1 3/8"	-	3/4"	Bored to Size	Steel	€9.52
D	MS070 3/4	070	1 3/8"	3/16" x 3/32"	3/4"	Finished Straight Jaw	Steel	€9.52
B	MS070 1/4	070	1 3/8"	-	3/4"	Reborable Straight Jaw	Steel	€9.52
D	MS075 13/16	075	1 3/4"	3/16" x 3/32"	13/16"	Finished	Steel	€11.50
D	MS075 7/8	075	1 3/4"	-	0.813"	Bored to Size	Steel	€11.50
B	MS075 3/8	075	1 3/4"	-	13/16"	Reborable Straight Jaw	Steel	€11.50
D	MS075 5/8	075	1 3/4"	-	0.813"	Bored to Size	Steel	€11.50
D	MS075 9/16	075	1 3/4"	1/8" x 1/16"	13/16"	Finished Straight Jaw	Steel	€11.50
B	MS075 1/4	075	1 3/4"	-	13/16"	Reborable Bore	Steel	€11.50
D	MS075 3/4	075	1 3/4"	-	0.813"	Bored to Size	Steel	€11.50
B	MS075 5/16	075	1 3/4"	-	0.813"	Reborable	Steel	€11.50

LOVEJOY -

L Type Hubs With Keyway, Metric Bores

Style	Model	Hub Material	Max. Speed	Outside Dia.	Keyway Size	Coupling Size	Number Of Jaws	Nominal Torque	Elastomeric Member	Price
A	68514444720	-	5000 RPM	95.25 mm	6 mm x 2.8 mm	-	3	140 N-m	Buna N	€83.80
A	68514444832	-	9000 RPM	53.59 mm	4 mm x 1.8 mm	-	3	21.9 N-m	Buna N	€30.22
A	68514449605	Cast Iron	4200 RPM	127 mm	-	-	3	264 N-m	Buna N	€178.69
A	68514445609	Cast Iron	1800 RPM	156.97 mm	-	-	3	533 N-m	Buna N	€378.43
A	68514441885	Cast Iron	1800 RPM	156.97 mm	10 mm x 3.3 mm	-	3	533 N-m	Buna N	€378.43
A	68514458268	Cast Iron	1800 RPM	156.97 mm	-	-	3	533 N-m	Buna N	€378.43
A	68514456236	Cast Iron	1800 RPM	156.97 mm	18 mm x 4.4 mm	-	3	533 N-m	Buna N	€378.43
A	68514447492	Cast Iron	4200 RPM	127 mm	-	-	3	264 N-m	Buna N	€175.16
A	68514441849	Cast Iron	4200 RPM	127 mm	10 mm x 3.3 mm	-	3	264 N-m	Buna N	€187.67
A	68514450102	Cast Iron	1800 RPM	156.97 mm	18 mm x 4.4 mm	-	3	533 N-m	Buna N	€378.43
A	68514450292	Cast Iron	1800 RPM	156.97 mm	14 mm x 3.8 mm	-	3	533 N-m	Buna N	€378.43
A	68514445062	Cast Iron	1800 RPM	156.97 mm	14 mm x 3.8 mm	-	3	533 N-m	Buna N	€378.43
A	68514444598	Cast Iron	4200 RPM	127 mm	18 mm x 4.4 mm	-	3	264 N-m	Buna N	€187.67
A	68514444089	Cast Iron	4200 RPM	127 mm	16 mm x 4.3 mm	-	3	264 N-m	Buna N	€178.69
A	68514448797	Cast Iron	4200 RPM	127 mm	14 mm x 3.8 mm	-	3	264 N-m	Buna N	€233.59
A	68514447569	Cast Iron	4200 RPM	127 mm	14 mm x 3.8 mm	-	3	264 N-m	Buna N	€233.59
A	68514452674	Cast Iron	4200 RPM	127 mm	14 mm x 3.8 mm	-	3	264 N-m	Buna N	€178.69
A	68514448982	Cast Iron	4200 RPM	127 mm	8 mm x 3.3 mm	-	3	264 N-m	Buna N	€187.67
A	68514449664	Cast Iron	4200 RPM	127 mm	10 mm x 3.3 mm	-	3	264 N-m	Buna N	€187.67
A	68514452197	Cast Iron	4200 RPM	127 mm	10 mm x 3.3 mm	-	3	264 N-m	Buna N	€187.67
A	68514452961	Cast Iron	1800 RPM	156.97 mm	10 mm x 3.3 mm	-	3	533 N-m	Buna N	€336.75
A	68514456067	Cast Iron	1800 RPM	156.97 mm	16 mm x 4.3 mm	-	3	533 N-m	Buna N	€397.42
A	68514456544	Cast Iron	4200 RPM	127 mm	18 mm x 4.4 mm	-	3	264 N-m	Buna N	€178.69
A	68514459308	Cast Iron	1800 RPM	156.97 mm	-	-	3	533 N-m	Buna N	€336.75
A	68514461202	Cast Iron	1800 RPM	156.97 mm	14 mm x 3.8 mm	-	3	533 N-m	Buna N	€336.75

LOVEJOY -

L Type Hubs With Keyway, Inch Bores

Style	Model	Hub Material	Max. Speed	Outside Dia.	Keyway Size	Coupling Size	Number Of Jaws	Set Screw Style Coupling Location Size	Hub Type	Price
A	68514412428	Cast Iron	4200 RPM	5"	1/4" x 1/8"	-	3	1"	2	€187.67
A	68514412435	Cast Iron	4200 RPM	5"	0.375" x 0.188"	-	3	1"	2	€187.67
A	68514437263	Cast Iron	4200 RPM	5"	0.188" x 0.094"	-	3	1"	2	€154.96	RFQ
A	68514460057	Cast Iron	1800 RPM	6.18"	0.375" x 0.188"	-	3	1 14/25"	2	€336.75	RFQ
A	68514412602	Cast Iron	1800 RPM	6.18"	0.625" x 0.312"	-	3	1 14/25"	2	€397.42
A	68514412441	Cast Iron	4200 RPM	5"	-	-	3	1"	2	€187.67
A	68514426091	Cast Iron	4200 RPM	5"	1/2" x 1/4"	-	3	1"	2	€178.69
A	68514412436	Cast Iron	4200 RPM	5"	0.375" x 0.188"	-	3	1"	2	€187.67
A	68514476518	Cast Iron	4200 RPM	5"	0.312" x 0.156"	-	3	1"	2	€154.96
A	68514476591	Cast Iron	1800 RPM	6.18"	1/2" x 1/4"	-	3	1 14/25"	2	€415.14
A	68514476592	Cast Iron	1800 RPM	6.18"	3/4" x 3/8"	-	3	1 14/25"	2	€397.42
A	68514412586	Cast Iron	1800 RPM	6.18"	1/4" x 1/8"	-	3	1 14/25"	2	€397.42
A	68514412598	Cast Iron	1800 RPM	6.18"	1/2" x 1/4"	-	3	1 14/25"	2	€397.42
A	68514412607	Cast Iron	1800 RPM	6.18"	3/4" x 3/8"	-	3	1 14/25"	2	€397.42
A	68514426092	Cast Iron	4200 RPM	5"	1/2" x 1/4"	-	3	1"	2	€187.67
A	68514412438	Cast Iron	4200 RPM	5"	1/2" x 1/4"	-	3	1"	2	€187.67
A	68514412434	Cast Iron	4200 RPM	5"	-	-	3	1"	2	€187.67
A	68514437276	Cast Iron	4200 RPM	5"	0.438" x 0.219"	-	3	1"	2	€187.67
A	68514412440	Cast Iron	4200 RPM	5"	1/2" x 1/4"	-	3	1"	2	€187.67
A	68514448250	Cast Iron	1800 RPM	6.18"	0.438" x 0.219"	-	3	1 14/25"	2	€397.42
A	68514412585	Cast Iron	1800 RPM	6.18"	0.188" x 0.094"	-	3	1 14/25"	2	€392.47
A	68514412439	Cast Iron	4200 RPM	5"	-	-	3	1"	2	€177.21
A	68514435754	Cast Iron	4200 RPM	5"	0.312" x 0.156"	-	3	1"	2	€187.67
A	68514437268	Cast Iron	4200 RPM	5"	0.375" x 0.188"	-	3	1"	2	€187.67
A	68514412432	Cast Iron	4200 RPM	5"	0.375" x 0.188"	-	3	1"	2	€187.67

LOVEJOY -

AL Type Hubs With Keyway, Inch Bores

Style	Model	Keyway Size	Max. Speed	Number Of Jaws	Set Screw Style Coupling Location Size	Hub Type	Nominal Torque	Max. Bore	Dimension Hd	Price
A	68514418052	1/2" x 1/4"	5000 RPM	3	0.63"	2	1240 lbs.-in.	1 7/8"	3.19"	€85.42
A	68514418053	1/2" x 1/4"	5000 RPM	3	0.63"	2	1240 lbs.-in.	1 7/8"	3.19"	€133.21
A	68514417927	1/4" x 1/8"	7000 RPM	3	11/25"	1	417 lbs.-in.	1 3/8"	2.53"	€79.60
A	68514417924	1/4" x 1/8"	7000 RPM	3	11/25"	1	417 lbs.-in.	1 3/8"	2.53"	€79.60
A	68514417887	1/4" x 1/8"	7000 RPM	3	11/25"	2	318 lbs.-in.	1.187"	2.06"	€50.68
A	68514417984	1/4" x 1/8"	5000 RPM	3	3/4"	1	792 lbs.-in.	1 5/8"	3.31"	€102.41
A	68514418042	1/4" x 1/8"	5000 RPM	3	0.63"	2	1240 lbs.-in.	1 7/8"	3.19"	€90.81
A	68514417886	1/4" x 1/8"	7000 RPM	3	11/25"	2	318 lbs.-in.	1.187"	2.06"	€68.04
A	68514417982	1/4" x 1/8"	5000 RPM	3	3/4"	1	792 lbs.-in.	1 5/8"	3.31"	€102.41
A	68514417981	1/4" x 1/8"	5000 RPM	3	3/4"	1	792 lbs.-in.	1 5/8"	3.31"	€102.41
A	68514417983	1/4" x 1/8"	5000 RPM	3	3/4"	1	792 lbs.-in.	-	3.31"	€102.41
A	68514417928	1/4" x 1/8"	7000 RPM	3	11/25"	1	417 lbs.-in.	1 3/8"	2.53"	€79.60
A	68514418039	1/4" x 1/8"	5000 RPM	3	0.63"	2	1240 lbs.-in.	1 7/8"	3.19"	€133.21
A	68514417926	1/4" x 1/8"	7000 RPM	3	11/25"	1	417 lbs.-in.	1 3/8"	2.53"	€79.60
A	68514417857	1/4" x 1/8"	9000 RPM	3	11/25"	1	194 lbs.-in.	1 1/8"	2 3/25"	€26.09
A	68514418043	1/4" x 1/8"	5000 RPM	3	0.63"	2	1240 lbs.-in.	1 7/8"	3.19"	€133.21
A	68514417923	1/4" x 1/8"	7000 RPM	3	11/25"	1	417 lbs.-in.	1 3/8"	2.53"	€79.60
A	68514418040	1/4" x 1/8"	5000 RPM	3	0.63"	2	1240 lbs.-in.	1 7/8"	3.19"	€133.21
A	68514418041	1/4" x 1/8"	5000 RPM	3	0.63"	2	1240 lbs.-in.	1 7/8"	3.19"	€133.21
A	68514417890	1/4" x 1/8"	7000 RPM	3	11/25"	2	318 lbs.-in.	1.187"	2.06"	€51.47
A	68514417889	1/4" x 1/8"	7000 RPM	3	11/25"	2	318 lbs.-in.	1.187"	2.06"	€50.68
A	68514426094	1/4" x 1/8"	5000 RPM	3	3/4"	1	792 lbs.-in.	1 5/8"	3.31"	€102.41
A	68514417856	1/4" x 1/8"	9000 RPM	3	11/25"	1	194 lbs.-in.	1 1/8"	2 3/25"	€38.16
A	68514417858	1/4" x 1/8"	9000 RPM	3	11/25"	1	194 lbs.-in.	1 1/8"	2 3/25"	€39.34
A	68514476519	1/8"	9000 RPM	3	0.34"	2	144 lbs.-in.	7/8"	-	€54.25

LOVEJOY -

L Type Hubs, Special Short And Long Hubs

Style	Model	Keyway Size	Length Through Bore	Keyway	Hub Length	Outside Dia.	Hub Material	Max. Speed	Rated Power At 100 Rpm	Price
A	68514441610	1/8"	0.31"	Keyway	4/5"	1 2/25"	Sintered Iron	18000 RPM	21/500 hp	€9.81
A	68514410357	No Keyway	22/25"	Without Keyway	1.35"	1 2/25"	Sintered Iron	18000 RPM	21/500 hp	€170.80
A	68514410338	No Keyway	0.31"	Without Keyway	4/5"	1 2/25"	Sintered Iron	18000 RPM	21/500 hp	€9.81
A	68514410359	No Keyway	22/25"	Without Keyway	1.35"	1 2/25"	Sintered Iron	18000 RPM	21/500 hp	€223.04
A	68514410335	No Keyway	0.31"	Without Keyway	4/5"	1 2/25"	Sintered Iron	18000 RPM	21/500 hp	€9.81
A	68514410337	No Keyway	0.31"	Without Keyway	4/5"	1 2/25"	Sintered Iron	18000 RPM	21/500 hp	€9.81
A	68514410360	No Keyway	22/25"	Without Keyway	1.35"	1 2/25"	Sintered Iron	18000 RPM	21/500 hp	€223.04
A	68514410362	No Keyway	22/25"	Without Keyway	1.35"	1 2/25"	Sintered Iron	18000 RPM	21/500 hp	€223.04

LOVEJOY -

L Type Hubs, Splines And Special Bores

Style	Model	Hub Material	Outside Dia.	Keyway Size	Min. Bore	Set Screw Style Coupling Location Size	Length Through Bore	Keyway	Hub Length	Price
A	68514437940	Cast Iron	5"	-	3/4"	1"	2.18"	Without Keyway	3.18"	€1,330.85
A	68514437938	Cast Iron	5"	-	3/4"	1"	2.18"	Without Keyway	3.18"	€1,332.25
A	68514437935	Cast Iron	5"	-	3/4"	1"	2.18"	Without Keyway	3.18"	€1,332.25
A	68514437937	Cast Iron	5"	-	3/4"	1"	2.18"	Without Keyway	3.18"	€1,335.08
A	68514437936	Cast Iron	5"	-	3/4"	1"	2.18"	Without Keyway	3.18"	€1,332.25
A	68514437939	Cast Iron	5"	-	3/4"	1"	2.18"	Without Keyway	3.18"	€1,332.25
A	68514438577	Cast Iron	6.18"	-	7/8"	1 14/25"	3 3/25"	Without Keyway	4.7"	€641.21
A	68514438579	Cast Iron	6.18"	-	7/8"	1 14/25"	3 3/25"	Without Keyway	4.7"	€623.14
A	68514438578	Cast Iron	6.18"	-	7/8"	1 14/25"	3 3/25"	Without Keyway	4.7"	€617.76
A	68514438576	Cast Iron	6.18"	-	7/8"	1 14/25"	3 3/25"	Without Keyway	4.7"	€641.21
A	68514438568	Sintered Iron	2.11"	-	1/4"	11/25"	0.82"	Without Keyway	13/25"	€130.24
A	68514438570	Sintered Iron	2.11"	-	1/4"	11/25"	0.82"	Without Keyway	1.34"	€130.24
A	68514438573	Sintered Iron	2.54"	-	0.437"	11/25"	1.06"	Without Keyway	1.77"	€170.42
A	68514437919	Sintered Iron	3 3/4"	-	5/8"	3/4"	1 3/4"	Without Keyway	2 3/4"	€231.80
A	68514437900	Sintered Iron	-	-	0.437"	11/25"	1"	Without Keyway	1.34"	€140.39
A	68514437902	Sintered Iron	2.11"	-	0.437"	11/25"	1"	Without Keyway	1.34"	€158.40
A	68514438572	Sintered Iron	2.54"	-	0.437"	11/25"	1.06"	Without Keyway	1.77"	€162.31
A	68514437930	Sintered Iron	4 1/2"	-	3/4"	22/25"	1.94"	-	2.94"	€337.88
A	68514438574	Sintered Iron	2.54"	-	0.437"	11/25"	1.06"	Without Keyway	1.77"	€170.42
A	68514437928	Sintered Iron	4 1/2"	-	3/4"	22/25"	1.94"	Without Keyway	2.94"	€337.88
A	68514437927	Sintered Iron	4 1/2"	-	3/4"	22/25"	1.94"	Without Keyway	2.94"	€337.88
A	68514437910	Sintered Iron	3 8/25"	-	5/8"	3/4"	1 17/25"	Without Keyway	2 14/25"	€199.74
A	68514437933	Sintered Iron	4 1/2"	-	3/4"	22/25"	1.94"	Without Keyway	2.94"	€337.88
A	68514437901	Sintered Iron	2.11"	-	0.437"	11/25"	1"	Without Keyway	1.34"	€140.39
A	68514437914	Sintered Iron	3 8/25"	-	5/8"	3/4"	1 17/25"	Without Keyway	2 14/25"	€209.74

LOVEJOY -

GS Series Aluminum Hubs, Inch Bores

Style	Model	Outside Dia.	Overall Coupling Length	Max. Speed	Coupling Size	Max. Bore	Dimension G	Dimension Hd	Distance Between Spider And Hub Face (dimension Cl)	Price
A	68514476514	1.57"	2 3/5"	9550 RPM	-	0.938"	0.63"	1.57"	2/25"	€299.83
B	68514476318	1.57"	2 3/5"	9550 RPM	GS19/24B	0.938"	0.63"	1.57"	2/25"	-	RFQ
B	68514476513	1.57"	2 3/5"	9550 RPM	GS19/24B	0.938"	0.63"	1.57"	2/25"	€299.83
B	68514476523	1.57"	2 3/5"	9550 RPM	GS19/24B	0.938"	0.63"	1.57"	2/25"	€299.83
B	68514476175	2 14/25"	3.54"	5850 RPM	GS28/38B	1 1/2"	0.79"	2 14/25"	0.1"	-	RFQ
B	68514476538	3.15"	4.49"	4750 RPM	GS38/45B	1 3/4"	0.94"	3.15"	3/25"	€466.43
B	68514476539	3.15"	4.49"	4750 RPM	-	1 3/4"	0.94"	3.15"	3/25"	€466.43

LOVEJOY -

H Type Coupling Hubs, Rough Stock Bore

Style	Model	Coupling Size	Outside Dia.	Max. Speed	Nominal Torque	Hub Length	Elastomeric Member	Dimension Hd	Volume	Price
A	68514448070	H3067	10"	2300 RPM	33396 lbs.-in.	6.87"	SOX Rubber	7"	687 cu. in.	€2,963.82
B	68514450883	H3567	110"	2100 RPM	46632 lbs.-in.	7.38"	Sox Nitrile Butadiene Rubber	7 3/4"	892.98 cu. in.	€4,437.11
B	68514447878	H3667	120"	1900 RPM	64812 lbs.-in.	8 1/4"	Sox Nitrile Butadiene Rubber	8 3/4"	1188000 cu. in.	-	RFQ
B	68514455473	H4067	13 1/4"	1800 RPM	88224 lbs.-in.	9.13"	Sox Nitrile Butadiene Rubber	9 3/4"	1602.88563 cu. in.	€6,466.79
B	68514455477	H4567	14 1/2"	1500 RPM	119700 lbs.-in.	10 3/25"	Sox Nitrile Butadiene Rubber	10 3/4"	2127.73 cu. in.	€7,513.48

RULAND MANUFACTURING -

JCC Series Jaw Coupling With Keyways

Style	Model	Keyway Size	Outside Dia.	Coupling Size	Bore Dia.	Overall Coupling Length	Bore Tolerance	Hub Material Grade	Length Through Bore	Price
A	JCC36-11-A	-	-	-	-	-	-0" to +0.001"	-	-	€415.05	RFQ
B	JCC44-22-A	0.312" x 0.125"	2 3/4"	JC44	1 3/8"	1.297"	-	2024	-	€312.94
C	JCC36-20-A	1/4" x 1/8"	2 1/4"	Jc36	1 1/4"	-	0" to 0.002"	Grade 2024	1.1"	€274.14
D	JCC36-16-A	1/4" x 1/8"	2 1/4"	Jc36	1"	-	0" to 0.002"	Grade 2024 T351	1.1"	€280.07
B	JCC50-16-A	1/4" x 1/8"	3 1/8"	JC50	1"	1.594"	0" to 0.001"	2024	1 3/5"	€359.89
B	JCC50-18-A	1/4" x 1/8"	3 1/8"	JC50	1 1/8"	1.594"	0" to 0.001"	2024	1 3/5"	€359.89
B	JCC50-20-A	1/4" x 1/8"	3 1/8"	JC50	1 1/4"	1.594"	0" to 0.001"	2024	1 3/5"	€359.89
C	JCC32-16-A	1/4" x 1/8"	2"	JC32	1"	-	0" to 0.002"	Grade 2024	4/5"	€212.71
B	JCC44-18-A	1/4" x 1/8"	2 3/4"	JC44	-	1.297"	0" to 0.001"	2024	1.3"	€312.94
B	JCC44-20-A	1/4" x 1/8"	2 3/4"	JC44	1 1/4"	1.297"	0" to 0.001"	2024	1.3"	€312.94
B	JCC44-16-A	1/4" x 1/8"	2 3/4"	JC44	1"	1.297"	0" to 0.001"	2024	1.3"	€312.94
D	JCC36-18-A	1/4" x 1/8"	2 1/4"	Jc36	1 1/8"	-	0" to 0.002"	Grade 2024 T351	1.1"	€278.42
D	JCC26-8-A	1/8" x 1/16"	1 5/8"	Jc26	1/2"	-	0" to 0.002"	Grade 2024 T351	0.7"	€129.36
C	JCC32-8-A	1/8" x 1/16"	2"	JC32	1/2"	-	0" to 0.002"	Grade 2024	4/5"	€199.82
D	JCC36-8-A	1/8" x 1/16"	2 1/4"	Jc36	1/2"	-	0" to 0.002"	Grade 2024 T351	1.1"	€275.43
E	JCC21-8-A	1/8" x 1/16"	0.312"	Jc21	1/2"	-	0" to 0.002"	Grade 2024	3/5"	€107.22
F	JCC16-8-A	1/8" x 1/16"	1"	Jc16	1/2"	-	0" to 0.002"	Grade 2024 T351	1/2"	€74.24
B	JCC50-26-A	3/8" x 3/16"	3 1/8"	JC50	1 5/8"	1.594"	0" to 0.001"	2024	1 3/5"	€359.89
B	JCC50-28-A	3/8" x 3/16"	3 1/8"	JC50	1 3/4"	1.594"	0" to 0.001"	2024	1 3/5"	€359.89
B	JCC44-24-A	3/8" x 3/16"	2 3/4"	JC44	1 1/2"	1.297"	0" to 0.001"	2024	1.3"	€312.94
B	JCC50-24-A	3/8" x 3/16"	3 1/8"	JC50	1 1/2"	1.594"	0" to 0.001"	2024	1 3/5"	€359.89
C	JCC32-12-A	3/16" x 3/32"	2"	JC32	3/4"	-	0" to 0.002"	Grade 2024	4/5"	€199.82
C	JCC32-10-A	3/16" x 3/32"	2"	JC32	5/8"	-	0" to 0.002"	Grade 2024	4/5"	€204.33
D	JCC36-14-A	3/16" x 3/32"	2 1/4"	Jc36	7/8"	-	0" to 0.002"	Grade 2024 T351	1.1"	€263.08
D	JCC36-12-A	3/16" x 3/32"	2 1/4"	Jc36	3/4"	-	0" to 0.002"	Grade 2024 T351	1.1"	€280.07

MARTIN SPROCKET -

Universal Series Jaw Couplings

Style	Model	Coupling Size	Outside Dia.	Keyway Size	Length Through Bore	Type	Material	Price
A	ML035 1/4	035	5/8"	-	0.266"	Reborable	Steel	€3.78
A	ML035 1/8	035	5/8"	-	17/64"	Reborable Straight Jaw	Steel	€3.78
B	ML035 5/16	035	5/8"	-	17/64"	Reborable Straight Jaw	Steel	€3.78
A	ML035 3/8	035	5/8"	-	0.266"	Reborable	Steel	€3.78
A	ML050 5/16	050	1.062"	-	5/8"	Reborable	Steel	€5.76
C	ML050 1/2	050	1.062"	-	5/8"	Bored to Size	Steel	€5.76
C	ML050 5/8	050	1.062"	-	5/8"	Bored to Size	Steel	€5.76
C	ML050 7/16	050	1.062"	-	5/8"	Bored to Size	Steel	€5.76
C	ML050 9/16	050	1.062"	-	5/8"	Bored to Size	Steel	€5.76
A	ML050 1/4	050	1.062"	-	5/8"	Reborable	Steel	€5.76
A	ML050 3/8	050	1.062"	-	5/8"	Reborable	Steel	€5.76
D	ML070 9/16	070	1 3/8"	-	3/4"	Bored to Size	Steel	€9.52
D	ML070 11/16	070	1 3/8"	3/16" x 3/32"	3/4"	Finished Straight Jaw	Steel	€9.52
D	ML070 5/8	070	1 3/8"	-	3/4"	Bored to Size	Steel	€9.52
A	ML070 3/8	070	1 3/8"	-	3/4"	Reborable	Steel	€9.52
A	ML070 5/16	070	1 3/8"	-	3/4"	Reborable	Steel	€9.52
C	ML070 7/16	070	1 3/8"	-	3/4"	Bored to Size	Steel	€9.52
E	ML070BLK 1/4	070	1 3/8"	-	3/4"	Reborable Bore	Steel	€9.52
A	ML070 1/4	070	1 3/8"	-	3/4"	Reborable	Steel	€9.52
D	ML070 3/4	070	1 3/8"	-	3/4"	Bored to Size	Steel	€9.52
C	ML070 1/2	070	1 3/8"	-	3/4"	Bored to Size	Steel	€9.52
A	ML075 5/16	075	1 3/4"	-	13/16"	Reborable Straight Jaw	Steel	€11.50
F	ML075 11/16	075	1 3/4"	3/16" x 3/32"	13/16"	Finished Straight Jaw	Steel	€11.50
D	ML075 7/8	075	1 3/4"	-	0.813"	Bored to Size	Steel	€11.50
G	ML075BLK 1/4	075	1 3/4"	-	13/16"	Reborable Bore	Steel	€11.50

LOVEJOY -

AL Type Hubs With Keyway, Metric Bores

Style	Model	Outside Dia.	Keyway Size	Max. Speed	Number Of Jaws	Length Through Bore	Nominal Torque	Hub Length	Moment Of Inertia (solid) Wr2	Price
A	68514462906	34.54 mm	5 mm x 2.3 mm	14000 RPM	2	19.05 mm	4.88 N-m	31.75 mm	0.04 lbs.-sq. in.	€14.80
A	68514465698	34.54 mm	6 mm x 2.8 mm	14000 RPM	2	19.05 mm	4.88 N-m	31.75 mm	0.04 lbs.-sq. in.	€14.80
A	68514456487	34.54 mm	4 mm x 1.8 mm	14000 RPM	2	19.05 mm	4.88 N-m	31.75 mm	0.04 lbs.-sq. in.	€15.54
A	68514465696	34.54 mm	5 mm x 2.3 mm	14000 RPM	2	19.05 mm	4.88 N-m	31.75 mm	0.04 lbs.-sq. in.	€22.66
A	68514465694	34.54 mm	4 mm x 1.8 mm	14000 RPM	2	19.05 mm	4.88 N-m	31.75 mm	0.04 lbs.-sq. in.	€15.54
A	68514451098	38.86 mm	4 mm x 1.8 mm	11000 RPM	3	20.57 mm	10.17 N-m	33.27 mm	0.121 lbs.-sq. in.	€16.17
A	68514460887	38.86 mm	5 mm x 2.3 mm	9000 RPM	3	23.11 mm	16.27 N-m	36.32 mm	0.271 lbs.-sq. in.	€26.00
A	68514464655	38.86 mm	4 mm x 1.8 mm	11000 RPM	3	20.57 mm	10.17 N-m	33.27 mm	0.121 lbs.-sq. in.	€16.17
A	68514458620	38.86 mm	4 mm x 1.8 mm	9000 RPM	3	23.11 mm	16.27 N-m	36.32 mm	0.271 lbs.-sq. in.	€26.00
A	68514441924	38.86 mm	3 mm x 1.4 mm	11000 RPM	3	20.57 mm	10.17 N-m	31.75 mm	0.121 lbs.-sq. in.	€16.97
A	68514447302	38.86 mm	5 mm x 2.3 mm	11000 RPM	3	20.57 mm	10.17 N-m	33.27 mm	0.121 lbs.-sq. in.	€16.97
A	68514460429	38.86 mm	4 mm x 1.8 mm	9000 RPM	3	23.11 mm	16.27 N-m	36.32 mm	0.271 lbs.-sq. in.	€26.00
A	68514456514	38.86 mm	3 mm x 1.4 mm	9000 RPM	3	23.11 mm	16.27 N-m	36.32 mm	0.271 lbs.-sq. in.	€17.23
A	68514447427	38.86 mm	6 mm x 2.8 mm	11000 RPM	3	20.57 mm	10.17 N-m	33.27 mm	0.121 lbs.-sq. in.	€16.97
A	68514466758	38.86 mm	5 mm x 2.3 mm	11000 RPM	3	20.57 mm	10.17 N-m	33.27 mm	0.121 lbs.-sq. in.	€16.17
A	68514458622	38.86 mm	5 mm x 2.3 mm	9000 RPM	3	23.11 mm	16.27 N-m	36.32 mm	0.271 lbs.-sq. in.	€24.76
A	68514449633	38.86 mm	5 mm x 2.3 mm	11000 RPM	3	20.57 mm	10.17 N-m	33.27 mm	0.121 lbs.-sq. in.	€16.97
A	68514459394	38.86 mm	6 mm x 2.8 mm	11000 RPM	3	20.57 mm	10.17 N-m	33.27 mm	0.121 lbs.-sq. in.	€16.97
A	68514458621	38.86 mm	5 mm x 2.3 mm	9000 RPM	3	23.11 mm	16.27 N-m	36.32 mm	0.271 lbs.-sq. in.	€24.76
A	68514444679	38.86 mm	6 mm x 2.8 mm	9000 RPM	3	23.11 mm	16.27 N-m	36.32 mm	0.271 lbs.-sq. in.	€26.00
A	68514449634	52.32 mm	6 mm x 2.8 mm	7000 RPM	3	26.16 mm	35.93 N-m	45.21 mm	0.644 lbs.-sq. in.	€50.68
A	68514458627	52.32 mm	8 mm x 3.3 mm	7000 RPM	3	26.16 mm	35.93 N-m	45.21 mm	0.644 lbs.-sq. in.	€52.86
A	68514452048	52.32 mm	8 mm x 3.3 mm	7000 RPM	3	26.16 mm	35.93 N-m	45.21 mm	0.644 lbs.-sq. in.	€50.68
A	68514458625	52.32 mm	6 mm x 2.8 mm	7000 RPM	3	26.16 mm	35.93 N-m	45.21 mm	0.644 lbs.-sq. in.	€50.68
A	68514458626	52.32 mm	8 mm x 3.3 mm	7000 RPM	3	26.16 mm	35.93 N-m	45.21 mm	0.644 lbs.-sq. in.	€50.68

LOVEJOY -

CJ Series Hubs, Powder Metal, A And B Style Inch Bores

Style	Model	Coupling Size	Outside Dia.	Overall Coupling Length	Max. Speed	Hub Material	Keyway Size	Dimension G	Dimension Hd	Price
A	68514461984	14	1.18"	1.38"	1900 RPM	Powder Metal	No Keyway	0.51"	1.18"	€25.19
B	68514462000	19	1.57"	2 3/5"	14000 RPM	Powder Metal	-	0.63"	1.57"	€33.62
A	68514476356	19	1.57"	2 3/5"	14000 RPM	Powder Metal	No Keyway	0.63"	1.26"	€35.30
A	68514476359	19	1.57"	2 3/5"	14000 RPM	Metal	3/16" x 3/32"	0.63"	1.26"	€35.30
A	68514461999	19	1.57"	2 3/5"	14000 RPM	Powder Metal	3/16" x 3/32"	0.63"	1.57"	€33.62
A	68514476357	19	1.57"	2 3/5"	14000 RPM	Powder Metal	1/8" x 1/16"	0.63"	1.26"	€35.30
A	68514462010	24	2 1/5"	3.07"	10600 RPM	Powder Metal	1/4" x 1/8"	0.7"	2 1/5"	€50.45
A	68514462009	24	2 1/5"	3.07"	10600 RPM	Powder Metal	1/4" x 1/8"	0.7"	2 1/5"	€50.45
A	68514476362	24	2 1/5"	3.07"	10600 RPM	-	1/8" x 1/16"	0.7"	1.57"	€52.97
A	68514462011	24	2 1/5"	3.07"	10600 RPM	Powder Metal	1/4" x 1/8"	0.7"	2 1/5"	€50.45
A	68514476364	24	2 1/5"	3.07"	10600 RPM	Powder Metal	3/16" x 3/32"	0.7"	1.57"	€52.97
A	68514476365	24	2 1/5"	3.07"	10600 RPM	Powder Metal	3/16" x 3/32"	0.7"	1.57"	€52.97
A	68514462016	28	2 14/25"	3.54"	8500 RPM	Powder Metal	1/4" x 1/8"	0.79"	2 14/25"	€67.29
A	68514462013	28	2 14/25"	3.54"	8500 RPM	Powder Metal	3/16" x 3/32"	0.79"	1.89"	€67.29
A	68514462017	28	2 14/25"	3.54"	8500 RPM	Powder Metal	1/4" x 1/8"	0.79"	2 14/25"	€67.29
A	68514462015	28	2 14/25"	3.54"	8500 RPM	Powder Metal	3/16" x 3/32"	0.79"	1.89"	€61.12
A	68514462018	28	2 14/25"	3.54"	8500 RPM	Powder Metal	1/4" x 1/8"	0.79"	2 14/25"	€67.29
A	68514462012	28	2 14/25"	3.54"	8500 RPM	Powder Metal	No Keyway	0.79"	1.89"	€70.66
A	68514462014	28	2 14/25"	3.54"	8500 RPM	-	3/16" x 3/32"	0.79"	1.89"	€61.12
A	68514466873	28	2 14/25"	3.54"	8500 RPM	Powder Metal	3/8" x 3/16"	0.79"	2 14/25"	€59.87
A	68514462019	28	2 14/25"	3.54"	8500 RPM	Powder Metal	5/16" x 5/32"	0.79"	2 14/25"	€83.32
A	68514462030	38	3.15"	4.49"	7100 RPM	Powder Metal	3/8" x 3/16"	0.94"	3.15"	€88.31
A	68514462025	38	3.15"	4.49"	7100 RPM	Powder Metal	1/4" x 1/8"	0.94"	2 3/5"	€92.72
A	68514462027	38	3.15"	4.49"	7100 RPM	Powder Metal	5/16" x 5/32"	0.94"	2 3/5"	€92.72
A	68514462024	38	3.15"	4.49"	7100 RPM	Powder Metal	1/4" x 1/8"	0.94"	2 3/5"	€88.31

DAYTON -

Jaw Coupling Hubs
Dayton jaw coupling hubs are connected with drive shafts for handling heavy loads and providing safer power transmission, even in high temperature applications. These units feature sintered iron / steel construction that requires no lubrication and can protect against dirt, debris, grease, oil and moisture. The complete assembly requires two jaw hubs and a spider for creating a smooth interaction between the two components. They can counter the inevitable misalignment between the connecting shafts and dampen shocks & vibrations. Choose from an array of these jaw coupling hubs, available in lengths ranging from 26.68 to 77.80 mm.

Style	Model	Bore Dia.	Keyway Size	Outside Dia.	Overall Coupling Length	Hub Material	For Shaft Type	Coupling Size	Overall Length	Price
A	29HY72	1 1/2"	3/8" x 3/16"	3.31"	4 15/64"	Sintered Iron	Keyed	L110	2.49"	€96.98
A	29HY53	1 1/2"	3/8" x 3/16"	3 3/4"	4 1/2"	Sintered Iron	Keyed	L150	2.69"	€126.41
A	29HY64	1 1/2"	3/8" x 3/16"	4 1/2"	4 7/8"	Steel	-	-	3.06"	€170.55
A	29HY70	1 1/4"	1/4" x 1/8"	3.31"	4 15/64"	Sintered Iron	Keyed	L110	2.49"	€97.09
A	29HY92	1 1/4"	1/4" x 1/8"	2 17/32"	3 1/2"	Sintered Iron	Keyed	L100	2.05"	€62.76
A	29HY51	1 1/4"	1/4" x 1/8"	3 3/4"	4 1/2"	Sintered Iron	Keyed	L150	2.69"	€127.08
A	29HY62	1 1/4"	1/4" x 1/8"	4 1/2"	4 7/8"	Carbon Steel	Keyed	L190	3.06"	€174.79
A	29HY50	1 1/8"	1/4" x 1/8"	3 3/4"	4 1/2"	Sintered Iron	Keyed	L150	2.69"	€127.51
A	29HY61	1 1/8"	1/4" x 1/8"	4 1/2"	4 7/8"	Carbon Steel	Keyed	L190	3.06"	€170.55
A	29HY69	1 1/8"	1/4" x 1/8"	3.31"	4 15/64"	Sintered Iron	Keyed	L110	2.49"	€97.60
B	29HZ01	1 1/8"	1/4" x 1/8"	2.1"	2 1/2"	Sintered Iron	Round	L095	1.45"	€31.92
A	29HY91	1 1/8"	1/4" x 1/8"	2 17/32"	3 1/2"	Sintered Iron	Keyed	L100	2.05"	€58.10
A	29HY55	1 3/4"	3/8" x 3/16"	3 3/4"	4 1/2"	Sintered Iron	Keyed	L150	2.69"	€126.41
A	29HY71	1 3/8"	5/16" x 5/32"	3.31"	4 15/64"	Sintered Iron	Keyed	L110	2.49"	€97.61
A	29HY63	1 3/8"	5/16" x 5/32"	4 1/2"	4 7/8"	Carbon Steel	Keyed	L190	3.06"	€170.05
A	29HY52	1 3/8"	5/16" x 5/32"	3 3/4"	4 1/2"	Sintered Iron	Keyed	L150	2.69"	€126.58
A	29HY93	1 3/8"	5/16" x 5/32"	2 17/32"	3 1/2"	Sintered Iron	Keyed	L100	2.05"	€58.12
A	29HY65	1 5/8"	3/8" x 3/16"	4 1/2"	4 7/8"	Carbon Steel	Keyed	L190	3.06"	€176.41
A	29HY54	1 5/8"	3/8" x 3/16"	3 3/4"	4 1/2"	Sintered Iron	Keyed	L150	2.69"	€127.60
A	29HY73	1 5/8"	3/8" x 3/16"	3.31"	4 15/64"	Sintered Iron	Keyed	L110	2.49"	€97.77
A	29HY56	1 7/8"	1/2" x 1/4"	3 3/4"	4 1/2"	Sintered Iron	Keyed	L150	2.69"	€126.78
A	29HY66	1 7/8"	1/2" x 1/4"	4 1/2"	4 7/8"	-	Keyed	L190	3.06"	€170.55
A	29HZ04	1"	1/4" x 1/8"	2 17/32"	3 1/2"	Sintered Iron	Keyed	L100	2.05"	€64.09
A	29HY90	1"	1/4" x 1/8"	2.1"	2 1/2"	Sintered Iron	Keyed	L095	1.45"	€30.92
A	29HY60	1"	1/4" x 1/8"	4 1/2"	4 7/8"	Carbon Steel	Keyed	L190	3.06"	€176.80

LOVEJOY -

SS Type Hubs Without Keyway, Inch Bores
Lovejoy SS style jaw coupling hubs are designed for power transmission and accommodating shaft misalignment in gearboxes, electric pumps, motors, blowers and compressors. They transfer misalignments and shocks to the central part of the coupling assembly for wear minimisation on the shaft assembly. These SS hubs feature finished bores to ensure rust protection and are capable of performing even in case of elastomer failure.

Style	Model	Outside Dia.	Max. Bore	Dimension G	Hub Length	Keyway Size	Hub Material	Keyway	Color	Price
A	68514470006	1 9/25"	7/8"	1/2"	1 8/25"	No Keyway	Stainless Steel	Without Keyway	Metallic	€105.13
A	68514476406	2.11"	1"	13/25"	1 13/25"	No Keyway	Stainless Steel	Without Keyway	Metallic	€214.13

MARTIN SPROCKET -

Universal Series Jaw Couplings, Stainless Steel

Style	Model	Coupling Size	Outside Dia.	Keyway Size	Length Through Bore	Type	Material	Price
A	ML075SS 3/4	075	1 3/4"	3/16" x 3/32"	13/16"	Finished	Steel	€103.46
B	ML075SSBLK 1/4	075	1 3/4"	-	13/16"	Reborable Bore	Steel	€98.28
C	ML075SS 7/8	075	1 3/4"	3/16" x 3/32"	13/16"	Finished	Steel	€103.46
D	ML075SS 1/2	075	1 3/4"	1/8" x 1/16"	13/16"	Finished	Steel	€103.46
E	ML075SS 5/8	075	1 3/4"	3/16" x 3/32"	13/16"	Finished	Steel	€103.46
F	ML075SS 1/4	075	1 3/4"	-	13/16"	Reborable Bore	Steel	€103.46
G	ML090SSBLK 1/4	090	2 1/8"	-	13/16"	Reborable Bore	Steel	€110.06
H	ML095SS 3/4	095	2 1/8"	3/16" x 3/32"	1"	Finished	Steel	€128.23
I	ML095SS 1/2	095	2 1/8"	1/8" x 1/16"	1"	Finished	Steel	€128.23
D	ML095SS 1 1/8	095	2 1/8"	1/4" x 1/8"	1"	Finished	Steel	€128.23
J	ML095SS 1	095	2 1/8"	-	1"	Bored to Size	Steel	€128.23
K	ML095SSBLK 7/16	095	2 1/8"	-	1"	Reborable Bore	Steel	€121.84
L	ML095SS 1/4	095	2 1/8"	-	1"	Reborable Bore	Steel	€128.23
M	ML095SS 5/8	095	2 1/8"	3/16" x 3/32"	1"	Finished	Steel	€128.23
N	ML095SS 7/8	095	2 1/8"	3/16" x 3/32"	1"	Finished	Steel	€128.23
J	ML100SS 1 3/8	100	2.531"	-	1 3/8"	Bored to Size	Steel	€151.00
O	ML100SS 7/8	100	2.531"	-	1 3/8"	Bored to Size	Steel	€151.00
P	ML100SS 3/4	100	2.531"	3/16" x 3/32"	1 3/8"	Finished	Steel	€151.00
D	ML100SS 1 1/8	100	2.531"	1/4" x 1/8"	1 3/8"	Finished	Steel	€151.00
J	ML100SS 1	100	2.531"	-	1 3/8"	Bored to Size	Steel	€151.00
Q	ML100SSBLK 1/2	100	2.531"	-	1 3/8"	Reborable Bore	Steel	€143.47
R	ML110SSBLK 5/8	110	3.938"	-	1.6905"	Reborable Bore	Steel	€269.28
S	ML110SS 1 3/8	110	3.938"	5/16" x 5/32"	1.6905"	Finished	Steel	€283.47
T	ML110SS 1	110	3.938"	-	1.691"	Bored to Size	Steel	€283.47
U	ML110SS 1 5/8	110	3.938"	3/8" x 3/16"	1.6905"	Finished	Steel	€283.47

LOVEJOY -

AL Type Hubs Without Keyway, Inch Bores
The AL-Type hubs by Lovejoy are used with coupling spiders to create AL Type couplings. These lightweight Lovejoy hubs feature aluminium construction, a maximum rotational speed of 18000 rpm and a nominal torque rating of up to 1240 in.lb. They do not require lubrication and are interchangeable with all standard coupling hubs. These quality AL Type hubs are available in different bore diameters, keyway sizes and overall lengths.

Style	Model	Max. Speed	Number Of Jaws	Nominal Torque	Max. Bore	Moment Of Inertia (solid) Wr2	Set Screw Style Coupling Location Size	Hub Type	Dimension G	Price
A	68514417914	-	3	417 lbs.-in.	1 3/8"	1.207 lbs.-sq. in.	11/25"	1	3/4"	€79.60
A	68514418035	5000 RPM	4	1240 lbs.-in.	1 7/8"	72 lbs.-sq. in.	0.63"	2	1"	€133.21
A	68514417977	5000 RPM	3	792 lbs.-in.	1 5/8"	3.531 lbs.-sq. in.	3/4"	1	0.87"	€102.41
A	68514456473	7000 RPM	3	417 lbs.-in.	1 3/8"	1.207 lbs.-sq. in.	11/25"	1	3/4"	€52.84
A	68514417880	7000 RPM	3	318 lbs.-in.	1.187"	0.644 lbs.-sq. in.	11/25"	2	3/4"	€79.19
A	68514476261	7000 RPM	3	417 lbs.-in.	1 3/8"	1.207 lbs.-sq. in.	11/25"	1	3/4"	€103.59
A	68514410794	9000 RPM	3	144 lbs.-in.	7/8"	0.271 lbs.-sq. in.	0.34"	2	13/25"	€26.00
A	68514410791	9000 RPM	3	144 lbs.-in.	7/8"	0.271 lbs.-sq. in.	0.34"	2	13/25"	€24.76
A	68514410792	9000 RPM	3	144 lbs.-in.	7/8"	0.271 lbs.-sq. in.	0.34"	2	13/25"	€29.58
A	68514410793	9000 RPM	3	144 lbs.-in.	7/8"	0.271 lbs.-sq. in.	0.34"	2	13/25"	€26.00
A	68514444004	9000 RPM	3	144 lbs.-in.	7/8"	0.271 lbs.-sq. in.	0.34"	2	13/25"	€26.00
A	68514410797	9000 RPM	3	144 lbs.-in.	7/8"	0.271 lbs.-sq. in.	0.34"	2	13/25"	€26.00
A	68514417847	9000 RPM	3	194 lbs.-in.	1 1/8"	0.336 lbs.-sq. in.	11/25"	1	1/2"	€40.07
A	68514410795	9000 RPM	3	144 lbs.-in.	7/8"	0.271 lbs.-sq. in.	0.34"	2	13/25"	€29.09
A	68514410633	11000 RPM	3	90 lbs.-in.	7/8"	0.121 lbs.-sq. in.	0.31"	2	1/2"	€16.97
A	68514461817	11000 RPM	3	90 lbs.-in.	7/8"	0.121 lbs.-sq. in.	0.31"	2	1/2"	€16.97
A	68514410632	11000 RPM	3	90 lbs.-in.	7/8"	0.121 lbs.-sq. in.	0.31"	2	1/2"	€16.97
A	68514410630	11000 RPM	3	90 lbs.-in.	7/8"	0.121 lbs.-sq. in.	0.31"	2	1/2"	€16.97
A	68514410634	11000 RPM	3	90 lbs.-in.	7/8"	0.121 lbs.-sq. in.	0.31"	2	1/2"	€16.97
A	68514410637	11000 RPM	3	90 lbs.-in.	7/8"	0.121 lbs.-sq. in.	0.31"	2	-	€16.97
A	68514410631	11000 RPM	3	90 lbs.-in.	7/8"	0.121 lbs.-sq. in.	0.31"	2	1/2"	€16.97
A	68514410463	14000 RPM	2	43.2 lbs.-in.	3/4"	0.04 lbs.-sq. in.	0.38"	1	1/2"	€15.54
A	68514410469	14000 RPM	2	43.2 lbs.-in.	3/4"	0.04 lbs.-sq. in.	0.38"	1	1/2"	€15.54
A	68514410471	14000 RPM	2	43.2 lbs.-in.	3/4"	0.04 lbs.-sq. in.	0.38"	1	1/2"	€15.54
A	68514410480	14000 RPM	2	43.2 lbs.-in.	3/4"	0.04 lbs.-sq. in.	0.38"	1	1/2"	€14.80

LOVEJOY -

LC Type Hubs With Keyway, Metric Bores
Lovejoy LC style jaw couplings are designed for accommodating shaft misalignment & power transmission for gearboxes, electric pumps, motors, compressors and blowers. These jaw couplings feature radially removable snap wrap elastomer for ease-of-maintenance, collar attachment for securely holding centre element in place and sintered iron construction for safe operation even upon elastomer failure. Choose from a broad range of these couplings, available in speed ratings of 5000 & 9000 rpm on Raptor Supplies.

Style	Model	Keyway Size	Outside Dia.	Max. Speed	Overall Length	Length Through Bore	Nominal Torque	Max. Bore	Min. Bore	Price
A	68514458560	6 mm x 2.8 mm	53.59 mm	9000 RPM	63.5 mm	25.4 mm	21.92 N-m	29 mm	11 mm	€39.50
A	68514458575	8 mm x 3.3 mm	114.3 mm	5000 RPM	123.95 mm	49.28 mm	195.24 N-m	54 mm	19 mm	€184.47

BOSTON GEAR -

Jaw Coupling Hubs

Style	Model	Coupling Size	Bore Dia.	Keyway Size	Outside Dia.	Overall Length	Length Through Bore	Size	Hub Projection	Price
A	SSFC12 3/8	FC12	3/8"	3/32" x 3/64"	1 1/4"	2.31"	4/5"	SSFC12	5/8"	-	RFQ
A	SSFC15 1/2	FC15	1/2"	1/8" x 1/16"	1 1/2"	2 3/4"	1"	SSFC15	3/4"	-	RFQ
A	SSFC15 3/4	FC15	3/4"	3/16" x 3/32"	1 1/2"	2 3/4"	1"	SSFC15	3/4"	-	RFQ
A	SSFC20 5/8	FC20	5/8"	3/16" x 3/32"	2"	3.69"	1 2/5"	SSFC20	1 1/8"	€249.62
A	SSFC20 7/8	FC20	7/8"	3/16" x 3/32"	2"	3.69"	1 2/5"	SSFC20	1 1/8"	-	RFQ
A	SSFC20-1	FC20	1"	1/4" x 1/8"	2"	3.69"	1 2/5"	SSFC20	1 1/8"	€277.67

LOVEJOY -

C Type Hubs With Keyway, Inch Bores

Style	Model	Keyway Size	Max. Speed	Outside Dia.	Number Of Jaws	Length Through Bore	Min. Bore	Dimension G	Hub Length	Price
A	68514449351	1" x 1/2"	2300 RPM	9 3/25"	5	4 1/4"	1 3/4"	1 22/25"	6.13"	€889.58
A	68514455016	1" x 1/2"	2300 RPM	9 3/25"	5	4 1/4"	1 3/4"	1 22/25"	6.13"	€910.18
A	68514444370	1/2" x 1/4"	3500 RPM	7 1/2"	3	3 3/25"	1 1/4"	1.63"	4 3/4"	€506.88
A	68514448194	1/2" x 1/4"	3500 RPM	7 1/2"	3	3 3/25"	1 1/4"	1.63"	4 3/4"	€506.88
A	68514426046	1/2" x 1/4"	4800 RPM	5.15"	3	2 3/4"	7/8"	1 1/2"	4 1/4"	€336.77
A	68514447080	1/2" x 1/4"	2300 RPM	9 3/25"	3	3 3/4"	1 1/2"	1 22/25"	5.63"	€588.58
A	68514444012	1/2" x 1/4"	3500 RPM	7 1/2"	3	3 3/25"	1 1/4"	1.63"	4 3/4"	€506.88
A	68514449809	1/2" x 1/4"	3200 RPM	8 1/2"	3	3 3/4"	1 1/4"	1.63"	5.38"	€617.76
A	68514426044	1/2" x 1/4"	4800 RPM	5.15"	3	2 3/4"	7/8"	1 1/2"	4 1/4"	€336.77
A	68514444547	1/2" x 1/4"	4200 RPM	6.18"	3	3 3/25"	7/8"	1.63"	4 3/4"	€446.63
A	68514426043	1/2" x 1/4"	4800 RPM	5.15"	3	2 3/4"	7/8"	1 1/2"	4 1/4"	€336.77
A	68514426045	1/2" x 1/4"	4800 RPM	5.15"	3	2 3/4"	7/8"	1 1/2"	4 1/4"	€336.77
A	68514449075	1/2" x 1/4"	2300 RPM	9 3/25"	5	4 1/4"	1 3/4"	1 22/25"	6.13"	€965.95
A	68514426057	1/2" x 1/4"	4200 RPM	6.18"	3	3 3/25"	7/8"	1.63"	4 3/4"	€441.54
A	68514426036	1/4" x 1/8"	4800 RPM	5.15"	3	2 3/4"	7/8"	1 1/2"	4 1/4"	€353.72
A	68514426050	1/4" x 1/8"	4200 RPM	6.18"	3	3 3/25"	7/8"	1.63"	4 3/4"	€420.95
A	68514426037	1/4" x 1/8"	4800 RPM	5.15"	3	2 3/4"	7/8"	1 1/2"	4 1/4"	€353.72
A	68514426051	1/4" x 1/8"	4200 RPM	6.18"	3	3 3/25"	7/8"	1.63"	4 3/4"	€420.95
A	68514449456	3/4" x 3/8"	3200 RPM	-	3	3 3/4"	1 1/4"	1.63"	5.38"	€615.92
A	68514448193	3/4" x 3/8"	3500 RPM	7 1/2"	3	3 3/25"	1 1/4"	1.63"	4 3/4"	€506.88
A	68514448108	3/4" x 3/8"	2300 RPM	9 3/25"	5	4 1/4"	1 3/4"	1 22/25"	6.13"	€910.18
A	68514426064	3/4" x 3/8"	4200 RPM	6.18"	3	3 3/25"	7/8"	1.63"	4 3/4"	€446.63
A	68514452702	3/4" x 3/8"	2300 RPM	9 3/25"	3	3 3/4"	1 1/2"	1 22/25"	5.63"	€845.75
A	68514451525	3/4" x 3/8"	3500 RPM	7 1/2"	3	3 3/25"	1 1/4"	1.63"	4 3/4"	€506.88
A	68514444824	3/8" x 3/16"	2300 RPM	9 3/25"	3	3 3/4"	1 1/2"	1 22/25"	5.63"	€845.75

12...9 10

Jaw Coupling Hubs

Jaw couplings are a type of flexible couplings designed to link two rotating shafts that are not properly aligned for transferring the rotational power or torque from one shaft to another. The jaw couplings are suitable for diverse industrial applications due to their versatile & robust construction and good speed capability, chemical resistance & dampening capability. Jaw couplings are easy to install, as they consist of only two jaw coupling hubs and a spider. These jaw coupling hubs are attached to the shafts and the spider flexes between the hubs for accommodating the misalignment & shocks. Shaft misalignments are mostly radial, parallel or angular and cause complications to transferring rotational power from one shaft to the other in the form of loads, vibrations, stresses and other forces, which change as per the type of misalignment.
The jaw coupling hubs are popular due to their fail-safe design that ensures interlocking of the coupling & continued operation (up to a certain extent) even after the elastomeric spider fails, wears out or gets loosened. Unlike gear, grid or chain couplings, jaw coupling hubs are also maintenance-free as they do not require periodic application of grease or additional maintenance (provided that the spider remains intact). These jaw coupling hubs are made of cast iron, powder metal, sintered iron, sintered carbon steel, steel or zinc alloy to ensure high compression strength and durability. They are also offered in aluminium or stainless steel construction for lightweight and resistance to corrosion in food & pharmaceutical environments.
Lovejoy jaw coupling hubs are available in two broad types: straight jaw coupling hubs and curved jaw coupling hubs. Straight jaw hubs are made from a diverse range of materials and feature straight jaws for adjusting to various styles of spiders. They are used with open centre spiders, snap wrap spiders with retainer rings; closed centre spiders having Nitrile Butadiene (Buna N), urethane, Hytrel or bronze construction. Curved jaw coupling hubs (Lovejoy CJ Series) on the other hand, feature a curved jaw profile that concentrates the torque to the central region of the spider's limbs, thereby improving the efficiency of the elastomer material and reduces rotational backlash. They are mostly used with open centre elastomeric spiders to accommodate shafts having little separation.
Choose from a wide range of these jaw coupling hubs, available in both unbored and bored variants on Raptor Supplies. The bored variants are offered in bore sizes ranging from 1/8 to 4 inches.

Uses

Jaw coupling hubs are ideal for linking two shafts when used in conjunction with elastomeric inserts or spiders to form couplings. These jaw coupling hubs are used in a wide range of motion control (servo) applications, such as conveyors, escalators, motor vehicles, forestry, agricultural & mining equipment in robotics, automobile, aeronautics and space industries.

Features

Jaw coupling hubs in conjunction with spiders form jaw couplings and are used to transmit rotational power from one shaft to another.
They are equipped with an optional bore or a hole at the centre of the hub for ease of mounting on the shafts. Users can identify the bore size or bore diameter of a hub for selecting a correct sized jaw coupling hub for their use.
These hub bores may also have keyway slots to fit a key and prevent slipping of the hub on the rotating shaft. Keyway size indicates the height and width of the keyway slot to fit in the right sized key.
The jaw coupling hubs have an effective length through the bore to help them slide-fit on the shaft & the optional key.
These hubs handle the torque from the driving shaft and pass it onto a driven shaft while handling shocks, vibrations & angular misalignment. Torque refers to the applied force causing rotational motion. In imperial units, torque is expressed as inch-pounds (in.-lbs.) whereas, in metrics, it is expressed as Newton-meters (Nm).
They have diverse types of designs, constructions and bore tolerances for handling a wide range of rotational speeds (maximum speed).
These jaw coupling hubs feature fail-safe mechanism for continuing the operation up to a certain time, in case the shock-absorbing spider inserts wear down or fail to interlock.
They provide highly reliable service without any metal to metal contact to prevent regular wear & tear.
These jaw coupling hubs are resistant to oil, dirt, moisture & grease for ensuring long term operation.

Working Mechanism

A jaw coupling is made of three parts: two metallic hubs (jaw coupling hub) and an elastomer insert / element or spider. The spider has many lobes to fit the jaws of hubs alternatively for a tight press fit. Once the machinery starts running & the driving shaft starts rotating, the hub jaws attached to the driving shaft push towards the driven hub jaws and thereby towards the stationary shaft.
The jaws being locked together leads to torque transfer and rotation of the stationary shaft. The jaw coupling torque is then transmitted through the elastomer / spider lobes compressed between the hub jaws. These elastomeric spider legs act as coupling absorbers and help in cushioning the force between the driving & driven jaws. They absorb the vibration and shock from torque transfer and consequently protect the surrounding components from getting damaged.

Standards and Approvals

Lovejoy jaw coupling hubs meet the ANSI/AGMA 9002-B04 or 9112-A04 and ISO 9001:2008 industry standards for superior performance of the hubs.

Frequently Asked Questions

Popular Search Queries

Keyed Shaft

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Jaw Coupling Hubs

Flexible Jaw Couplings

Coupling Hubs

Super Series Jaw Couplings

L Type Hubs With Keyway, Metric Bores

L Type Hubs With Keyway, Inch Bores

AL Type Hubs With Keyway, Inch Bores

L Type Hubs, Special Short And Long Hubs

L Type Hubs, Splines And Special Bores

GS Series Aluminum Hubs, Inch Bores

H Type Coupling Hubs, Rough Stock Bore

JCC Series Jaw Coupling With Keyways

Universal Series Jaw Couplings

AL Type Hubs With Keyway, Metric Bores

CJ Series Hubs, Powder Metal, A And B Style Inch Bores

Universal Series Jaw Couplings, Stainless Steel

Jaw Coupling Hubs

C Type Hubs With Keyway, Inch Bores

Jaw Coupling Hubs

Uses

Features

Working Mechanism

Standards and Approvals

Frequently Asked Questions

Popular Search Queries

Explore More

Select your cookie preferences

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Jaw Coupling Hubs

Jaw Coupling Hubs

Uses

Features

Working Mechanism

Standards and Approvals

Frequently Asked Questions

How to install a jaw coupling hub?

What is the difference between rigid and flexible jaw coupling?

What are some common mistakes the users make while selecting a jaw coupling hub?

How to choose the right jaw coupling hub?

What is the difference between keyway and keyless jaw coupling hubs?

Popular Search Queries

Explore More