WALTER TOOLS CCMT120404-PM WAK20 Carbide Turning Insert Ccmt 1/2 Inch
Get it by Thursday, Dec 18
This product can only be shipped in multiples of 10
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Turning Insert |
| Ansi Code | CCMT431-PM WAK20 |
| Chip-breaker | Yes |
| Chip-breaker Code | PM |
| Clearance Angle | 7° |
| Coating | Chemical vapor deposition |
| Corner Radius | 1/64" |
| Cutting Application | Turning |
| Cutting Direction | Neutral |
| Cutting Edge Length | 12.9 mm |
| Depth Of Cut | 0.5 mm to 4 mm |
| Finish - Machining | Ticn+Al2O3+Tin |
| Grade | WAK20 |
| Included Angle | 80° |
| Inscribed Circle | 1/2" |
| Insert Code | CCMT431 |
| Insert Holding Type | 40° to 60°Countersink Hole |
| Insert Material | Carbide |
| Insert Size | 1/2" |
| Insert Style | CCMT |
| Iso Number | CCMT120404-PM WAK20 |
| Manufacturer Grade | WAK20 |
| Material - Machining | Carbide |
| Measurement System | Fractional Inch |
| Mounting Style | Screw Held |
| No. Of Edges | 2 |
| Nose Radius | 0.016" |
| Number Of Cutting Edges | 2 |
| Primary Material Application | Cast Iron |
| Primary Material Application Iso Code | K |
| Rake | Positive |
| Relief Angle | 7 Degrees |
| Relief Angle | 7° |
| Shape | Rhombic |
| Style | CCMT |
| Thickness | 3/16" |
| Wiper Insert | Yes |
| Workpiece Material | Iron |
Shipping Info:
| Ship weight (kg) | 0.1 |
| Ship height (cm) | 1.09 |
| Ship length (cm) | 9.8 |
| Ship width (cm) | 3.99 |
| HS code | 8209000030 |
| Country of Origin | DE |
Product Variants
| Product | Model | Insert Code | Corner Radius | Grade | Chip-breaker Code | Nose Radius | Depth Of Cut | Insert Style | Clearance Angle | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
CCMT120408-PM5 WAK20 | CCMT432 | 1/32" | WAK20 | PM5 | 0.031" | - | CCMT | 7° | €34.86 | |
|
CCMT120408-PM5 WPP20 | CCMT432 | 1/32" | WPP20 | PM5 | 0.031" | - | CCMT | 7° | - | RFQ
|
 |
CCMT120408-PM5 WSM30 | CCMT432 | 1/32" | Grade WSM30 | PM5 | 0.031" | - | CCMT | 7° | €34.44 | |
|
CCMT120412-PM WPP20 | CCMT433 | 3/64" | WPP20 | PM | 0.047" | 0.7 mm to 4 mm | CCMT | 7° | - | RFQ
|
Explore Products
- BALDOR / DODGE 2MB98X3/4 2BK100 Light Duty Fixed Bore Sheave
- LINEMASTER 936-SWH Foot Switch
- KUNKLE 6130FEM01ALM Safety Relief Valve, F Orifice, 1 Inch Inlet Size, Metal, Steam, Stainless Steel
- BALDOR / DODGE M12C25T10235 MW1283 250-CC 102.35 Tapered Shaft Mounted Reducer
- TSUBAKI RS16-1B60F-2G
- MARTIN SPROCKET 6 C 120 Q Sheave, 6.250 Inch Face Width, 12.4 Inch Outside Dia., 12 Inch Pitch Dia., Cast Iron
- CONDOR 6GPZ5 Tacky Floor Mat, 24 x 30 Inch Sheet Size, 1.5 mil Sheet Thick, Polyethylene Film
- ECEF 460575 Drill, 5,75mm Diameter, Fully Grounded
Explore More
- ADD-A-LEVEL
- KEYSHAFT
- MITUTOYO
- BONA
- VERIS
- General Purpose AC Motors
- Vertical Handle Toggle Clamps
- Pneumatic Check Valves
- Ladder Safety Cages
- Sprinkler Heads
- CHICAGO PROTECTIVE APPAREL ARC Flash Jacket And Bib Kit
- ANVIL 260SW Series Anti-Vibration Safety Washers
- ANVIL AS1100 Series Rigid Steel Conduit Clamps, Electro Galvanized
- ANVIL AS617 Series Three Hole Swivel Plates
- GLOBE SCIENTIFIC Translucent Snap Caps, For 12/13 mm Tubes
- PARKER Female Elbow, 90 Degrees, FNPT, Brass
- POLYSCIENCE Benchtop Chill Modern Design Pump
- DAYTON Blower 12 5/8 Inch
- EDWARDS SIGNALING Cast Marine Air Horns
- ELDON JAMES Elbows
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WALTER TOOLS CCMT120404-PM WAK20 Carbide Turning Insert Ccmt 1/2 Inch