WEG 02018ET3V256T-W22 17612160 General Purpose Motor, TEFC Cast Iron 254/6T Frame, 20 HP, 1770 RPM, 200/400 V
Get it by Monday, Aug 24
€2,560.31 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | AC Motor |
| Altitude | 1000 m.a.s.l. |
| Ambient Temp. | -20°C to +40°C |
| Balancing Method | 1/2 Key |
| Bearing Cap | Yes |
| Break Down Torque | 260% |
| Cold Locked Rotor Time | 54 sec. |
| Connection Cables Quantity | 12 |
| De Bearing Seal | V Ring |
| Degree Of Protection | IP55 |
| Design | B |
| Drain | Rubber, Automatic |
| Drip Cover | Without |
| Duty Cycle | Cont.(S1) |
| Enclosure Rating | IC411 |
| Enclosure Type | Totally Enclosed Fan Cooled |
| Fan Cover Material | Cast Iron |
| Fan Material | Plastic |
| Flange | Without |
| Frame | 254/6t |
| Frame Material | Cast Iron |
| Frequency | 60 Hz |
| Grade | Grade 1010/20 |
| Grounding Lugs Type | Single |
| Impregnation Method | Dip And Bake Polyester |
| Insulation Class | F |
| L. R. Amps | 382/191A |
| Locked Rotor Time(hot) | 30 sec. |
| Locked Rotor Torque | 240% |
| Lrc | 6.9x(Code H) |
| Main Terminal Box Hole | 1 1/2" |
| Main Terminal Box Hole Type | NPT |
| Material | Carbon Steel |
| Moment Of Inertia | 3.1 lbs.-sq. ft. |
| Mounting | Foot-Mounted, F-1 |
| Nde Bearing Seal | V Ring |
| No Load Amps | 22.1/11A |
| No. Of Poles | 4 |
| Noise Level | 64 dBA |
| Output Rating | 15 kW |
| Overload Protector (phenolic) | Without Overload Protector |
| Painting | Only Primer |
| Rated Amps | 55.4/27.7A |
| Rated Speed | 1770 RPM |
| Rated Torque | 59.3 lbs.-ft. |
| Rated Voltage | 200/400V |
| Regreasing System | At Drive End And Non-Drive End |
| Rotation | CW And CCW |
| Service Factor | 1.25 |
| Shaft Locking Device | Without |
| Shaft Material | SAE 1040/45 Carbon Steel |
| Slip | 1.67% |
| Starting Method | Direct On Line |
| Synchronous Speed | 1800 RPM |
| Temp. Rise | 80 K |
| Terminal Block | Without |
| Terminal Box | Left Position |
| Tropicalized Painting | Without |
| Voltage | 200/400V |
Shipping Info:
| Ship weight (kg) | 130.95 |
Explore Products
- UNION BUTTERFIELD 1050149
- FIBERGRATE 879540 Molded Stair Tread Cover Light Gry Poly
- PARKER 8.00BB4MA3U14A05.00 Pneumatic Cylinder
- KEYSHAFT 2 GKS-1045-24 Keyed Shaft, 2 Inch Dia., 24 Inch Length, Carbon Steel
- APOLLO VALVES PWR7481584 Elbow, Gas, 2 Inch Size, 45 Degree, Powerpress
- PARKER 1PSR00011167 Pneumatic Cylinder
- PARKER 1P4MA0022131 Pneumatic Cylinder
- BEHRINGER SYSTEMS SH11075-AL BEHRINGER PIPE SYSTEMS SH11075-AL
Explore More
- FOAMGLAS
- KEYSHAFT
- WALDMANN
- PAN AMERICAN TOOL
- AJAX TOOL WORKS
- Tool Bits
- Pneumatic Flow Control And Needle Valves
- O-Ring Splicing Kits
- Specialty Tools
- DWYER INSTRUMENTS BTLRN Series Long Reach Bimetal Thermometers
- DESTACO 817 Series Pneumatic Toggle Clamps
- RUD CHAIN VRS Starpoint Eye Bolts, Metric Thread With Maximum Length
- CHICAGO PNEUMATIC Industrial Maintenance Air Hammers
- ANVIL AS3033 Series Post Bases
- SHARON PIPING Union
- EATON Dual Lugs
- APPROVED VENDOR 1/2"-13 Fully Threaded, Wire Black Oxide Grade 5 Steel Hex Head Cap Screws
- ANVIL AS300KO Series Channel With Knock Outs
- TEKTON Bit Socket Sets
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 02018ET3V256T-W22 17612160 General Purpose Motor, TEFC Cast Iron 254/6T Frame, 20 HP, 1770 RPM, 200/400 V
€2,560.31 /unit