WEG 00736ET3EHW184TC-S 15228439 Washdown Motor, 7.5 HP, 2 Poles, 182/4TC Frame, 3 Phase, 230/460//190-220/380-415 V, 60 Hz, IC411 TEFC, Foot Mounted
Get it by Tuesday, Aug 25
€2,458.69 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | AC Motor |
| Altitude | 1000 m.a.s.l. |
| Ambient Temp. | -20°C to +40°C |
| Amps | 7.29A |
| Application | Washdown Epoxy |
| Balancing Method | 1/2 Key |
| Bearing Cap | Yes |
| Body Design Material | Rolled Steel |
| Bolt Material | Stainless Steel |
| Break Down Torque | 470% |
| Cold Locked Rotor Time | 39 sec. |
| Connection Cables Quantity | 9 |
| Ct Speed Range | 2:1 |
| De Bearing Seal | Viton Oil Seal With Stainless Steel Spring |
| Degree Of Protection | IP56 |
| Design | B |
| Drip Cover | Without |
| Duty Cycle | Cont.(S1) |
| Efficiency | 89.5% |
| Enclosure Iec | IP56 |
| Enclosure Nema | Tefc |
| Enclosure Rating | IC411 |
| Enclosure Type | Totally Enclosed Fan Cooled |
| Fan Cover Material | Steel |
| Fan Material | Plastic |
| Flange | C |
| Frame | 182/4tc |
| Frame Material | Rolled Steel |
| Frame Size Nema | NEMA 182/4tc |
| Frequency | 50/60 Hz |
| Grade | Grade 1010/20 |
| Grounding Lugs Type | Single |
| Impregnation Method | Dip And Bake Polyester |
| Insulation Class | F |
| Inverter Rating | Inverter Duty |
| Joints Seal | Permatex |
| L. R. Amps | 71.4A |
| Locked Rotor Time(hot) | 22 sec. |
| Locked Rotor Torque | 390% |
| Lrc | 9.8x(Code L) |
| Main Terminal Box Hole | 3/4" |
| Main Terminal Box Hole Type | NPT |
| Material | Carbon Steel |
| Moment Of Inertia | 0.0081 kg/sq. m |
| Mount Arrangement | F1 |
| Mounting | Foot-Mounted, F-1 |
| Nde Bearing Seal | Viton Oil Seal With Stainless Steel Spring |
| No Load Amps | 3.55A |
| No. Of Poles | 2 |
| Noise Level | 65 dBA |
| Output Rating | 4 kW |
| Output Speed | 3475/2895 RPM |
| Overload Protector (phenolic) | Without Overload Protector |
| Painting | Only Primer |
| Rated Torque | 1.37 kgf-m |
| Resilient Base | Without |
| Rotation | CW And CCW |
| Service Factor | 1.15 |
| Shaft Grounded Sgr | Not Available |
| Shaft Material | AISI 304 Stainless Steel |
| Slip | 3% |
| Speed | 2910 RPM |
| Starting Method | Direct On Line |
| Synchronous Speed | 3600 RPM |
| Temp. Code | 200°C |
| Temp. Rise | 80 K |
| Terminal Block | Without |
| Terminal Box | Left Position |
| Tropicalized Painting | Complete (200H) |
| Voltage | 230/460/190-220/380-415V , 415V |
| Vt Speed Range | 1000:1 |
Shipping Info:
| Ship weight (kg) | 39.29 |
| Country of Origin | BR |
Explore Products
- GEMS SENSORS PS76-10-4SSZ-A-EL18 Pressure Switch, 7/16-20 SAE Male Swivel, 15 to 75 PSI, Zinc-Plated Steel Housing, 250 VAC, 5 A 125 VAC
- MURRELEKTRONIK 7700-48521-s4w0030 Cordset, 8-pole, M12 Straight Male to RJ-45 Straight Male, 0.3 m, TPE, M12 x 1 to RJ-45, 1.76 A
- BROWNING 4 1/2 PULL HOLES
- GEARWRENCH 86822 90-Tooth 12 Point GearBox Double Flex Ratcheting Wrench 12x14 mm
- EATON E30AE Pushbutton Operator, 30.5 mm, Square Multifunction, Non-Illuminated, Momentary, Two Button
- HUMBOLDT H-2919 Compressometer-Extensometer with Dial Gauge, 3 Inch x 6 Inch Size
- HUB CITY 0220-77637 Worm Gear Speed Reducers, 182-4TC Input Flange, Hollow Bore Output, Right Angle
- VIKAN 100388 Spare Grip Band Module, Gray, Polypropylene and TPE Rubber, 2.8 Inch Width, 1.9 Inch Height
Explore More
- KEYSHAFT
- ONSRUD
- PENBERTHY
- QUICKSTOP TOOL
- BREEZE HOSE CLAMPS
- Tile Trowels
- Wire Rope Swage Eye Fittings
- Negative Air Machine Accessories
- Humidifier and Dehumidifier Accessories
- Machine Tool Pump Mounting Bracket
- WARN Quick-Connect Power Cables
- CONDOR Cut Resistant Gloves, Cut Level A4, Gray
- CAROL Category 5E Cable
- DWYER INSTRUMENTS DPG-100 Series Digital Pressure Gages
- MUELLER INDUSTRIES 303AP Silent Check Valves
- MILWAUKEE VALVE Low Lead Brass Gate Valve, NPT
- MARTIN SPROCKET Intake End Lugs
- HARLOFF M Series Crash Carts
- TESA BROWN SHARPE Displays
- DIXON Cam And Groove Fuel Gaskets
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 00736ET3EHW184TC-S 15228439 Washdown Motor, 7.5 HP, 2 Poles, 182/4TC Frame, 3 Phase, 230/460//190-220/380-415 V, 60 Hz, IC411 TEFC, Foot Mounted
€2,458.69 /unit