WEG 07518OT3E365TF2-W40 14270941 General Purpose Motor, ODP Cast Iron 364/5T Frame, 60 HP, 1484 RPM, 415V, F-2 Mounting
Get it by Tuesday, Aug 25
€6,481.64 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | AC Motor |
| Altitude | 1000 m.a.s.l. |
| Ambient Temp. | -20°C to +40°C |
| Amps | 80.1A |
| Balancing Method | 1/2 Key |
| Bearing Cap | Yes |
| Bolt Material | Carbon Steel |
| Break Down Torque | 280% |
| Cold Locked Rotor Time | 23 sec. |
| Connection Cables Quantity | 12 |
| De Bearing Seal | No |
| Degree Of Protection | IP23 |
| Design | B |
| Drip Cover | Without |
| Duty Cycle | Cont.(S1) |
| Enclosure Rating | IC01 |
| Enclosure Type | Open Dripproof |
| Fan Cover Material | Without Fan Cover |
| Fan Material | Without Fan |
| Flange | Without |
| Frame | 364/5t |
| Frame Material | Cast Iron |
| Frequency | 50/60 Hz |
| Grade | Grade 1010/20 |
| Grounding Lugs Type | Double |
| Impregnation Method | Constant Resin Flow |
| Insulation Class | F |
| L. R. Amps | 609A |
| Locked Rotor Time(hot) | 13 sec. |
| Locked Rotor Torque | 250% |
| Lrc | 7.6x(Code J) |
| Main Terminal Box Hole | 3" |
| Main Terminal Box Hole Type | NPT |
| Material | Carbon Steel |
| Moment Of Inertia | 16.8 lbs.-sq. ft. |
| Mounting | Foot-Mounted, F-2 |
| Nde Bearing Seal | No |
| No Load Amps | 36.1A |
| No. Of Poles | 4 |
| Noise Level | 69 dBA |
| Output Rating | 45 kW |
| Overload Protector (phenolic) | Without Overload Protector |
| Painting | Only Primer |
| Product Datasheet | weg-07518ot3e365tf2-w40.pdf |
| Rated Speed | 1484 RPM |
| Rated Torque | 212 lbs.-ft. |
| Regreasing System | At Drive End And Non-Drive End |
| Rotation | CW And CCW |
| Service Factor | 1 |
| Shaft Locking Device | Without |
| Shaft Material | SAE 1040/45 Carbon Steel |
| Slip | 1.07% |
| Starting Method | Direct On Line |
| Synchronous Speed | 1800 RPM |
| Temp. Rise | 80 K |
| Terminal Block | Without |
| Terminal Box | Right Position |
| Tropicalized Painting | Without |
| Voltage | 230/460/380V , 415V |
Shipping Info:
| Ship weight (kg) | 364.95 |
Documentation:
Explore Products
- ENERPAC ca646051 Piston Assm
- MICRO 100 QBB5-120600X Boring Bar, 0.1200 In Head Wd, 0.1320 In Min Bore, 0.600 In Max Dp, AlTiN
- CHICAGO-LATROBE 41783 Jobber Length Drill Bit, M Size, 3 1/16 Inch Flute Length, 9/32 Inch Shank Dia.
- VIKAN 70673 Washing Brush With Angle Adjustment, 9.4 Inch Length, Water-Fed, Soft Split Bristle, Blue
- ECEF 67201307501 Compass Wrench, 13,0mm Size
- APOLLO VALVES 10046208 Cap, 11/2 Inch
- INTERNAL TOOL 79-1925 Metric Head Steel Shank Key Cutter, 0.0787 Inch Width, 0.9440 Inch Dia, 12 Flute
- SMC VALVES CDNA2F50-250-D-M9PVSAPC Lock Up Cylinder
Explore More
- KEYSHAFT
- NU-CALGON
- RED HEAD BRASS
- WILEY X
- AMERICAN BIOTECH SUPPLY
- Signal Conditioner
- Sanding Sheet Hand Pad Holders and Blocks
- Label Maker Ribbon Cartridges
- Humidifier and Dehumidifier Accessories
- Welding Positioners
- CONDOR High-Visibility Vest, ANSI Class 3, Mesh Polyester, Hook And Loop, Lime
- HONEYWELL Rig Dog Knit Water Resistant Gloves
- YELLOW JACKET Plus II Hoses, 1/4 Inch Flare Fittings
- GLOBE SCIENTIFIC Diamond Essentials PMP Griffin Style Low Form Beakers with Handle
- ANVIL AS6153 Series Safety End Caps
- PARKER Replacement Compressed Air Filter Elements
- APPROVED VENDOR Grade 2011 Aluminum Standard Crown Acorn Nuts
- APPROVED VENDOR Flush Mount on Both Sides 1/8" Open End Blind Rivets
- APPROVED VENDOR 5/16" Pin Dia. Alloy Steel Standard Dowel Pins
- JUSTRITE Cease-Fire Series Waste Receptacles For Cigarette Disposal
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 07518OT3E365TF2-W40 14270941 General Purpose Motor, ODP Cast Iron 364/5T Frame, 60 HP, 1484 RPM, 415V, F-2 Mounting
€6,481.64 /unit