WALTER TOOLS CNMA120412 WAK10 Carbide Turning Insert Cnma 1/2 Inch
Get it by Wednesday, Feb 25
€ 24,99 Flat Shipping + VAT € 24,99 flat shipping is applicable on orders with an aggregate weight less than 10kg. Orders exceeding 10kg will be charged default shipping rates.
5.00% off
€28.30 /unit
This product can only be shipped in multiples of 10Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Turning Insert |
| Ansi Code | CNMA433 WAK10 |
| Chip-breaker | Yes |
| Chip-breaker Code | NM |
| Clearance Angle | 0° |
| Coating | Chemical vapor deposition |
| Corner Radius | 3/64" |
| Cutting Application | Turning |
| Cutting Direction | Neutral |
| Cutting Edge Length | 12.9 mm |
| Grade | Grade WAK10 |
| Included Angle | 80° |
| Inscribed Circle | 1/2" |
| Insert Code | CNMA433 |
| Insert Holding Type | Straight Hole |
| Insert Material | Carbide |
| Insert Size | 1/2" |
| Insert Style | CNMA |
| Iso Number | CNMA120412 WAK10 |
| Manufacturer Grade | Wak10 |
| Material - Machining | Carbide |
| Measurement System | Fractional Inch |
| Mounting Style | Screw Held |
| No. Of Edges | 8 |
| Nose Radius | 0.031" |
| Number Of Cutting Edges | 8 |
| Primary Material Application | Cast Iron |
| Primary Material Application Iso Code | K |
| Rake | Negative |
| Relief Angle | 0 Degrees |
| Relief Angle | 0° |
| Shape | Rhombic |
| Style | CNMA |
| Thickness | 3/16" |
Shipping Info:
| Ship weight (kg) | 0.1 |
| Ship height (cm) | 1.09 |
| Ship length (cm) | 9.8 |
| Ship width (cm) | 3.99 |
| HS code | 8209000030 |
| Country of Origin | DE |
Product Details:
- Cast Iron (K) Compatibility (Yes)
- Hardened (H) Compatibility (No)
- Non Ferrous (N) Compatibility (No)
- Stainless (M) Compatibility (No)
- Steel (P) Compatibility (No)
- Super Alloy (S) Compatibility (No)
Product Variants
| Product | Model | Thickness | Insert Style | Inscribed Circle | Corner Radius | Chip-breaker Code | Insert Code | Clearance Angle | Primary Material Application | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
CCGW060204TM-2 WBH10 | 3/32" | CCGW | 1/4" | 1/64" | TM-2 | CCGW21.51 | 7° | - | €157.02 | |
|
CCGW060208TM-2 WBH20 | 3/32" | CCGW | 1/4" | 1/32" | TM-2 | CCGW21.52 | 7° | - | €157.02 | |
|
CCGW09T304TM-2 WBH10 | 5/32" | CCGW | - | 1/64" | TM-2 | CCGW32.51 | 7° | - | €157.02 | |
|
CCGW09T308TM-2 WBH10 | 5/32" | CCGW | 3/8" | 1/32" | Tm-2 | CCGW32.52 | 7° | - | €157.02 | |
 |
CCMT09T308-PM WKK10S | 5/32" | CCMT | 3/8" | 1/32" | PM | CCMT32.52 | 7° | Cast Iron | €27.63 | |
 |
CCMT160508 WPP20 | 7/32" | CCMT | 5/8" | 1/32" | FP | CCMT52 | 7° | Steel | €47.23 | |
 |
CNGA120404TM-2 WBH10 | 3/16" | CNGA | 1/2" | 1/64" | TM-2 | CNGA431 | 0° | - | €152.47 |
Explore Products
- STREN-FLEX EEF3-912-18 Web Sling Eye Eye 18 Feet Length 46000 Lb Cap
- MJ MAY 461V-A-2405 Roll Stock, 5 Feet Length, 24 Inch Wide, 0.005 Inch Thickness
- APPROVED VENDOR 2AVC9 Rod Aluminium 2024 1 1/2 Inch Diameter x 3 Feet Length
- STEARNS BRAKES 105601100NQF Brake, NEMA2 230/460VAC
- EATON CPX07564AAL1RA Filtered Variable Frequency Drive, 75 HP, 480 VAC, 21-1/2Inch Wide
- SPEC C02100182000M Compression Spring, 1.2 lbs/In Stiffness Rate, 1.5 lbs Load Capacity, Carbon Steel
- PEER CHAIN 43666 Sprocket, 1 Inch Size, Finished Bore, Hardened Teeth, Black Oxide
- APPROVED VENDOR 45669 Fully Threaded Stud, 3/8 In - 24 Thread Size, SS, 1 1/2 In Lg., Gr. 18-8
Explore More
- BANNER STAKES
- KEYSHAFT
- MASTER APPLIANCE
- PHILIPS ADVANCE
- ROTOZIP
- Pegboards
- Backflow Preventer Repair Kits
- Expansion Shields
- Cable Pulling Jaw Grips
- Socket Accessories
- MECHANIX M-Pact Multicam Tactical Impact Resistant Gloves
- TYGON 2375 Chemical Resistant PVC Tubings
- ANVIL AF035 Series Model K Lateral Sway Brace, Electro Galvanized
- GLOBE SCIENTIFIC Flange Plug Caps, For 16mm Tubes
- CLEVELAND CONTROLS High Carbon Steel Metric Taps
- EATON XT IEC Series Contactors, Frame D
- GATES V Belt Pulleys
- GRAINGER Pipe And Conduit Thread Dies
- JACOBS CHUCK Plain Bearing Chucks, Medium Duty, Thread Mounted
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WALTER TOOLS CNMA120412 WAK10 Carbide Turning Insert Cnma 1/2 Inch
€29.79 /unit