WEG 00712ET3E160MF3-W22 16993583 General Purpose Motor, Cast Iron 160M Frame, 10 HP, 1180 RPM, 230/460 V
Get it by Tuesday, Aug 25
€2,682.46 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | AC Motor |
| Altitude | 1000 m.a.s.l. |
| Ambient Temp. | -20°C to +40°C |
| Balancing Method | 1/2 Key |
| Bearing Cap | Yes |
| Break Down Torque | 350% |
| Cold Locked Rotor Time | 45 sec. |
| Connection Cables Quantity | 12 |
| De Bearing Seal | V Ring |
| Degree Of Protection | IP55 |
| Design | N |
| Drain | Rubber, Automatic |
| Drip Cover | Without |
| Duty Cycle | S1 |
| Enclosure Rating | IC411 |
| Enclosure Type | Totally Enclosed Fan Cooled |
| Fan Cover Material | Cast Iron |
| Fan Material | Plastic |
| Flange | Without |
| Frame | 160m |
| Frame Material | Cast Iron |
| Frequency | 60 Hz |
| Grade | Grade 316 |
| Grounding Lugs Type | Single |
| Impregnation Method | Dip And Bake Polyester |
| Insulation Class | F |
| L. R. Amps | 204/102A |
| Locked Rotor Time(hot) | 25 sec. |
| Locked Rotor Torque | 300% |
| Lrc | 7.4 |
| Main Terminal Box Hole | 2 x M40 x 1.5 |
| Material | Stainless Steel |
| Moment Of Inertia | 2.9 lbs.-sq. ft. |
| Mounting | Foot-Mounted, B3T |
| Nde Bearing Seal | V Ring |
| No Load Amps | 15/7.5A |
| No. Of Poles | 6 |
| Noise Level | 59 dBA |
| Output Rating | 7.5 kW |
| Overload Protector (phenolic) | Without Overload Protector |
| Painting | Only Primer |
| Rated Amps | 27.6/13.8A |
| Rated Speed | 1180 RPM |
| Rated Torque | 44.5 lbs.-ft. |
| Rated Voltage | 230/460V |
| Regreasing System | At Drive End And Non-Drive End |
| Rotation | CW And CCW |
| Shaft Locking Device | Without |
| Shaft Material | SAE 1040/45 Carbon Steel |
| Slip | 1.67% |
| Starting Method | Direct On Line |
| Synchronous Speed | 1200 RPM |
| Temp. Rise | 80 K |
| Terminal Block | Bmc 6 Pins |
| Terminal Box | Top |
| Tropicalized Painting | Without |
| Voltage | 208-230/460/380-415V |
Shipping Info:
| Ship weight (kg) | 121.05 |
Explore Products
- DDS 253808TC Rotary Shaft Oil Seal, Tc, Nitrile, 25 mm ID, 38 mm Od, 8 mm Width, 7 Psi
- 3M 7000046892
- PT COUPLING 2800210 B-Coupler BSP, 1 Inch Size, Type B, Male BSP Threaded, Polypropylene
- PARKER 07F37BC
- WALTER TOOLS AEP2356302-UNF5/8 6245728 Spiral Flute Tap, 5/8-18 Thread Size, 15 mm Thread Length, 100 mm Length, Thl
- APPROVED VENDOR R25-1.5-80-3A-ESP O-Ring
- ACCUFORM SIGNS tcl324ev5 TDG HAZARD CLASS 3 SHIPPING LABEL TCL324EV5
- QUANTUM STORAGE SYSTEMS WR86-1472C Wire Shelving, Starter Unit, 4 Shelves, 14 x 72 x 86 Inch Size, Chrome Finish
Explore More
- KEYSHAFT
- PELTOR
- ROLL PRODUCTS
- WHIZARD
- INTERNATIONAL ENVIROMENTAL
- Multi-Bit Screwdrivers
- Sanitary Butterfly Valves
- Battery Operated Sump Pumps
- Cable Tie Kits
- Bronze Blanks, Flats, Bars, Plates and Sheet Stock
- DESTACO 7-101, 7-58, 7-59, 7-60 Heavy Duty Cam Action Series
- ML KISHIGO High Visibility Vests, Lime
- ANSELL 11-423 Hyflex Heat Resistant Industrial Gloves
- CONDOR ANSI Class 2 Mesh Polyster Zipper Contrasting High Visibility Vests
- TEMPCO Screw Plug Immersion Heaters, 316 Stainless Steel Element
- TOUGH GUY Bowl Brush
- SPEARS VALVES FKM Full Faced Flange Gaskets
- APPROVED VENDOR 1/2"-20 Fully Threaded Standard Hex Cylindrical Alloy Steel Socket Head Cap Screws
- BALDOR / DODGE VSC, Wide-Slot Takeup, Ball Bearings
- SIOUX CHIEF Slip Nuts, Brass
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 00712ET3E160MF3-W22 16993583 General Purpose Motor, Cast Iron 160M Frame, 10 HP, 1180 RPM, 230/460 V
€2,682.46 /unit