FREE delivery on orders over €150
WALTER TOOLS CNMG120404-NM4 WAM30 Diamond Turning Insert, Neutral, 3/16 Inch Thick, 1/64 Inch Corner Radius
Item: CU9LYAModel: CNMG120404-NM4 WAM30Cross Ref: 53UT49
7 In Stock
Ships within 2 days via
10.00% off
€27.50 /unit
This product can only be shipped in multiples of 10Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Turning Insert |
| Ansi Code | CNMG431-NM4 WAM30 |
| Chip-breaker Code | NM4 |
| Clearance Angle | 0° |
| Corner Radius | 0.016" |
| Cutting Application | Turning |
| Cutting Direction | Neutral |
| Cutting Edge Length | 12.9 mm |
| Included Angle | 80° |
| Inscribed Circle | 1/2" |
| Insert Code | CNMG431 |
| Insert Holding Type | Straight Hole |
| Insert Style | CNMG |
| Material | Carbide |
| Number Of Cutting Edges | 2 |
| Primary Material Application | Stainless Steel |
| Rake | Negative |
| Shape | Rhombic |
| System Of Measurement | Imperial |
| Thickness | 0.188" |
Shipping Info:
| Ship weight (kg) | 0.17 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
| Country of Origin | DE |
Product Variants
| Model | Insert Code | Corner Radius | Clearance Angle | Cutting Direction | Insert Style | Thickness | Inscribed Circle | Chip-breaker Code | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| CCGT060202-X5 WTP35 | CCGT.5 | 0.008" | 7° | Neutral | CCGT | - | - | X5 | €40.13 | |
| CCGT060202-X5 WAK15 | CCGT.5 | 0.008" | 7° | Neutral | CCGT | - | - | X5 | €39.70 | |
| CCGT060202-X15 WTP35 | CCGT.5 | 0.008" | 7° | Neutral | CCGT | - | - | X15 | €40.13 | |
| CCGT060202-X15 WXM15 | CCGT.5 | 0.008" | - | Neutral | CCGT | - | - | X15 | €39.70 | |
| CCGT060204-X5 WTP35 | CCGT1 | 1/64" | 7° | Neutral | CCGT | - | - | X5 | €40.28 | |
| CCGT060204-X15 WXM15 | CCGT1 | 1/64" | - | Neutral | CCGT | - | - | X15 | €39.23 | |
| CCGT060204-X5 WXM15 | CCGT1 | 1/64" | 7° | Neutral | CCGT | - | - | X5 | €39.70 |
Explore Products
- APPROVED VENDOR WWG-0625-6000GB Machine Key, Tapered Gib Head, 5/8 In Square, 6 In Lg., Steel
- HAMILTON S-MDD-124SYT Dual Wheel Swivel Caster 12000 Lb 12 Inch Ureth
- HALLOWELL DRHC723684-3S-E-PT Boltless Shelving Starter Unit 655 lb.
- AME INTERNATIONAL TPM20221AK Parts Kit
- SEALMASTER MP-56 701886 Pillow Block Bearing, 3 1/2 Inch Bore, Cast Iron, Set Screws, 4 Inch Shaft Ht
- EATON HMX040A4NAPEP3 Adjustable Frequency Drive, 40A, 30HP, With Output Contactor, NEMA Type 1, FS6, 480V
- EATON B29CGE30TX3E008 Non-Reversing Starter, Lugs W/O Quick Connect Terms, 30 A, 24 V, 1.6-8 A
- GRAINGER ZUSA-HT-4781 Tubing, Santoprene, Tpv, Natural, 3 mm Inside Dia, 5 mm Outside Dia, 100 Ft Overall Length
Explore More
- GRATING FASTENERS
- KANT-TWIST
- KEYSHAFT
- METRO
- ONILOC
- Water Suction and Discharge Hoses
- Wet Mop Kits
- Pin Assortments
- Concrete Rakes and Movers
- Vortex Tubes
- AKRO-MILS 35185 Nest And Stack Totes
- CONDOR Cold Condition Insulated Gloves, Hi Visibility Orange
- KRYTOX 240AZ Series Aerospace Grade Fluorinated Grease
- DESTACO 375-M Series Pull Action Latch Clamps
- TRACERLINE UV Leak Detection Kits
- WOODHEAD 130014 Series Male Receptacle
- VERMONT GAGE Reversible Gage Single End Handles, Metric
- BALDOR / DODGE EZ Kleen, GTBEZ, Two-Bolt Pillow Block, Ball Bearings
- MERIT BRASS 4520 304 Stainless Steel Seamless Nipples, Schedule 80
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WALTER TOOLS CNMG120404-NM4 WAM30 Diamond Turning Insert, Neutral, 3/16 Inch Thick, 1/64 Inch Corner Radius
€30.56 /unit