WINSMITH E17CDSS51160D4 Gear Reducer, 56C Input Flange, 3-Piece Coupled
Get it by Thursday, Dec 18
€971.05 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Speed Reducer |
Shipping Info:
| Ship weight (kg) | 14.4 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Model | Output Shaft Type | Motor Frame Designation | Gear Ratio | Overhung Load | Max. Input Hp | Output Type | Frame | Nominal Output Rpm | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| E17MWNS 60:1 56C | Keyed | 56C | 601 | 650 lbs. | 1/4 hp | - | 56C | 29 RPM | €920.81 | |
| E17MWNS 50:1 56C | Keyed | 56C | 501 | 650 lbs. | 3/10 hp | - | 56C | 35 RPM | €920.81 | |
| E17MWNS 40:1 56C | Keyed | 56C | 401 | 650 lbs. | 1/2 hp | - | 56C | 43 RPM | €1,011.08 | |
| E17MWNS 30:1 56C | Keyed | 56C | 301 | 650 lbs. | 1/2 hp | - | 56C | 58 RPM | €920.81 | |
| E17MWNS 20:1 56C | Keyed | 56C | 201 | 650 lbs. | 3/4 hp | - | 56C | 86 RPM | €920.81 | |
| E17MWNS 15:1 56C/140TC | Hollow | 56C/140TC | 151 | 650 lbs. | 1 hp | - | - | 115 RPM | €1,011.08 | |
| E17MWNS 10:1 56C/140TC | Hollow | 56C/140TC | 101 | 650 lbs. | 1 1/2 hp | - | - | 172 RPM | €1,011.08 |
Explore Products
- KIPP K1595.062X12 Bolt, 9.2 mm Head Ht., 10 mm Head Wd., 14 mm Head Dia., FT, Right Hand, Std Flange
- 80/20 13-8518 M8 x 18 mm SHCS, Blue
- WOODHEAD 1200790214 W03001A09M050 Cordset, 3 Pole, Female, 5m, 90 Degree, 22/3 Size, PVC
- KURT MIX90-04-04 Hydraulic Crimp Fitting
- TEMPIL 28006 Temperature Indicator Stick 150 Degree F
- MONOPRICE 13521 Slim Cat6 Utp Network Cable, 1 Ft Yellow
- CLEVELAND C33179 0 End Mill High Speed Steel 1 4 Flutes Single Square End Cc
- GRAINGER 51EU12 V-Belt, Cogged
Explore More
- DUCTMATE
- GUARDIAN EQUIPMENT
- KEYSHAFT
- ANTUNES
- CARRIER
- Flare Nut Wrench Sets
- Signal Conditioner
- Negative Air Machine Accessories
- Conveyor H-Stands
- Oil Burner Parts
- DWYER INSTRUMENTS ISDP Series Intrinsically Safe Differential Pressure Transmitters
- ALLPAX GASKET CUTTER SYSTEMS Bottom Shaft Rebuild Kits
- VIEGA PROPRESS Tailpiece, Press x Female Union
- ANVIL 261 Series Riser Clamps, Steel, Black
- TENNSCO Stringer
- VELVAC 16 to 14 AWG Ring Terminal
- CONRADER NL Series Pilot Unloader Check Valves
- MARTIN SPROCKET Conveyor Series Stock Bore A Type Roller Chain Sprockets, 2080 Chain Number
- GOODMAN Drain Pans
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WINSMITH E17CDSS51160D4 Gear Reducer, 56C Input Flange, 3-Piece Coupled
€971.05 /unit