WEG 01012OT3E256JM-W40 14483182 Pump Motor, 10 HP, 1200 RPM, 208-230/460V, ODP, 254/6JM, Footed
Get it by Friday, Aug 28
€1,856.59 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Close-Coupled Pump Motor |
| Altitude | 1000 m.a.s.l. |
| Ambient Temp. | -20°C to +40°C |
| Balancing Method | 1/2 Key |
| Bearing Cap | Yes |
| Bolt Material | Carbon Steel |
| Break Down Torque | 260% |
| Cold Locked Rotor Time | 28 sec. |
| Connection Cables Quantity | 12 |
| De Bearing Seal | No |
| Degree Of Protection | IP23 |
| Design | B |
| Drip Cover | Without |
| Duty Cycle | Cont.(S1) |
| Efficiency | 50% |
| Efficiency @ 100% | 91.7% |
| Enclosure Rating | IC01 |
| Enclosure Type | ODP |
| Fan Cover Material | Without Fan Cover |
| Fan Material | Without Fan |
| Flange | C |
| Frame | 256JM |
| Frame Material | Cast Iron |
| Frame Size | 256JM |
| Frequency | 60 Hz |
| Full Load Amps | 12.8/25.6-28.3A |
| Grade | Grade 1010/20 |
| Grounding Lugs Type | Single |
| Impregnation Method | Dip And Bake Polyester |
| Insulation Class | Class F |
| L. R. Amps | 174/86.9A |
| Locked Rotor Time(hot) | 16 sec. |
| Locked Rotor Torque | 220% |
| Lrc | 6.6x(Code H) |
| Main Terminal Box Hole | 1 1/2" |
| Main Terminal Box Hole Type | NPT |
| Material | Carbon Steel |
| Mounting | Foot-Mounted, F-1 |
| Nde Bearing Seal | No |
| No Load Amps | 6.5/13A |
| No. Of Poles | 6 |
| Noise | 57 dBA |
| Noise Level | 59 dBA |
| Output Hp | 10 hp |
| Output Rating | 7.5 kW |
| Overload Protector (phenolic) | Without Overload Protector |
| Painting | Only Primer |
| Phase | 3 |
| Power Factor | 75% |
| Power Factor 100% | 0.8 |
| Product Datasheet | weg-01012ot3e256jm-w40.pdf |
| Rated Amps | 26.3/13.2A |
| Rated Torque | 44.7 lbs.-ft. |
| Rated Voltage | 230/460V |
| Regreasing System | At Drive End And Non-Drive End |
| Rotation | CW And CCW |
| Service Factor | 1 |
| Shaft Locking Device | Without |
| Shaft Material | SAE 1040/45 Carbon Steel |
| Slip | 2% |
| Speed | 1100-1200 RPM , 1176 RPM |
| Starting Method | Direct On Line |
| Synchronous Speed | 1200 RPM |
| Temp. Rise | 80 K |
| Terminal Block | Without |
| Terminal Box | Left Position |
| Torque | 44.1 lbs.-ft. |
| Tropicalized Painting | Without |
| Voltage | 208-230/460V |
Shipping Info:
| Ship weight (kg) | 112.95 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Documentation:
Explore Products
- SPEARS VALVES 3001-060PXI Tee, Socket, 100 PSI, PIP x IPS, 6 Size, PVC
- IPS 909G Wire Stripper
- RITTAL SV 9685540 Busbar Tin-Plated, 40X10 X 900 Mm
- E JAMES & CO 330-3/16C Rubber Cspe 3/16 Inch Thick 12 x 36 In
- MAIN FILTER INC. MF0065244 RVR1225450K10B Interchange Hydraulic Filter, Cellulose, 10 Micron, Seal, 12.67 Inch Height
- LCN 1461-REG DKBRZ Door Closer, Non Hold Open, Non-Handed, 12 1/2 Inch Housing Lg, 3 Inch Housing Dp
- DAYTON 3XA85 Dc Gearmotor 90 Rpm 90v Tenv
- EATON ECL03C2C5A Electrically Held Lighting Contactor, 30A, NEMA 3R, 440-480V/50-60 Hz, 5P, 45 mm Frame
Explore More
- KEYSHAFT
- ROTOR CLIP
- ELOBAU
- ECONOCO
- LS ELECTRIC
- Military Police and Tactical Gloves
- GFCI Receptacles
- Router Accessories
- Float Valve Accessories
- Cylinder Hand Truck Accessories
- AKRO-MILS 30224 Akrobins Plastic Storage Bins
- DWYER INSTRUMENTS 641 Series Air Velocity Transmitters
- MEMPHIS GLOVE Ninja BNF Work Gloves, 15 Gauge, Coated Over the Knuckle
- ANSELL 47-402 Activarmr Comfortable Oil Repellent Gloves For Medium Duty Tasks
- MUELLER INDUSTRIES 185CS-N Simplex Basket Strainers
- APPROVED VENDOR Dielectric Union, FIP x Solder
- TSUBAKI Roller Link Sk-2 Attachment
- ANVIL Pre Galvanized Knock Out Channels
- STRONG HOLD Workbenches
- PIP General Duty Sleeves
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 01012OT3E256JM-W40 14483182 Pump Motor, 10 HP, 1200 RPM, 208-230/460V, ODP, 254/6JM, Footed
€1,856.59 /unit