FREE delivery on orders over €150
WALTER TOOLS A3143-0.28 5062862 Micro Drill Bit, #85 Drill Bit Size, 1/16 Inch Flute Length, 1 mm Shank Dia
Item: CU8YKFModel: A3143-0.28Cross Ref: 440P42 / 5062862
7 In Stock
Ships within 2 days via
5.00% off
€19.10 /unit
This product can only be shipped in multiples of 10Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Micro Drill Bit |
| Circuit Board Drill | No |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Cutting Edge Dia. | 0.011" |
| Cutting Edge Length | 0.055" |
| Decimal Equivalent | 0.011 |
| Depth X Dia. Ratio | 5xd |
| Drill Bit Point Angle | 118° |
| Drill Bit Point Type | 2 Facet Point |
| Drill Bit Size | #85 |
| Drill Diameter Tolerance | -0.004 mm to 0 mm |
| Finish | Bright, Uncoated |
| Finish - Machining | Bright (Uncoated) |
| Flute Length | 1/16" |
| Flute Type | Spiral |
| Grade | High Performance |
| Material | High Speed Steel |
| Material - Machining | High Speed Steel |
| Material Grade - Machining | HIGH PERFORMANCE |
| Max. Drilling Depth | 0.075" |
| Measurement System | Wire |
| Number Of Flutes | 2 |
| Overall Length | 25 mm |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Steel, Titanium |
| Primary Material Application Iso Code | K, N, P, S |
| Secondary Material Application | Composite, Graphite, Stainless Steel |
| Secondary Material Application Iso Code | M, O |
| Shank Dia. | 1 mm |
| Shank Length | 23.1 mm |
| Shank Type | Straight |
| Shank Type - Machining | Straight |
| Standards | Din 1899 |
Shipping Info:
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
| Country of Origin | FR |
Explore Products
- BEHRINGER SYSTEMS G5ST1038-PP BEHRINGER PIPE SYSTEMS G5ST1038-PP
- LIBERTY PUMPS LSG203M Grinder Pump 2 HP 208-230 Voltage
- EDWARDS SIGNALING 145LEDMB48240AB LED Panel Beacon, Blue, 48/240VAC, Black
- EATON XTAE032C01R016 Non-Reversing Electronic Motor Starter, 32 A, 12 V 50/60 Hz, 1Nc, C Frame, 45 mm, 12-16 A
- EATON A27CGC25B016 Non-Reversing Purpose Starter, 575 V, 208-240 V, 50/60 Hz, Common Wiring, 25 A, 10-16 FLA
- DYNALON 159565-2 29 Tube Holder Blood Bank Clear Width 2.5
- WINTERS INSTRUMENTS PFH1246 Ss Liquid Filled Gauge, 4 Inch, 0/160 Psi/Kpa Brass 1/2 Inch, Btm
- PLAST-O-MATIC CKS150VS-NC-PF Check Valve, PVDF, Socket Connection, FKM Seal, 1-1/2 Inch Size
Explore More
- KEYSHAFT
- Packaging Tape Hand Held Dispensers
- Keyway Broach Sets
- Plunger Pump Accessories
- Label Protectors
- Cork Sheet Stock
- HELICOIL Straight Flute Bottoming Taps, 2B
- ANVIL Single Run Packs, Black
- BURNDY AMS Dual Rated Splicers/Reducers
- MAYHEW TOOLS Pilot Punches, Metric
- KLEIN TOOLS Belt
- ASHLAND CONVEYOR Skatewheel Conveyor
- AKRO-MILS 30090 Shelfmax Shelf Bins
- WRIGHT TOOL 1/2 Inch Drive Impact Extensions
- CLEVELAND Counterbores with Interchangeable Pilots
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WALTER TOOLS A3143-0.28 5062862 Micro Drill Bit, #85 Drill Bit Size, 1/16 Inch Flute Length, 1 mm Shank Dia
€20.10 /unit